Environmental geochemistry of the River Gomti: A tributary of the Ganges River

Water and sediment samples collected from the Gomti River, a tributary of the Ganges River system, during the postmonsoon season have been analyzed to estimate major elemental chemistry. Water chemistry of the River Gomti shows almost monotonous spatial distribution of various chemical species, especially because of uniform presence of alluvium Dun gravels throughout the basin. The river annually transports 0.34×10⁶ tonnes of total suspended material (TSM) and 3.0×10⁶ tonnes of total dissolved solids (TDS), 69 percent of which is accounted for by bicarbonate ions only. Samples collected downstream of the city of Lucknow show the influence of anthropogenic loadings for a considerable distance in the river water. Na⁺, Cl^–, and SO₄ ^2– concentrations build up downstream. The bed sediment chemistry is dominated by Si (36 percent), reflecting a high percentage of detrital quartz, which makes up about 74 percent of the mineralogy of the bed sediments in the River Gomti. The average Kjeldahl nitrogen concentration (234 g/g) indicates indirectly the amount of organic matter in the sediments. The Hg concentration in sediments has been found to be higher (average 904 ppb) than the background value. The suspended sediments are well sorted, very finely skewed, and extremely leptokurtic, indicating a low energy condition of flow in the Gomti River. The influence of chemical loads in the Gomti has been found to be small or nonexistent on the Ganges River, perhaps because the water discharge of the Gomti (1.57 percent) to the Ganges is quite low.     

Rate constants for the reactions of the NO3 radical with HCOOH/HCOO− and CH3COOH/CH3COO− in aqueous solution between 278 and 328 K

The kinetics of the aqueous phase reactions of NO₃ radicals with HCOOH/HCOO^– and CH₃COOH/CH₃COO^– have been investigated using a laser photolysis/long-path laser absorption technique. NO₃ was produced via excimer laser photolysis of peroxodisulfate anions (S₂O ₈ ^2– ) at 351 nm followed by the reactions of sulfate radicals (SO ₄ ^– ) with excess nitrate. The time-resolved detection of NO₃ was achieved by long-path laser absorption at 632.8 nm. For the reactions of NO₃ with formic acid (1) and formate (2) rate coefficients ofk ₁=(3.3±1.0)×10⁵ l mol^–1 s^–1 andk ₂=(5.0±0.4)×10⁷ l mol^–1 s^–1 were found atT=298 K andI=0.19 mol/l. The following Arrhenius expressions were derived:k ₁(T)=(3.4±0.3)×10¹⁰ exp[–(3400±600)/T] l mol^–1 s^–1 andk ₂(T)=(8.2±0.8)×10¹⁰ exp[–(2200±700)/T] l mol^–1 s^–1. The rate coefficients for the reactions of NO₃ with acetic acid (3) and acetate (4) atT=298 K andI=0.19 mol/l were determined as:k ₃=(1.3±0.3)×10⁴ l mol^–1 s^–1 andk ₄=(2.3±0.4)×10⁶ l mol^–1 s^–1. The temperature dependences for these reactions are described by:k ₃(T)=(4.9±0.5)×10⁹ exp[–(3800±700)/T] l mol^–1 s^–1 andk ₄(T)=(1.0±0.2)×10¹² exp[–(3800±1200)/T] l mol^–1 s^–1. The differences in reactivity of the anions HCOO^– and CH₃COO^– compared to their corresponding acids HCOOH and CH₃COOH are explained by the higher reactivity of NO₃ in charge transfer processes compared to H atom abstraction. From a comparison of NO₃ reactions with various droplets constituents it is concluded that the reaction of NO₃ with HCOO^– may present a dominant loss reaction of NO₃ in atmospheric droplets.     

Brønsted reactions on oxide mineral surfaces and the temperature-dependence of their dissolution rates

The pH-dependence of oxide dissolution rates is controlled by Brønsted acid-base reactions at the mineral surface. These reactions are rapid but depend explicitly on temperature, as do the subsequent slow rates of bond hydrolysis. The net result is that dissolution rates vary in a complicated fashion with temperature and solution pH. The enthalpy changes of acid-base reactions on oxide materials are sufficiently similar, however, that general statements can be made about their contribution. The enthalpy changes from proton adsorption to a hydroxyl functional group (SOH), or to a deprotonated functional group (SO ^–), are generally exothermic. The enthalpy changes become increasingly endothermic, however, as charge accumulates on the mineral surface and the charged species interact electrostatically. The result is that mineral dissolution rates are least sensitive to temperature, as measured with an Arrhenius-like rate law, at pH conditions near the Point of Zero Net Proton Charge.     

Palaeoclimatic studies in South Shetland Islands,Antarctica, based on numerous stratigraphic variables in lake sediments

The hitherto longest found lake sediment sequence on Byers Peninsula, Livingston Island, South Shetland Islands, was analysed with respect to lithology, chronology, diatoms, Pediastrum, pollen and spores, mosses, mineralogy, and sediment chemistry. During the ca. 5000 year long development the sediments were influenced by frequent tephra fall-outs. This volcanic impact played a major role in the lake's history during two periods, 4700–4600 and 2800–2500 BP, but was of importance during the lake's entire history with considerable influence on many of the palaeoenvironmentally significant indicators. The large and complex data set was analysed and zonated with different types of multivariate analysis. This resulted in a subdivision of the sequence into 8 time periods and 21 variables. Redundancy analysis (RDA) of this data set, both without and with the tephra periods, and with 4–6 of the variables as explanatory environmental variables, reveal that climatic/environmental signals are detectable. The palaeoclimatic picture that emerged out of the tephra noise suggests that the first 100 years were characterized by mild, humid conditions. This was followed by a less mild and humid climate until ca. 4000 BP when a gradual warming seems to have started, coupled with increased humidity. These mild and humid conditions seem to have reached an optimum slightly after 3000 BP. At ca. 2500 BP a distinct climatic deterioration occurred with colder and drier conditions and long seasons with ice cover. This arid, cold phase probably reached its optimum conditions at ca. 1500 BP, when slightly warmer conditions might have prevailed for a while. Except for the modern sample with rather mild climate, the last 1400 years seem to have been fairly arid and cold, and the effects of the frequent volcanic activity during this period is only vaguely seen in the records.     

涠西南地区岩石特性及钻井液技术研究

北部湾盆地涠西南油田群是南海西部重要的原油产区，同时油田群紧邻众多国家级自然保护区，属于环境敏感区域。针对北部湾盆地涠西南地区环保要求，以及涠洲组和流沙港组钻井过程经常出现井壁失稳导致的憋卡、起下钻阻卡等问题，开展了涠西南地区地层泥页岩特性及环保钻井液技术研究。通过地层岩石黏土矿物分析、孔喉结构分析以及理化性能评价，明确了涠西南地区泥页岩井壁失稳的机理；提出以类油基的水溶性复合基基液为核心，构建了一套具有油基钻井液工程特性和水基钻井液环保特性的新型环保防塌钻井液技术，并进行了相关的现场应用。现场应用显示：应用井与邻井相比，12-1/4″井段阻卡划眼时间减少，井径扩大率大幅度降低，并且在128 h的长时间浸泡过程中没有复杂情况产生，有效地解决了涠洲组、流沙港组易失稳地层的井壁稳定问题；同时，钻井液环保性能达到一级海域环保要求，可以替代目前应用的油基钻井液体系，解决了海上使用油基钻井液存在配制成本高、含油钻屑需全回收及环境危害隐患大等技术难题。该研究对于涠西南油田环保、井壁失稳和钻井液技术发展具有较高的理论价值和借鉴意义。     

Role of dykes in induced seismicity at Bhatsa reservoir,Maharashtra, India

The geological and hydrological conditions near the reservoir site play an important role in the generation or absence of seismic activity. Near Bhatsa reservoir, along the west coast of India intense seismic activity occurred during August–September 1983, after a lag of six years of initial impounding. From July 1983 to September 1990, 15,388 earthquakes (mostlyM ₁<3.0) were recorded, the largest being of magnitude 4.9. The spatial distribution of well located 172 earthquakes suggest a strong correlation between the epicenters and the disposition of dykes and faults around the Bhatsa region. It is inferred that these dykes have acted as barriers for the diffusion of water from the reservoir, thereby becoming zones of instability due to increased pore pressure not only along them but also over the volume they bound.     

Numerical study of droplet size dependent chemistry in oceanic,wintertime stratus cloud at southern mid-latitudes

Cloud droplet chemistry is modelled for the first 150 m of rise in a wintertime, mid-latitude, marine stratus cloud using observations made at and near the Cape Grim Baseline Station as a source of input parameters. The emphasis in this work was to study the variation in droplet chemistry as a function of both droplet size and nucleus composition, with a particular focus on the way in which oxidation of dissolved sulfur dioxide varied.At 150 m above the condensation level, solute concentration as a function of droplet size was found to increase by as much as 2 to 3 orders of magnitude for only a factor of 2 increase in droplet radius, primarily as a consequence of the 1/r dependence in the droplet growth equation. This type of size dependence exists at all levels in the model cloud, and has a significant influence on oxidation rate of sulfur dioxide in droplets growing on sulfate nuclei, oxidation by ozone being favoured in the smallest droplets, but oxidation by hydrogen peroxide being favoured in the larger droplets. Oxidation by ozone is favoured at all sizes in droplets formed on sea-salt nuclei as a result of the initially high alkalinity of these droplets, and in the cloud overall is calculated to be the more important oxidation pathway. Although based on a simplified chemical scheme, these results suggest that both size-dependent and nucleus-dependent chemistry of cloud droplets may need to be considered explicitly in cloud modelling work.Volume-weighted mean pH values in the range 5 to 6 were predicted from sensitivity studies in which input variables were varied over reasonable ranges, in agreement with two sets of bulk cloud-water pH data obtained by aircraft near Cape Grim.     

Seasonal variation of atmospheric dimethylsulfide at Amsterdam Island in the southern Indian Ocean

Daily measurements of atmospheric concentrations of dimethylsulfide (DMS) were carried out for two years in a marine site at remote area: the Amsterdam Island (37°50S–77°31E) located in the southern Indian Ocean. DMS concentrations were also measured in seawater. A seasonal variation is observed for both DMS in the atmosphere and in the sea-surface. The monthly averages of DMS concentrations in the surface coastal seawater and in the atmosphere ranged, respectively, from 0.3 to 2.0 nmol l^-1 and from 1.4 to 11.3 nmol m^-3 (34 to 274 pptv), with the highest values in summer. The monthly variation of sea-to-air flux of DMS from the southern Indian Ocean ranges from 0.7 to 4.4 mol m^-2 d^-1. A factor of 2.3 is observed between summer and winter with mean DMS fluxes of 3.0 and 1.3 mol m^-2 d^-1, respectively.     

Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.