Helium-argon isotopic tracing for the Pb-Zn-Ag polymetallic ore deposits in the central-south segment of the Da Hinggan Ling Range

In recent years big strides have been made in the exploration of ores in the central-south segment of the Da Hinggan Ling Range, though some debates still exist on the metallogenesis and sources of ore-forming materials. Pyrite and other sulfides in direct relation to the Pb-Zn-Ag ore deposits were chosen for the He and Ar isotopic analysis of ore-forming fluids, and the first He and Ar isotope data have been obtained from the study region. ^3He/^4He ratios in 14 samples collected from 7 mining districts are 2.17×10^-6-12.52×10^-6, averaging 6.86×10^-6 and their R/Ra ratios are 1.56-9.01 Ra, averaging 4.37 Ra. By projecting the data points onto the ^3He-^4He concentrations diagram, all the points fall near the mantle helium area. The calculated mantle-source helium ratios are within the range of 19.58%-76.96%, with an average of 49.52%. Argon isotopic characteristics are close to those of mantle source, indicating that the ore-forming material was transport upwards via the multi-stage evolution of mantle plume and concentrated as ores in the favorable loci of mantle branch structures.     

The New Meteorite Fall of Yanzhuang—A Severely Shocked H6 Chondrite with Black Molten Materials

At 21:45 hr (Beijing time) on Oct. 31, 1990 the Yanzhuang meteorite hit the ground at the Yanzhuang village, Wenyuan County, Guangdong Province. Several fragments, totalling 3.5 kg, were recovered during the field survey. This meteorite is a rare one of its kind due to its heavily shocked features and thick veins made up of black molten materials. Olivine and low-calcium pyroxene are compositionally homogeneous with Fa=18.59, Fs=16.35 and Wo=1.29. The chemical composition (total Fe=28.0%) and recrystallized texture of the chondritic mass show that the Yanzhuang is an H6 chondrite. The black molten materials occur in the form of blocks (up to 2×3×4 cm in size) and veins (0.1–15 mm in width), and contain a lot of rounded and elliptic FeNi-FeS blobs (up to 6–10 mm in length). The metal in these blobs exhibits distinct dendritic structure characteristic of rapid cooling. Unmolten and molten samples are very similar in chemical composition, fitting well with the average H-chondrites. Partial melting and FeNi/FeS-silicate separation have not been observed in the molten materials of the Yanzhuang. This project was financially supported by the Science Foundation of Guangdong Province.     

岩土体注浆技术初探及展望

从我国注浆技术的发展入手,详细地分析和评述了岩土体注浆技术的关键问题：注浆材料及浆液、注浆参数确定、注浆方法、注浆工艺、注浆监控与检测等的研究方法和现状,结合具体的工程实例,对涉及的技术难题进行了归纳和总结;同时,针对目前岩土体注浆技术存在的一些不足之处,提出了研究思路和展望。     

复杂地层钻进中可控复合浆液的研制

复杂地层钻进中常用的注浆材料需要良好的时间可控性和固结体强度,因此研制一种可控时间、增加固结体强度、效果良好的注浆浆液是有意义的。针对以上问题,利用正交试验的方法研制了一种复合注浆材料。在不饱和聚酯中添加水泥及引发剂、促进剂使浆液在要求时间内固化,最终配方的固化时间为62 min,抗压强度为32.6 MPa。该浆液作为化学浆液具有可注性好、浆液粘度低、能注入到细微裂隙中的优点,固结体强度高,并且塑性性能良好,由于在浆液中添加了水泥,降低了成本,较之一些化学浆液有一定的优势。     

贵州上二叠统龙潭组煤系地层地球化学特征及物源分析:来自黔普地1井的证据

为厘清贵州上二叠统龙潭组煤系地层的物源,以黔西南地区黔普地1井为研究对象,采集了上二叠统龙潭组的岩心进行稀土元素分析。结果表明,龙潭组的稀土总量较高(177.03×10^-6～592.58×10^-6),轻、重稀土分馏明显,稀土元素配分模式呈轻稀土富集、重稀土相对亏损的右倾型;(La/Sm)_N为2.63～4.72,(Gd/Yb)_N值为1.47～2.218,表明轻稀土分馏较重稀土严重;δEu无异常。研究表明,其形成的构造环境与大陆边缘与大陆弧相近,推测黔普地1井二叠系龙潭组物质来源以玄武岩为主。     

安徽铜陵地区含金硫化物矿床成矿作用

铜陵地区位于华中地洼区,苏鄂地洼系。具工业价值的金矿床多赋存于地洼期次一级构造以及它们的交汇处,这是本区构造控矿的特点。近矿围岩以地台型碳酸盐岩为主,矿体明显受地层层位控制。与矿化有关的侵入岩,主要形成于地洼期(燕山早、中期)。岩体形成后叠加了成矿热液的多次活动。金的成矿作用及金矿床的形成,通常与含金丰度相对较高的地台构造层有密切的成因联系,它们提供了重要的物质来源,可认为是矿源层(Source beds)。本区各主要矿床是以地洼型岩浆期后热液作用为主的多因复成层控含金硫化物矿床。     

双能CT成像基材料分解法的理论误差分析

双能X射线计算机断层成像技术(DECT)能够准确地重建物质的有效原子序数和电子密度信息,是一种有效的物质辨别技术。基材料分解法是求解DECT重建问题的主要方法之一。但目前应用此方法得到的重建结果误差较大,并且对于金属伪影抑制能力也较差。本文分析了DECT基材料分解法重建结果的误差来源和形成机制,阐释了其对金属伪影抑制作用差的原因,并推导出了该方法的理论误差计算公式,为分析方便,本文使用了两个单能进行研究。最后,对基材料分解法重建的适用条件提出了建议,一般情况下,该方法对低Z材料误差较小,对高Z材料误差较大。     

圆钢管约束高强灌浆料局部承压性能研究

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。     

兰坪白秧坪铜银多金属矿床成矿物质来源的铅和硫同位素示踪

白秧坪铜银多金属矿床主要产于白垩系下统景星组石英砂岩、粉砂岩中,矿石铅同位素组成特征与景星组砂岩的铅同位素组成比较接近,表明壳源物质参与了成矿作用。作ZartMan图解和Δγ-Δβ图解表明,矿石铅属于壳幔混合来源。矿石铅μ值介于9.43~9.65之间,Th/U比值介于3.72~3.87之间,表明矿石铅为壳幔混合铅。该矿床硫同位素组成表明,硫来源于深部地幔硫遭受地壳硫的混入。该矿床的成矿作用发生于开放体系之中,成矿物质来源为深部幔源物质混合了壳源物质。     

Drilling Technology of the M-1 Well in Hot Dry Rock of Matouying,Tangshan北大核心CSCD

This paper presents the general situation and key techniques of the drilling well M-1 in Matouying dry hot rock exploration hole, Leting, Tangshan, Hebei Province. A series of problems have been studied on the sea water drilling fluid, high temperature resistant fresh water drilling fluid, screw composite drilling technique, screw hole coring technology, and high temperature, thus solving the difficulty of sea water drilling fluid well protection, poor stability of drilling fluid under high temperature, and low efficiency in hot dry rock drilling and coring drilling to ensure the safety of the borehole and improve drilling efficiency. The high temperature resistant double condensation and double density cement slurry system and relevant technical measures are adopted to ensure the quality of cementing in the high temperature environment. Through the understanding and analysis of the strata in this area, this work provides valuable experience for drilling in the same strata in the future. The final hole depth of the M-1 well in Matouying is 4502. 11m, and hot dry rock with a temperature of 150t is found at 3965 m, which is the first hot dry rock well with a temperature of more than 150°C in the Beijing-Tianjin-Hebei region so far. © 2022 Editorial Board of Geology and Exploration. All rights reserved.