近50 a渭河流域洪水成因分析及防治对策

 通过对近50 a渭河流域洪水的年际变化、月际变化和潼关高程变化的综合分析得出，造成该流域洪水灾害的原因有降水量年内分配不均和年际变化大，滩面淤积加重，支流河口淤塞以及河势、流态的恶化等。针对这些原因，根据渭河流域洪水灾害的特点，提出了相应的防治措施，即降低下游高程，减少河道的淤积，增大河道泄洪能力；利用水库进行调水调沙，引进客水冲刷渭河下游；防洪工程要除险加固，提高防洪标准与抗洪能力；恢复林草植被，遏止水土流失，从源头上控制泥沙入河等。     

Heavy metal contents in soil of major towns in the east coast of Peninsular Malaysia

A total of 63 soil samples from 3 different soil profiles （urban, suburban and industrial areas） in major towns in the east coast of Peninsular Malaysia were analyzed for the total concentrations of Cu, Zn, Pb, Ni and Cr. The soil samples were subjected to acid digestion and the concentrations of total metals extracted were measured or flame atomic absorption spectrometry and inductively coupled plasma - atomic emission spectrometry. According to the result of this study, Pb and Zn concentrations in urban soils are much higher than those of industrial and suburban soils. Total concentrations of Cu and Cr in industrial soil samples are high compared to other two soil profiles and Ni concentrations in the suburban area are slightly higher those of urban and industrial soils. Since Malaysia has not yet to come up with her own soil maximum allowable limit, the heavy metal concentrations were compared with the Dutch maximum allowable limit. The results indicated that the median of heavy metals values in the three different soil profiles is still below the Dutch system limit. From the maximum allowable value obtained from the Dutch system, a contamination/pollution （C/p） index for each site was calculated for the set of these five heavy metals. An advantage of using this method is to make a differentiation between pollution （C/p〉1） and contamination （C/p〈1） status in soils as well as being able to characterize each status into 5 different categories （slight, moderate, severe, very severe and excessive）.     

Elements pollution in the extremely high tumor risk residents in Chaoshan littoral, southern China

Background ＆ aim： To investigate and analyze the elements pollution in the extremely high tumor risks residents in the Chaoshan littoral, southern China. Methods： 19 elements including Cr, Mn, Ni, Sr, Pb, Zn, Co, Sn, Th, Tl, Se, Hg, Cu, Mo, Cd, Sb, U, Ge, As, and Al were measured from 145 hair samples of residents from the high-risk Nanao Island （mortality of cancer 173-156/106 in recent 30 years）, Shantou high-risk village （mortality of cancer 230.4/106 in recent three years）, and two controls Shanwei （mortality of cancer 32/106 in 1970s） and Meizhou Hakka （incidence of cancer 103/106 ） using AAS, AFS, ICP-MS methods collaborated with Beijing University. And 21 samples of water, 18 samples office from the Nanao Island, Shantou high-risk village, and other low-risk controls were measured using the same methods. Results： The element analysis showed that levels of CD, PB in the Shantou high-risk village were the highest, Hg, MN, SR, SB, TH, U on the Nanao Island were the highest in hairs. Conclusions： It is indicated that there occurred elements pollution among the local high-risk population.     

Boron isotopic geochemistry of karst groundwater in Guiyang City, China

Boron has two stable isotopes （^10B and ^11B） with relative abundances of about 20% and 80%, respectively. Boron isotopic ratios in natural materials show a huge range of variations, from -70‰ to ＋60‰, when expressed with the classical δ^11B notation. Most of these isotopic variations occur at the surface of the Earth. Hence, boron isotopic composition can be used as a sensitive tracer in geochemical study, for instance, to identify the different sources of contamination and factors controlling the salinity of groundwater. During the last decade, boron isotopes have been used to discriminate between the influences of seawater intrusion and anthropogenic discharge. But few of those researches can precisely identify the different sources of contamination. We measured the boron concentrations and boron isotopic ratios of groundwater samples collected in Guiyang City, as well as the major ions. The results indicate that the major ion composition of the groundwater in the investigated area is mainly controlled by the interactions between water and the dominant rock i.e. carbonates. All the water compositions are characterized by high concentrations of Ca^2＋, Mg^2＋, HCO3^-, SO4^2-, and NO3^-, which are the dominant contaminants. Both dissolved boron concentrations and isotopic ratios show large variations among the ground waters, from 2 μg/L to 90 μg/L and from -6‰ to ＋26‰, respectively. The boron concentrations and isotopic ratios indicate that the river across the studied city has been seriously contaminated by urban discharge. Boron concentrations of fiver water samples varied from 20 μg/L to 140 μg/L, with an average δ^11B value of ＋2.0‰. Using boron isotopic compositions and different geochemical indices allowed us to clearly identify and distinguish the two major sources of contamination, agricultural activity and urban wastewater. Both of the two sources are characterized by high boron concentrations but their boron isotopic compositions significantly differ.     

Occurrence of microorganic pollutants in the atmosphere of Singapore during haze and non-haze periods

Microorganic pollutants such as polycylic aromatic hydrocarbons （PAHs）, organochlorine pesticides （OCPs）, polychlorinated biphenyls （PCBs） and total petroleum hydrocarbons （TPHs） are known to be present in urban ambient air. These organic compounds are prone to atmospheric transport and deposition over long distances, thus enabling them to accumulate even in regions remote from their sources. Deposition from the atmosphere can be via direct deposition and exchange with crops that may be directly or indirectly ingested by humans. It can also take place via wet and dry deposition and air-water exchange. Following their deposition, these microorganic pollutants tend to accumulate in soils, sediments and in human and ecological food chains. There are many reports in the literature on the atmospheric concentrations of microorganic pollutants, but there are few reports and data in Asia. This study was performed in Singapore to determine the relative amounts of persistent organic pollutants and TPHs in ambient aerosols. One of the important sources of these organic compounds in Southeast Asia is thought to be biomass burning （vegetation fires）. Hence, air sampling was conducted during both smoke haze and non-haze periods. The data obtained from this study will be presented and discussed.     

Fuzzy expert system for economic zonation of an ornamental slate deposit

Investigation of deposits for traditional extraction activities (metals and coal) has generally been based on determining grade, or content, of the required material. In order to apply the grade concept to an ornamental rock such as slate, it is first necessary to define the variables that determine both the geotechnical recovery rate for the rock mass — which conditions the size of the extracted blocks – and the aesthetic features of the slate — which define the quality of the slabs as potential roofing material.

For this research, geotechnical and aesthetic data for a slate deposit were collected from 16 continuous core borehole samples. A fuzzy expert system was then developed using this data, defining the rock mass recovery rate and slab quality in accordance with the criteria of a slate expert, producing as a final output a zonation of the deposit in terms of top quality slate, medium quality slate or waste.

A mathematical model based on fuzzy logic was chosen due to the fact that the boundaries between different quality groups in a deposit are not clearly distinguished. Moreover, quality also depends on a company's infrastructures for transformation of the blocks, and also on its commercial strategies.     

Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects

Heavy metal distribution patterns in river sediments aid in understanding the exogenic cycling of elements as well as in assessing the effect of anthropogenic influences. In India, the Subernarekha river flows over the Precambrian terrain of the Singhbhum craton in eastern India. The rocks are of an iron ore series and the primary rock types are schist and quartzite. One main tributary, the Kharkhai, flows through granite rocks and subsequently flows through the schist and quartzite layers. The Subernarekha flows through the East Singhbhum district, which is one of India’s industrialised areas known for ore mining, steel production, power generation, cement production and other related activities. Freshly deposited river sediments were collected upstream and downstream the industrial zone. Samples were collected from four locations and analysed in <63-μm sediment fraction for heavy metals including Zn, Pb, Cd and Cu by anodic stripping voltammetry. Enrichment of these elements over and above the local natural concentration level has been calculated and reported. Sediments of the present study are classified by Muller’s geo-accumulation index (I _geo) and vary from element to element and with climatic seasons. During pre-monsoon period the maximum I _geo value for Zn is moderately to highly polluted and for Cu and Pb is moderately polluted, respectively, based on the Muller’s standard. Anthropogenic, lithogenic or cumulative effects of both components are the main reasons for such variations in I _geo values. The basic igneous rock layer through which the river flows or a seasonal rivulet that joins with the main river may be the primary source for lithogenic components.     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October