皱纹盘鲍鳃的光镜和电镜研究

用光镜、扫描电镜和透射电镜观察了皱纹盘鲍鳃的组织学和超微结构.鳃叶上皮按结构与功能可区分为5个区带:前纤毛柱状上皮区、立方上皮区、侧纤毛柱状上皮区、呼吸上皮区及后纤毛柱状上皮区.侧纤毛是产生呼吸水流的重要动力来源.呼吸上皮区具大小不等的褶皱,上皮细胞高度仅约为～8 μm,具密集的微绒毛,其结构有助于气体交换.     

太平洋牡蛎配子和精子入卵的扫描电镜观察及胚胎发育的初步研究

通过扫描电镜观察 ,太平洋牡蛎精子由头部、中段和尾段组成。精子全长约 2 1 .6μm ,尾段长约 1 8.2 μm ,末端观察到“针眼”样结构 ;头部最大处的直径约 2 .6μm ;中段直径约 1 .1 μm ;未成熟精子尾段中部出现膨大 ,该处直径约 0 .3μm。卵呈梨形 ;卵的直径约为 41 .9μm。卵表面有微绒毛组成的皱折结构 ,可见卵黄膜孔。卵质收回时 ,在卵表面卵柄处可见明显的树枝状结构。受精后 ,受精卵表面的卵黄膜剥离处可见较多数量的皮质小泡。在水温2 1 .2～ 2 3.5℃ ,精卵混合 34min时 ,释时出第 1极体 ;1h2 2min时 ,放出第 2极体 ;2 1h55min时 ,胚胎发育至初期D形幼虫。     

Structures and magnetic behaviours of TiO2—Mn—TiO2 multilayers

The TiO₂--Mn--TiO₂ multilayers are successfully grown on glass and silicon substrates by alternately using radio frequency reactive magnetron sputtering and direct current magnetron sputtering. The structures and the magnetic behaviours of these films are characterised with x-ray diffraction, transmission electron microscope (TEM), vibrating sample magnetometer, and superconducting quantum interference device (SQUID). It is shown that the multi-film consists of a mixture of anatase and rutile TiO₂ with an embedded Mn nano-film. It is found that there are two turning points from ferromagnetic phase to antiferromagnetic phase. One is at 42 K attributed to interface coupling between ferromagnetic Mn₃O₄ and antiferromagnetic Mn₂O₃, and the other is at 97 K owing to the interface coupling between ferromagnetic Mn and antiferromagnetic MnO. The samples are shown to have ferromagnetic behaviours at room temperature from hysteresis in the M--H loops, and their ferromagnetism is found to vary with the thickness of Mn nano-film. Moreover, the Mn nano-film has a critical thickness of about 18.5 nm, which makes the coercivity of the multi-film reach a maximum of about 3.965times 10 ^{- 2} T.     

青岛海域大面积聚集漂浮浒苔的显微观测

对近期在青岛海域大面积聚集漂浮的浒苔（Enteromorpha prolifera （Muell）J．Ag）进行常规显微镜观察,发现细胞内存在大小约1μm的可动的颗粒状结构。分别采用鞭毛染色和扫描电镜观察的方法对其进行了初步研究,均未发现此颗粒状可动结构具有鞭毛。用透射电镜对浒苔细胞的超微结构特征进行了观察,显示浒苔细胞壁致密而厚,每个浒苔细胞有1个片状叶绿体,贴近于细胞壁分布,淀粉粒含量丰富,但依然未发现胞内颗粒状结构具有鞭毛。     

凡纳滨对虾造血激素的组织分布及细胞定位分析

造血激素（astakine）是一种具有促进造血组织细胞分化和增殖作用的甲壳动物细胞因子,参与甲壳动物的造血活动,对于只依赖于非特异性免疫的甲壳动物抗感染能力有重要的意义。本实验室前期成功克隆凡纳滨对虾造血激素（LvAST）的基因Lvast。为了进一步了解其功能,本文通过实时荧光定量PCR技术检测了Lvast表达的组织分布,同时还用Dlight标记抗LvAST抗体进行了LvAST在对虾细胞和组织中的免疫荧光定位分析。荧光定量PCR测定结果说明,Lvast主要在肝胰腺、鳃和肌肉中大量表达,而淋巴器官和血淋巴细胞中表达量较低;免疫荧光结果显示,LvAST可同时存在于血淋巴细胞内和血淋巴细胞膜表面,不同的血淋巴细胞表面的LvAST分布呈现出明显差异,可能具有重要的血细胞分类意义。LvAST的蛋白在肝胰腺、鳃、肌肉、淋巴器官等组织中均有分布,并且肝胰腺组织中分布较多,淋巴器官组织中分布较少。     

Application of scanning X-ray analytical microscope to the petrographic characterization of a ductile shear zone: an alternative method to image microstructures

A ductile shear zone within a metasomatic biotite band in the Ryoke granite, Teshima, SW Japan, has been studied using the scanning X-ray analytical microscope (SXAM). This enabled the quantitative distributions of major elements, such as Si, K, Fe, Al and Ca, to be determined within the shear zone. These element maps were processed to transform them into images showing the distribution of minerals such as quartz, biotite, plagioclase and K-feldspar, which form the major minerals within the biotite band and the granite protolith. Mineral profiles based on these mineral maps compared with the simple shear strain profile reveal that the shear zone is most intense where quartz and biotite have been substituted for the primary mineral assemblage of the granite protolith, suggesting that the stresses imposed on the granite caused the shear strain to localize along the biotite band to produce the observed shear zone. It appears that the rheological behavior changed around 50–60% of quartz modal composition.     

利用原子力显微镜与能谱-扫描电镜研究页岩孔隙结构特征

已有研究表明页岩中纳米孔隙与组成导电膜的金颗粒处在同一量级,使得页岩中纳米孔隙在一定程度上被金颗粒掩埋,导致页岩中纳米孔隙被“二次改造”,从而无法真实观察到页岩中孔隙的形态特征;其次,由于受仪器分辨率、景深等因素的制约,无法观察到孔隙的三维展布特征。因此,如何真实地揭示纳米孔隙的空间结构特征,以及如何有效避免金颗粒对页岩储层中纳米孔隙的“二次改造”一直是微区分析的难点。本文通过扫描电镜（SEM）与原子力显微镜（AFM）方法组合观察到四川盆地龙马溪组黑色页岩中有机孔与无机孔在二维平面的分布存在较强的非均值性,孔径与孔隙的空间延展性呈现明显的正相关关系。有机孔呈蜂窝状分布,孔径主要分布在微米量级0.1~0.4μm,孔隙在三维空间呈现明显的“一体化”特征,具有较好的空间连通性;无机孔主要发育黏土矿物的层间孔隙,孔径主要分布在纳米量级16~57nm,此外见少量的矿物粒内不规则状溶蚀孔。研究认为,页岩中孔隙在二维平面的非均值性导致孔隙、喉道的分布会发生突变,从而影响储层的储集性能;页岩中孔隙在三维空间的非均值性导致页岩储层的渗透率在纵向上出现较大的差异,从而影响储层的物性特征。     

养殖锯缘青蟹呼肠孤样病毒粒子的电镜观察

经过对患病青蟹Scylla serrata的组织进行了超薄切片电镜观察,在病蟹的鳃上皮细胞、心肌细胞、胃和肠道上皮细胞中发现了大量的呼肠孤样病毒粒子。该病毒粒子的大小为60 nm左右,二十面体对称,无囊膜,在感染组织细胞浆中呈晶格状排列。根据病毒的形态特征和组织分布形态,初步认为该病毒为水生呼肠孤病毒,暂将其命名为青蟹呼肠孤病毒(Scylla serratareo-like virus,Ss-REO)。     

蛾螺科、织纹螺科和细带螺科腹足类齿舌的形态学研究

利用光学显微镜对8种蛾螺科种类、3种织纹螺科种类和1种细带螺科种类的齿舌形态进行了观察和比较。结果表明,3科12个种的齿舌均由2列侧齿和1列中央齿构成,无缘齿,齿式为0·1·1·1·0。蛾螺科种类(方斑东风螺、泥东风螺、台湾东风螺、深沟东风螺、缝合海因螺、香螺、甲虫螺和Antillophos sp.)的侧齿具小齿2—3枚,中央齿具小齿3—7枚。织纹螺科种类(半褶织纹螺、秀长织纹螺和红带织纹螺)的侧齿具小齿2枚,中央齿具小齿9—13枚,其基板的两端常延伸至下一齿排附近。半褶织纹螺具侧齿附板,秀长织纹螺和红带织纹螺无侧齿附板。塔形纺锤螺的侧齿呈长形的梳子状,具小齿9—12枚,中央齿极小,具小齿3枚。与其他学者的研究结果不同,本研究未发现东风螺属种类的齿舌具有种特异性。侧齿附板不存在于所有织纹螺科的种类中,其有无也不能作为同属或同亚属种类的共性。     

A holistic computational model for prediction of clay suspension structure

The formation of clay suspensions involves complex interactions among clay particles subjected to the geochemical environment during the sedimentation process. The structural characteristics have a major influence on the physical and mechanical behavior of the suspension. A modeling framework involving a Discrete Element Method (DEM) model with customized particle mechanical interactions is proposed in this paper for the holistic prediction of the physical structure of clay suspensions. The particle interaction force model is based on the Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory that accounts for electrostatic repulsion, van der Waals attraction, contact repulsion, etc. Kaolinite is used as the model clay to demonstrate the model performance. The surface charge density of kaolinite is obtained through Atomic Force Microscope (AFM) force measurement and is implemented in the particle interaction force model in the subsequent simulations. Influencing factors, such as centrifugal acceleration, ionic concentration, platy structure of particles, and particle size, on the formation of kaolinite suspensions are studied with the numerical model and compare favorably well with the experimental data. This work lays down a unique framework consisting of computational modeling and microscale characterization of clay particles to holistically predict the characteristics of clay suspensions, which paves the basis to model and predict their bulk physical and mechanical behavior.