准噶尔盆地的类型和构造演化

准噶尔盆地的早二叠世属于裂谷还是前陆盆地 ,存在意见分歧 ;晚二叠世—老第三纪盆地的性质也不确定。文中通过对盆地构造几何学、沉降史、热史及火山岩的综合分析研究 ,对盆地类型和构造演化获得了一些新的认识 :( 1)准噶尔盆地在早二叠世为裂谷 ,晚二叠世为热冷却伸展坳陷 ,三叠纪—老第三纪为克拉通内盆地 ,新第三纪至今 ,由于印度板块与亚洲大陆碰撞才形成陆内前陆盆地。 ( 2 )对石炭纪—早二叠世的岩浆活动结合区域构造资料的研究表明 ,准噶尔地区古生代的板块运动和造山作用具软碰撞特点 ,早二叠世的裂谷盆地是在软碰撞背景下造山带伸展塌陷的产物。 ( 3)地幔热对流作用可能是软碰撞造山后伸展塌陷的主要深部动力学机制。     

Zircon U-Pb-Hf isotopic and geochemical characteristics of the Xierzi biotite monzogranite pluton,Linxi, Inner Mongolia and its tectonic implications

The opening, subduction and final closure of the Paleo-Asian Ocean led to the formation of the Central Asian Orogenic Belt. Controversy has long surrounded the timing of final closure of the Paleo-Asian Ocean. Here we present zircon U-Pb ages and petrological, geochemical and in situ Hf isotope data for the Xierzi biotite monzogranite pluton, Linxi, SE Inner Mongolia. U-Pb dating of zircon by LA-ICP-MS yields a middle Permian emplacement age(268.7 ± 2.3 Ma) for the Xierzi pluton that is dominated by biotite monzogranites with high SiO_2(71.2-72.8 wt.%),alkali(Na_2 O + K_2 O =8.05-8.44 wt.%), Al_2 O_3(14.4-15.2 wt.%) and Fe_2 O_3~T relative to low MgO contents, yielding Fe_2 O_3~T/MgO ratios of 2.87-3.44, and plotting within the high-K calc-alkaline field on a SiO_2 vs. K_2 O diagram. The aluminum saturation indexes(A/CNK) of the biotite monzogranites range from 1.06 to 1.19, corresponding to weakly to strongly peraluminous. They are enriched in rare earth elements(REE), high field strength elements(HFSEs; Zr,Hf). and large ion lithophile elements(LILEs; Rb, U, Th). The LREEs are enriched relative to the HREEs,with a distinct negative Eu anomaly in a chondrite-normalized REE diagram. Geochemically, the Xierzi biotite monzogranite is classified as an aluminous A-type granite, with all samples plotting within the A2-type granite field on a Y/Nb vs. Rb/Nb diagram. Zircon ε_(Hf)(t) values and two-stage modal ages of the zircons within the pluton range from +4.80 to +13.65 and from 983 to 418 Ma, respectively, indicating that the primary magma was generated through partial melting of felsic rocks from juvenile crust.Consequently, these results demonstrate that the Xierzi pluton formed under the post-orogenic extensional setting after arc-continent collision in the middle Permian.     

汾渭地堑的河流阶地对第四纪时期印度-欧亚板块碰撞带的构造响应

秦岭造山带前缘的汾渭地堑是新构造运动非常活跃的地区,地堑内发育了一系列第四纪河流阶地。通过对河流阶地及其沉积物的沉积学、土壤地层学、年代学及形成机制的研究,得到以下认识:渭河地堑发育了5级河流阶地,这些阶地均由底部的河床相和其上的第四纪风成沉积组成,这5级阶地最底部的黄土地层分别是L₃₃,L₁₅,L₉,L₆和L₂。在磁性地层学和气候地层学基础上,通过与深海氧同位素记录的对比,上述黄土层分别对应于深海氧同位素阶段104,36,22,16 和6;阶地年龄分别为2.60Ma,1.20Ma,0.90Ma,0.65Ma和 0.15Ma。新构造作用在渭河地堑的5级河流阶地的形成中起了决定性的作用,汾渭地堑及上述由正断层控制的河流阶地的形成与华北板块内部的NW-SE向地壳拉张密切相关,而后者与印度板块向北俯冲导致扬子板块与华北板块沿秦岭走滑断层的相对运动有直接联系,所以上述阶地的形成时期也正是第四纪时期印度板块向北阶段性俯冲加剧的时期。     

印度-欧亚板块碰撞期间红河断裂带活动性的数值模拟研究

红河断裂带是一巨型走滑断裂带,在印度板块与欧亚板块碰撞过程中成为印支地块和华南地块之间相互运动的主位移带。通过有限差分数值模拟试验,结果表明,在碰撞期间,红河断裂带首先经历了左旋走滑运动,红河断裂带中央部分的左旋偏移量最大,达到约325km,印支地块向南东挤出,在5Ma BP后表现为右旋走滑,说明沿红河断裂带的剪切运动是红河断裂带西端与印度-欧亚碰撞边界之间距离的函数,随时间而减小并控制了印支地块与华南地块之间的相对运动。     

虚拟视景仿真中实体行为建模技术的研究

对实体的运动轨迹建模、碰撞检测、地形跟随、时空一致性等技术进行了探讨，并给出实验原型。     

由恐龙化石论晚白垩世事件沉积

本文根据晚白垩世恐龙化石的分布结合地层学特征,初步提出了这套含有恐龙化石的晚白垩世地层属于事件沉积的观点,并认为导致这次事件沉积的原因可能是由天体撞击地球产生的强海啸形成。     

影响碰撞造山成岩成矿模式的因素及其机制

基于分析陆内俯冲过程物质的活化迁移规律建立了碰撞造山成岩成矿模式,认为仰冲板片上依次出现热液矿床带、花岗岩基带和斑岩带。探讨了陆内俯冲的角度、速度、俯冲板片物质成分、地热梯度等因素对陆内俯冲成岩成矿模式空间分带模型的影响,推导了有关的变异形式,在充分显示碰撞造山成岩成矿模式之科学性和实用性的同时,为在碰撞造山带或陆内俯冲区进行实际找矿提供了理论参考。     

山东省前寒武纪几个基础地质问题

根据１∶５万区调及科研所取得的新资料、新成果,论述了山东前寒武纪几个基础地质问题：关于山东大地构造划分问题;山东早元古宙粉子山群与荆山群的关系;山东前寒武纪侵入岩的填图方法。     

湘桂早海西期构造层序地层与板内构造运动

该文在分析地层界面性质的基础上建立了湘桂地区早海西阶段的构造层序地层格架,并据此探讨了研究区早海西阶段的板内伸展裂陷活动及晚期的板内软碰撞以及软碰撞带对湘中同沉积外生矿产的控制意义。     

Hydrodynamic shape optimization of thin floating plates

In this work, the problem of optimizing the shape of a thin floating plate (sometimes called a dock) to maximize radiation damping is investigated. The plate is modeled with zero draft and floats on the surface of an irrotational, incompressible ocean of infinite extent. For simplicity, only rigid heave motions are considered. The flow problem is analyzed using the Chen and Mei variational principle wherein the potential field inside a hemisphere surrounding the plate is represented using a spherical harmonic expansion and matched on the hemisphere to an outer field described by distributing sources on the hemisphere. The plate shape is parameterized using a Fourier series which is suitable for use with the variational principle. Gradients of the damping coefficient with respect to the shape parameters are developed by solving an adjoint flow problem whose potential is shown to be a scalar multiple of the original flow potential. Optimal plate shapes are determined using the well-known optimization code NPSOL which makes use of the damping coefficient calculation and gradients.