真空预压联合电渗加固高塑性软土的试验研究

为处理常规排水固结法难以处理的高塑性软土,进行了真空预压联合电渗加固的大比尺室内模型试验研究。试验首先对塑性指数为26～29的高塑性软土进行真空预压的加固,待固结度达到80%后启动电渗进行加固。试验中对电流、电势和表层沉降等进行了全面的监测。试验结果表明电极反转、间歇通电技术有利于提高电能的利用率。土体强度由加固前的0～7.1kPa增长到加固后的18.2～26.2kPa。后期电渗对强度增长的贡献十分明显。     

利用自然γ能谱测井资料确定粘土矿物的含量及其应用

根据粘土矿物含量的图版计算方法,计算了实际井段的粘土矿物含量,分析了高岭石、伊利石和蒙脱石与U、Th、K含量的相关关系,由此分析得到粘土矿物含量与放射性元素含量的多元线性关系,建立了粘土矿物含量计算的回归方程。通过对不同井段以及同一井段不同地层数据建立的回归方程分析,给出了具有代表性的线性回归方程模型。根据一个实际井段粘土矿物的计算,获得粘土矿物含量随深度的变化,其粘土矿物含量计算结果与原测井解释相吻合,同时与岩心分析误差在10%左右。     

基于ECDIS的多数据源支持技术分析

利用多源地理空间数据集成和融合理论,研究了基于ECDIS的多数据源支持技术。介绍了常用的多源海图数据及其使用原则,分析了ECDIS多数据源支持技术的特点及内涵,总结了国内外常用多源海图数据集成方法,从数据可用性角度探讨了提高国产电子海图系统适用性的措施。     

船舶定线制在海图上的表示方法分析

详细介绍了船舶定线制的起源以及在国内的应用情况,结合实例分析船舶定线制的完整体系,提出自己的分类方法,重点探讨船舶定线制这种复杂要素在海图上的表示原则和方法,以及如何在航海通告中明确表述该要素。     

Computational study on the modification of a bounding surface plasticity model for sands

The accurate simulation of complex dynamic phenomena requires the availability of advanced constitutive models capable of simulating a wide range of features of soil behaviour under cyclic loading. One possible strategy is to improve the capabilities of existing bounding surface plasticity models, as this framework is characterised by its modularity and flexibility. As a result, specific components of the formulation of this type of model may be adjusted to improve the reproduction of any aspect of soil behaviour deemed essential to the problem being analysed. In this paper, a series of computational studies are performed in order to establish the impact of expanding a bounding surface plasticity model for sands on its modelling capabilities and to suggest ways of mitigating the associated increase in complexity. Changes to three distinct aspects of the selected constitutive model are examined: the shape of the Critical State Line in p′ − e space, the expression used for calculating the hardening modulus and the form of the yield surface. It is shown that the introduced changes have the potential to increase significantly the ability to control how certain aspects of soil response, such as degradation of stiffness and flow liquefaction with limited deformation, are reproduced by the model. Moreover, this paper presents a systematic approach to the expansion of this type of constitutive model, establishing how alterations to the formulation of a model may be assessed in terms of improved accuracy and potential benefits.     

国际标准海图的解析与三维显示研究

在．NET环境下,利用C#语言,研究并从底层实现了符合S-57规范的国际标准海图的解析,并将解析出的海图数据与遥感影像,DEM数据进行三维叠加显示,增强了海图显示的真实性,对于海图的应用与发展有一定的意义。     

Fabric dilatancy and the plasticity modeling of granular media

A novel conceptual model of the mechanics of sands is developed within an elastic–plastic framework. Central to this model is the realization that volume changes in anisotropic granular materials occur as a result of two fundamentally different mechanisms. The first is purely kinematic, dilative, and is the result of the changes in anisotropic fabric. There is also a second volume change in granular media that occurs as a direct response to changes in stress as in a standard elastic/plastic continuum. The inclusion of the two sources of volume change results in three important datum states. When subjected to isotropic strains, the resulting stress state in granular materials is not isotropic but lies upon the kinematic normal consolidation line. There exists a state at which the fabric‐induced volumetric strain rate becomes equal to the stress‐induced volumetric strain rate making the total plastic volumetric strain rate equal to zero. Granular response changes from contractive to dilative at this phase transformation line. The third datum state is the one in which the stress‐induced volumetric strain rate is zero. The sand, however, continues to dilate at this state with the difference between stress and dilation ratio a constant as predicted by Taylor's stress–dilatancy rule. These predictions are shown in accordance with experimental data from a series of drained tests and undrained on Ottawa sand. Copyright © 2011 John Wiley & Sons, Ltd.     

均质土坡潜在滑面的搜索

均质土坡潜在滑面的确定 ,是对均质土坡进行稳定性计算的必要前提。传统的以瑞典圆弧法为代表的刚体极限平衡方法 ,虽然能够确定出均质土坡的滑面 ,但工作量较大 ,使用不方便。因此 ,在塑性极限分析方法的基础上 ,提出了一种新的搜索滑面的方法     

A Generalized Backward Euler algorithm for the numerical integration of an isotropic hardening elastoplastic model for mechanical and chemical degradation of bonded geomaterials

An extended version of the classical Generalized Backward Euler (GBE) algorithm is proposed for the numerical integration of a three‐invariant isotropic‐hardening elastoplastic model for cemented soils or weak rocks undergoing mechanical and non‐mechanical degradation processes. The restriction to isotropy allows to formulate the return mapping algorithm in the space of principal elastic strains. In this way, an efficient and robust integration scheme is developed which can be applied to relatively complex yield surface and plastic potential functions. Moreover, the proposed algorithm can be linearized in closed form, thus allowing for quadratic convergence in the global Newton iteration. A series of numerical experiments are performed to illustrate the accuracy and convergence properties of the algorithm. Selected results from a finite element analysis of a circular footing on a soft rock layer undergoing chemical weathering are then presented to illustrate the algorithm performance at the boundary value problem level. Copyright © 2002 John Wiley & Sons, Ltd.