福建省水氡观测资料变化规律与质量分析

本文对福建省水氡观测资料变化规律进行分析,并试图利用相对均方差、拟合噪声水平和相对年变幅等三项指标,对福建省8个水氡点的观测资料质量进行初步探索。     

Discussion on influence of cavern’s span on surrounding rock classification

The influence of cavern’s span on surrounding rock classification is getting more and more recognition along with large span underground working’s increasingly coming forth. The authors analyse the timbering expense of cavern in jointed rock mass, the radius of plastic loosened zone and the size effect of macroscopical mechanical parameters of rock mass. Based on the complexion of depressing of surrounding rock’s stability due to increment of cavern’s span, the authors pinpoint attaching importance to the influence of cavern’s span on surrounding rock classification; and suggest reckoning the factor of cavern’s span in surrounding rock classification scientifically by studying the size effect of rock mass’s physico-mechanical parameters.     

Plastic Deformation and Recrystallization of Garnet: A Mechanism to Facilitate Diffusion Creep

Elongate and deformed garnets from Glenelg, NW Scotland, occurwithin a thin shear zone transecting an eclogite body that hasundergone partial retrogression to amphibolite facies at circa700°C. Optical microscopy, back-scattered electron imaging,electron probe microanalysis and electron back-scatter diffractionreveal garnet sub-structures that are developed as a functionof strain. Subgrains with low-angle misorientation boundariesoccur at low strain and garnet orientations are dispersed, aroundrational crystallographic axes, across these boundaries. Towardshigh-strain areas, boundary misorientations increase and thereis a loss of crystallographic control on misorientations, whichtend towards random. In high-strain areas, a polygonal garnetmicrostructure is developed. The garnet orientations are randomlydispersed around the original single-crystal orientation. Somegarnet grains are elongate and Ca-rich garnet occurs on thefaces of elongate grains oriented normal to the foliation. Commonly,the garnet grains are admixed with matrix minerals, and, wherein contact with other phases, garnet is well faceted. We suggestthat individual garnet porphyroclasts record an evolution fromlow-strain conditions, where dislocation creep and recoveryaccommodated deformation, through increasing strain, where dynamicrecrystallization occurred by subgrain rotation, to higheststrains, where recrystallized grains were able to deform bydiffusion creep assisted grain boundary sliding with associatedrotations. KEY WORDS: diffusion creep; EBSD; garnet; plastic deformation; recrystallization     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.     

Elastoplastic model with loading memory surfaces (LMS) for monotonic and cyclic behaviour of geomaterials

A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd.     

基于规则的OpenStreetMap数据模型转换

周边区域地理信息的获取是我国地缘环境研究中的一个难题,志愿者地理信息(volunteered geographic information,VGI)的兴起为解决该难题提供了一个可行的方法。在目前一系列的VGI项目中,OpenStreetMap(OSM)是比较领先的应用,但OSM数据模型不同于我国周边应用的专业矢量数据模型,因此,利用OSM数据时首先需要对其进行模型转换。有鉴于此,本文提出了一种基于规则的OSM数据到专业应用矢量数据模型转换方法。该方法首先利用OSM定义的几何类型与地物属性作为分类依据,建立了模型转换基本规则库;对于志愿者根据自己的理解自行标注未包含在基本规则库中的目标采用人机交互方式进行模型转换,并在此过程中不断完善规则库,利用越南与巴基斯坦数据进行实验,最终形成了包括2 344条转换规则的模型转换规则库,为OSM数据模型到专业应用矢量数据模型的转换提供了一条可行途径。     

重要性权值的驾车导航POI表达规则

在导航电子地图中,针对驾车任务的POI自适应表达是提高导航电子地图信息传输效率的关键。针对这一问题,提出了基于重要性权值的驾车导航POI表达规则。首先,分析了POI重要性权值的影响因素;其次,从影响因素出发,研究了基于权值的POI规则表达的各规则项;最后,设计了POI自适应表达规则库,并在嵌入了数据处理规则库的绘图软件上进行了技术实现。试验结果表明,利用基于权值的POI表达规则进行地图表达,可以提高地图内容的层次性与清晰性,优化驾车导航服务。     

有限圈闭复杂沥青质稠油层钻井难点与对策

中东YD油田为海相碳酸盐岩地层,Kazh地层分布着活跃的非均质沥青质稠油,高压并含有酸性气体,为非目的层,需要钻穿并封隔该层后对下部产层进行开发。由于沥青质稠油层分布不均,孔隙压力不确定,对钻井工程造成了极大的挑战。在一期施工中,3口井由于沥青质稠油的侵入被迫工程弃井,未能实现工程目的。针对此世界性难点问题,开展了沥青质稠油侵入机理实验研究、固化剂研制、控压钻井技术应用等一系列配套工艺技术研究,提出了复杂沥青质稠油层安全钻井技术对策,现场应用取得较好的效果。