东太平洋地区DSDP573孔始新世末期的微玻璃陨石

通过研究 DSDP5 73孔的岩心样品 ,首次在该孔始新世与渐新世的界线地层含金属粘土层中发现了微玻璃陨石 ,且主要富集在其底部。一个样品 (5 g)中最多可达 12粒。这些微玻璃陨石主要呈球形、椭球形。用电子探针测试了其化学成分 ,Si O2 含量为 2 9.6 4%～ 5 8.93%,Al2 O3 为 3.42 %～ 2 0 .96 %,Fe O为 9.98%～ 2 9.5 5 %,Mg O为 4.32 %～ 16 .0 5 %,Ir为 0 .0 6 %～ 0 .81%。总体来说 ,微玻璃陨石的化学成分变化较大 ,可能与靶岩的成分变化较大有关。始新世末期北美微玻璃陨石场的展布方向约为 2 5 0°,这与太平洋板块运动方向改变所需要的矢量变化(2 45°)仅相差 5°,推测很可能是始新世末期陨星的撞击引起了太平洋板块在该时期的运动方向由 NNW突然变为NWW。     

96孔酶标板法测定中国对虾血淋巴上清液抗菌活力和酚氧化酶活性的初步研究

用96孔酶标板法测量单尾中国对虾血淋巴上清液抗菌（Uα）应力和过氧化酶活性。实验表明，该法具有以下优点：1）可测定大批单尾对虾血淋巴上清液的抗菌活力，酚氧化酶活性；2）所需对虾血淋巴上清液微量化；3）用酶标仪读取酶的活性，减少了不同试验者人为读数时的误差；4）重复性高。     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

郯庐断裂带及其周缘中新生代盆地发育特征

郯庐断裂带作为中国东部滨太平洋地区一条巨型走滑构造带，对其周缘中、新生代盆地的发育、演化起着重要的控制作用。随着太平洋板块俯冲方向从NNW向NW到NWW的变化，郯庐断裂带的活动方式逐步从中生代左行走滑-左行斜向滑动过渡到早第三纪以左行斜向-倾向滑动，晚第三纪-第四纪转为倾滑-右行斜向滑动-右行走滑。走滑活动经历了一个循序渐进的周期演变过程。随着郯庐断裂活动方式的演变，其周缘中、新生代盆地的发育逐渐向北迁移，其中南段周缘盆地主要为中生代盆地，中段周缘盆地主要为中、新生代叠加盆地，中北段周缘盆地主要为早第三纪盆地。每个盆地都经历了拉分(伸展)裂陷到挤压反转的演化过程。此外，在同一时期、同一区域剪切应力场作用下，不同区段因其走向变化导致局部应力场变化，在增压弯曲部位发生会聚、挤压、隆升；而释压拉张部位发生离散、伸展、沉降，从而盆地发育。     

透空式水平板波浪上托力分布

通过系列模型试验，对波浪上托力沿板宽分布进行了详细分析，提出对于透空式平板结构，发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类，由此得到压强分布的计算公式。大量试验资料表明，该公式与实验值有着较好的一致性。     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

泥石流平面形态的统计分析

泥石流扇的平面形态可用规划的几何图形来模拟。在研究了中国西南地区小江流域和意大利东北部阿尔卑斯山区的５２个泥石流扇的基础上，本文提出了两种泥石流扇的平面形态：中国西南地区的“等腰三角形＋半圆形”泥石流扇和意大利东北部的“几何扇”。用统计分析建立了两组泥石流扇和泥石流流域之间的形态度量关系。通过两个研究区域的对比，两个流域参数：流域面积和主沟比降确定为影响泥石流扇平面形态和面积的最重要的因素。