阿尔金断裂早期走滑运动方向及其活动时间探讨

有关阿尔金断裂的地质问题长期存在争论,尤其是有关活动时间的观点最多,运动方向也有不同看法。本文阐述了阿尔金断裂的早期左旋走滑运动。在元古宙地层中产生的大型弧形构造,流变褶曲形态完整而清楚,同时镜下的显微构造观察和岩组分析,为进一步确定阿尔金断裂的早期左旋走滑运动提供了充分证据,其初始活动时间至少在８７０Ｍａ前,左旋走滑运动的确定对弄清阿尔金断裂的发展演化和矿产预测具有意义。     

边坡大变形弹塑性有限元分析[Ⅱ]

本文应用Ｕｐｄａｔｅｄ Ｌａｇｒａｎｇｉａｎ有限元分析理论,分析了石龙庙滑坡的稳定性,其中包括滑坡的大变形,初始应力和超孔隙水压力。根据土的工程地质性质,滑坡体分为四层,土层被视为是弹塑性的,土的塑性屈服采用Ｄｒｕｃｋｅｒ－Ｐｒａｇｅｒ理想塑性屈服准则,挡土墙建成前后的滑坡应力和变形被分别分析和讨论,最后根据这些分析结果,提出了滑坡的整治方案。     

Modeling RC column flexural failure modes under intensive seismic loading

The aim of this work is to model beam‐column behavior in a computationally effective manner, revealing reliably the overall response of reinforced concrete members subjected to intensive seismic loading. In this respect, plasticity and damage are considered in the predominant longitudinal direction, allowing for fiber finite element modeling, while in addition the effect of inelastic buckling of longitudinal rebars, which becomes essential at later stages of intensive cyclic loading, is incorporated. Α smooth plasticity‐damage model is developed for concrete, accounting for unilateral compressive and tensile behavior, nonlinear unloading and crack closure phenomena. This is used to address concrete core crushing and spalling, which triggers the inelastic buckling of longitudinal rebars. For this reason, a uniaxial local stress‐strain constitutive relation for steel rebars is developed, which is based on a combined nonlinear kinematic and isotropic hardening law. The proposed constitutive model is validated on the basis of existing experimental data and the formulation of the buckling model for a single rebar is developed. The cross section of rebar is discretized into fibers, each one following the derived stress‐strain uniaxial law. The buckling curve is determined analytically, while equilibrium is imposed at the deformed configuration. The proposed models for concrete and rebars are embedded into a properly adjusted fiber beam‐column element of reinforced concrete members and the proposed formulation is verified with existing experimental data under intensive cyclic loading.     

一种旋转塑性势面模型及非关联塑性流动法则

为了较好地描述软土塑性应变发展规律,提出了一种改进的塑性流动模型。该模型采用了与屈服函数形式相同,但具有一定倾角 的塑性势函数。土体在变形过程中,塑性流动方向会依赖于塑性势面的旋转而变化,直至达到破坏状态。通过对常规三轴试验结果的分析可以发现：在剪切过程中,塑性势面旋转角的初值 与终值 较为稳定,不受围压变化影响。在此试验观察基础上,引入了归一化的旋转角参数 以及描述土体应力状态的参数 ,在采用蛋形势函数的情况下二者具有良好的分段线性关系。利用该关系,建立了改进的塑性流动法则,只需要2个额外的模型参数。对所提出的塑性流动模型进行了验证,计算结果表明该模型能较好地反映塑性应变的变化趋势。     

铁路路基粗粒土填料临界动应力试验研究

粗粒土填料被广泛应用于铁路基床填料中,直接承受轨道结构传递的列车动循环荷载的长期作用,研究其在列车动荷载作用下的动力行为特征及塑性变形特性可为路基状态评估、沉降控制提供思路。采用GDS动三轴试验系统对铁路基床表层的粗粒土填料动力响应开展研究,通过引入塑性应变率和安定理论,将不同频率、围压、循环动应力比等条件下路基填料的轴向塑性应变的发展规律划分为塑性安定、塑性蠕变和增量塑性破坏3种类型,并确定了塑性安定和塑性蠕变状态的临界动应力水平。研究表明：粗粒土填料的临界循环应力比随着围压的增大而增大,随着荷载频率的增加而减小。通过对试验结果的拟合分析,提出了以围压为变量的临界动应力经验公式,为合理评估列车荷载作用下路基任意深度的动力稳定提供了理论依据。     

级配碎石填料大三轴试验及累积塑性应变预测模型

级配碎石作为重载铁路基床表层的主要填料,其受列车荷载的影响最大。因此,研究级配碎石在循环荷载作用下的动力行为及累积塑性应变演化特征变得尤为重要。首先,通过制备不同细粒含量的级配碎石填料,开展一系列大型动三轴试验,探究细粒含量、围压及动应力幅值对循环荷载作用下试样累积塑性应变的耦合影响机制。其次,基于塑性安定理论,确定不同应力水平下试样的动力行为,得到考虑围压及细粒含量参数的塑性蠕变状态临界动应力计算模型。最后,结合试验数据,建立考虑应力水平及细粒含量参数的塑性蠕变动力行为累积塑性应变预测模型,并明确各参数的物理意义。其研究成果可为既有重载铁路路基健康状态评估及考虑强度、变形综合控制的路基结构设计提供参考。     

基于岩体塑性位错理论的龙门山区域构造系统演化过程

青藏高原对四川盆地的挤压作用导致了龙门山断裂带的形成及其山脉的隆起。本文以龙门山附近区域板块运动以及深部岩体力学特性为背景,采用FLAC3D软件模拟再现了时间跨度为700万年的龙门山区域构造系统演化过程。研究结果表明：在板块运动作用下,F1、F2和F3断层依次形成,贯通的断层对地表的抬升具有较强的控制作用,当断层贯通于地表后,龙门山及其以西的川西高原持续隆起,平均抬升速率约为138mm/yr,而龙门山断裂带以东的川西坳陷只有较小的抬升量,从而导致川西高原抬升8996 m, 致使该区域产生6000m左右的落差,模拟的地形特征与目前的龙门山地形地貌基本相似。依据模拟结果与实测资料,绘制了龙门山断裂带形成及其附近区域地形地貌的演化过程图,呈现了板块挤压、断层塑性位错、地表侵蚀和沉积作用等因素共同作用对地形地貌的塑造过程。     

Torsional mechanisms in ductile building systems

It is postulated that in order to estimate torsional effects on the seismic response of ductile building structures, the associated plastic mechanism to be developed in the three-dimensional system should be identified. The proposed approach is very different from that embodied in building codes. Inelastic structures are classified as either torsionally unrestrained or restrained. It is shown that clearly defined mechanisms that are to be mobilized, enable the acceptable system ductility demand to be estimated. This should ensure that the corresponding demands imposed on critical translatory elements of the system do not exceed their established displacement ductility capacity. To this end familiar quantities, such as element yield displacement and stiffness, are redefined. Comparisons are made of the intents of existing codified design approaches and those emphasising the role of imposed inelastic displacements. A simple treatment of the consequences of earthquake-induced inelastic skew displacements is also addressed. The primary aim of the paper is to offer very simple concepts, based on easily identifiable plastic mechanisms, to be utilized in structural design rather than advancement in analyses. Detailed design applications of these concepts are described elsewhere. The approach is an extension of the deterministic philosophy of capacity design, now used in some countries. © 1998 John Wiley & Sons, Ltd.     

强震下混凝土剪力墙受弯模拟及测试实验研究

为提高混凝土剪力墙受弯性能计算的准确度,开展强震下混凝土剪力墙受弯性能试验研究。选取1个混凝土剪力墙对比试件和3个测试试件作为研究对象,对试件施加垂直荷载和水平荷载,模拟强烈地震作用力。试验前期准备工作完成后,建立分离式有限元模型,通过计算混凝土在受压和受拉状态下的损伤弹塑性刚度,完成对有限元模型中混凝土塑性损伤分析,在此基础上,计算混凝土剪力墙受弯承载力。利用有限元模型对3个测试试件进行模拟试验,结果表明,强烈地震后3个试件的荷载-位移曲线均与实际位移值接近,且混凝土剪力墙受弯承载力试验结果与实际值的误差在2%以内,表明试验研究方法具有一定的可行性,数值模拟结果较为准确。     

Is the Montreal Protocol a model that can help solve the global marine plastic debris problem?

The impacts of plastic debris on the marine environment have gained the attention of the global community. Although the plastic debris problem presents in the oceans, the failure to control land-based plastic waste is the primary cause of these marine environmental impacts. Plastics in the ocean are mainly a land policy issue, yet the regulation of marine plastic debris from land-based sources is a substantial gap within the international policy framework. Regulating different plastics at the final product level is difficult to implement. Instead, the Montreal Protocol may serve as a model to protect the global ocean common, by reducing the production of virgin material within the plastics industry and by regulating both the polymers and chemical additives as controlled substances at a global level. Similar to the Montreal Protocol, national production and consumption of this virgin content can be calculated, providing an opportunity for the introduction of phased targets to reduce and eliminate the agreed substances to be controlled. The international trade of feedstock materials that do not meet the agreed minimum standards can be restricted. The aim of such an agreement would be to encourage private investment in the collection, sorting and recycling of post-consumer material for reuse as feedstock, thereby contributing to the circular economy. The proposed model is not without its challenges, particularly when calculating costs and benefits, but is worthy of further consideration by the international community in the face of the global threats posed to the ocean by plastics.