Discussion on influence of cavern’s span on surrounding rock classification

The influence of cavern’s span on surrounding rock classification is getting more and more recognition along with large span underground working’s increasingly coming forth. The authors analyse the timbering expense of cavern in jointed rock mass, the radius of plastic loosened zone and the size effect of macroscopical mechanical parameters of rock mass. Based on the complexion of depressing of surrounding rock’s stability due to increment of cavern’s span, the authors pinpoint attaching importance to the influence of cavern’s span on surrounding rock classification; and suggest reckoning the factor of cavern’s span in surrounding rock classification scientifically by studying the size effect of rock mass’s physico-mechanical parameters.     

Plastic Deformation and Recrystallization of Garnet: A Mechanism to Facilitate Diffusion Creep

Elongate and deformed garnets from Glenelg, NW Scotland, occurwithin a thin shear zone transecting an eclogite body that hasundergone partial retrogression to amphibolite facies at circa700°C. Optical microscopy, back-scattered electron imaging,electron probe microanalysis and electron back-scatter diffractionreveal garnet sub-structures that are developed as a functionof strain. Subgrains with low-angle misorientation boundariesoccur at low strain and garnet orientations are dispersed, aroundrational crystallographic axes, across these boundaries. Towardshigh-strain areas, boundary misorientations increase and thereis a loss of crystallographic control on misorientations, whichtend towards random. In high-strain areas, a polygonal garnetmicrostructure is developed. The garnet orientations are randomlydispersed around the original single-crystal orientation. Somegarnet grains are elongate and Ca-rich garnet occurs on thefaces of elongate grains oriented normal to the foliation. Commonly,the garnet grains are admixed with matrix minerals, and, wherein contact with other phases, garnet is well faceted. We suggestthat individual garnet porphyroclasts record an evolution fromlow-strain conditions, where dislocation creep and recoveryaccommodated deformation, through increasing strain, where dynamicrecrystallization occurred by subgrain rotation, to higheststrains, where recrystallized grains were able to deform bydiffusion creep assisted grain boundary sliding with associatedrotations. KEY WORDS: diffusion creep; EBSD; garnet; plastic deformation; recrystallization     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.     

节理分布空间变异的地下洞室稳定性概率分析

以岩土材料力学参数空间变异性的"点估计-有限元"分析方法为基础,结合节理分析时自身存在几何模型、网格划分等特性,扩展了该方法在节理分布空间变异性分析方面的适用性,明确了具体的研究步骤与方法。以某抽水蓄能水电站为例,通过分析节理空间变异性对围岩变形与塑性区的影响,验证了扩展后该方法的准确性和合理性。对工程案例开挖揭露的1400余条节理进行概率统计,建立了节理空间变异性的有限元分析模型;采用扩展后的概率分析方法,研究了节理分布对地下洞室群围岩开挖稳定性的影响。研究结果表明:(1)对比概率分析得到的围岩变形概率分布与现场监测结果,发现剔除变形异常点后监测变形量值大部分位于得到的位移概率分布范围内,说明节理的空间变异性是导致监测变形波动的主要影响因素;(2)围岩变形概率分布的标准差能有效识别出围岩开挖变形受节理空间变异性的影响程度,对于所给出的案例依次为:机窝>边墙>顶拱;(3)围岩塑性区的概率分区能合理判断地下洞室群开挖时受节理影响较大的区域和范围,为工程施工的支护设计提供依据。     

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.     

塔里木盆地北缘兴地断裂构造变形特征

兴地断裂发生在中元古代末期，使中元古巨厚的沉积岩发生了强烈褶皱和隆起，并伴有大量岩浆侵入和区域变质作用。在兴地断裂形成的同时，发生了第一期构造变形，其特点以韧性变形为主，由三个变形幕构成，形成了本区主要构造骨架；晚元古代本区进入晋宁期发展阶段，团结的塔里木地台基底局部裂开，形成一系列近东西向的断陷盆地，发生了第二期变形，形成以塑性变形为主的板劈理和千枚理为其特征。该期变形结束了塔里木基底发展，进入了稳定盖层沉积发展阶段；进入早古生代，兴地断裂控制了该时期的沉积作用，之后发生第三期变形，以脆性变形为主，形成一系列碎裂岩和脆性变形组构，使兴地断裂形成几十米乃至上百米宽的破碎带，从而改造了早期的糜棱岩；至中、新生代，兴地断裂再次活动，形成断裂两侧南升北降的扭动形迹。通过对兴地断裂的深入探讨，笔者认为：该断裂具有线性特征明显，活动时间漫长，构造变形复杂，是塔里木盆地北缘规模巨大的复活大断裂。     

Energy demands for seismic design against low‐cycle fatigue

A seismic design procedure that does not take into account the maximum and cumulative plastic deformation demands that a structure is likely to undergo during severe ground motion could lead to unsatisfactory performance. In spite of this, current design procedures do not take into account explicitly the effect of low‐cycle fatigue. Based on the high correlation that exists between the strength reduction factor and the energy demand in earthquake‐resistant structures, simple procedures can be formulated to estimate the cumulative plastic deformation demands for design purposes. Several issues should be addressed during the use of plastic energy within a practical performance‐based seismic design methodology. Copyright © 2006 John Wiley & Sons, Ltd.     

Earthquake‐resistant structural design through energy demand and capacity

An energy‐based earthquake‐resistant structural design method is proposed. The proposed method uses specific input energy spectra, modal or time‐history analyses, and energy distribution among structural members. For a given member strength and stiffness, a relationship between the energy attributable to damage absorbed by a member and its cumulative ductility demand can be determined. Member strength, stiffness and energy capacity are design parameters which are simultaneously used in the design. The method can avoid soft‐storey design. The damage is measured based on a cumulative basis considering earthquake magnitude, frequency, and duration. Tests have been carried out to determine energy absorbing capacities of various structural components. More efforts are needed to make the energy‐based earthquake‐resistant structural design practical, but ssimple formulations for this method are possible. Copyright © 2007 John Wiley & Sons, Ltd.