Petrogenesis and deformation history of the lawsonite‐bearing blueschist facies metabasalts of the Diamante‐Terranova oceanic unit (southern Italy)

The Neotethyan oceanic Diamante‐Terranova unit (DIATU; southern Apennines–Calabria–Peloritani Terrane system) includes basic rocks that during the Cenozoic were subducted and metamorphosed to lawsonite‐blueschist facies conditions. Petrological and structural observations (both at the meso‐ and micro‐scale) show that lawsonite growth was continuous during three distinctive ductile deformation stages (D1–D3). These likely occurred close to the metamorphic peak, estimated at 350–390°C and 0.9–1.1 GPa, producing an equilibrium assemblage made of blue Na‐amphibole, lawsonite, chlorite and pumpellyite. Locally, pods dominated by quartz and epidote (plus chlorite, calcite and green Ca‐amphibole) developed at similar conditions (350–370°C, 0.8–0.9 GPa). Post‐peak evolution during the final exhumation of the DIATU along the subduction channel, also consisted of three deformation stages, defined by folding (D4) and normal faulting (D5) and finally by strike‐slip faulting (D6), affecting both the blueschist unit and the unconformably overlying Tortonian conglomerates. Vorticity analysis on syn‐tectonic lawsonite crystals indicates that severe flattening occurred during the D2 stage, with a significant secondary non‐coaxial strain component along the W–E plane. This is associated with an eastward tectonic vergence, consistent with the subsequent D3 and D4 folding stages characterized by a dominant ENE tectonic transport. It is suggested that exhumation started from the D2 stage and continued during D3 at similar HP/LT metamorphic conditions. The widespread occurrence of unreacted lawsonite crystals suggests that exhumation was very fast and supports the idea that concurrent ductile deformation might play a role in its preservation.     

天马和谢坊形变试验场地壳形变特征分析

本文对天马和谢坊试验场的三角和基线观测资料进行了应变分析,获得了该试验场的主应变值、主应变方向以及剪应变值。分析结果表明,该试验场的地壳形变特征基本上是由通过该场地的断层所制约,反映了该断层的性质。     

地震过程中地形变的Lyapunov指数变化

Lyapunov指数是判断动力学系统演化趋势的主要依据之一。本文根据Lyapunov指数的定义,导出了形变能到达临界状态时地壳中弹性模量与应变状态之间的关系,计算了青海门源6.4级地震过程中不同弹性模量所对应的Lyapunov指数,得出以下结论:(1)在Lyapunov指数稳定的意义下形变能的稳定性与应变张量ε和弹性矩阵D的乘积有关,当2ε~TD大于单位矩阵I时,形变能随应变的变化不稳定;当2ε~TD小于单位矩阵I时,形变能系统稳定。(2)在门源6.4级地震过程中,震后弹性地形变动力学系统的稳定性大于震前的稳定性。     

Centrifuge model tests on sand specimen under extensional load

The appearance of shear banding in granular materials has been investigated intensively during the last decades and is still of ongoing importance in terms of understanding the stress–strain behaviour of the material, the localization phenomena and the interaction between soil and structure. Only less attention has been paid to the occurrence of systems of shear bands although such systems can be identified in geotechnical structures as well as in geological formations. In this paper we present results of experiments on sand specimens under extensional load in natural gravity as well as in increased gravity in the centrifuge where the influence of the stress level on the geometry of a shear band pattern, specified by the spacing of the shear bands and the angle between failure surfaces and minor stress direction, has been investigated. X‐ray technique has been used to visualize the failure zones inside the specimen, an optical measurement system called Digital Image Correlation has been applied to identify and observe the appearing deformation mechanism on the sides of the specimens in natural gravity as well as during the flight in the centrifuge. It can be shown that the geometry of the shear band pattern is sparsely influenced by the change of the stress level. Copyright © 2004 John Wiley & Sons, Ltd.     

2018年云南地区GNSS面应变变化及地震关系分析

基于2018-01以来云南地区GNSS连续观测资料,利用高精度数据处理软件GAMIT/GLOBK处理后获取位移场并采用克里金插值方法进行网格化插值,获得均匀分布的位移场,再进行应变计算获取面应变信息,动态分析2018年云南地区面应变变化特征,探讨其与通海2次5.0级地震及墨江5.9级地震的内在联系。结果表明,2018-01~11云南地区面应变经历了拉张为主、区域应变快速积累、区域强挤压和强拉张并存(双柏-新平-墨江条带)、区域应变快速调整、震后应变格局改变(双柏-新平-墨江条带消失)的动态过程。通海2次5.0级地震和墨江5.9级地震分别发生在区域应变调整过程中以易门-塔甸为代表的强张拉和以景东-思茅为代表的强挤压高梯度带上,可能是在应变显著积累和应变调整双重因素作用下的产物,不同的是,墨江5.9级地震改变了以双柏-新平-墨江条带为界的强挤压和强拉张并存的区域特征,对云南整体区域面应变格局造成实质性的影响。     

温泉台体应变观测的影响因素及特征分析

为定量估计观测序列所包含的各种成分,评定台站的观测环境、观测质量及对地形变的监测能力,加深对观测数据的理解,准确识别震前异常,以温泉台体应变为例,选择体应变、辅助观测及气象三要素等观测数据,利用别尔采夫滤波、小波分析和相关性分析等方法,分析温泉台体应变观测各周期变化的影响因素及特征。结果表明：1）温泉台体应变年周期变化的影响因素可能为钻孔水位,体应变相位滞后水位约31 d;2）气压是温泉台体应变月波的主要影响因素;3）固体潮汐是温泉台体应变日波、半日波的主要影响因素;4）温泉台体应变与水位、气压、固体潮汐等具有较强的线性相关性。     

尼泊尔地区季节性水文负荷对地震活动性的调制作用

利用尼泊尔地区GPS时间序列季节性信号,构建区域季节性三维位移场和应力应变场模型,再结合降水和地震目录等数据,研究该地区季节性水文负荷对地震活动性的调制作用。结果表明：1）季节性地表位移与降水存在较强的时空相关性;2）季风期的降水对断层的长期运动趋势产生扰动,使库仑应力得到一定程度的释放,进而对地震活动产生抑制作用,并影响地震发生时间。     

钻孔应变观测原位标定方法研究进展

钻孔应变观测的原位标定是制约钻孔应变定量观测理论与技术发展的基础性问题。为推进钻孔应变观测在地球动力学研究中的应用,从标定模型、参考应变信号等方面系统总结钻孔应变观测原位标定方法研究的最新进展,指出钻孔应变观测原位标定中存在的主要问题,并展望今后的发展方向。     

管棚支护及注浆技术在-380石门过刘桥断层中的应用

刘桥断层位于刘桥一矿东北侧,落差110～210m,通过钻探揭露、物探探查、流量测井技术,对刘桥断层破碎带的富、导水性进行了研究,在-380石门巷道过刘桥断层前进行了管棚支护及预注浆加固工程,以及在巷道过刘桥断层过程中,采取了一系列行之有效的掘进支护措施,确保了-380石门巷道安全通过刘桥断层。     

长距离非开挖穿越技术在岩石层、砂层的施工实践

立沙油品储运项目输油管道东江穿越工程,管道穿越水平距离为1085m。穿越地层主要为不同风化程度的花岗岩及砂层等复杂地层,其中穿越最硬岩石单轴饱和抗压强度达到36．7MPa,采用大型非开挖水平定向钻机进行施工。简述了施工测量及确定方位角、钻导向孔、扩孔及管道回拖等主要施工过程。通过采用加设直径300mm导向套管、布置人工磁场等施工措施,有效地保证了穿越轨迹与设计曲线重合;存泥浆中添加堵漏剂等外加剂,防止泥浆从岩石裂隙巾流失;在施工至砂层时增加泥浆粘度及添加润滑剂等措施防止塌孔．同时减小扩孔及回拖阻力：采用开挖发送沟并在沟内灌水,使管道存孔内保持悬浮状态等措施以减少管道的摩擦阻力,确保管道顺利回拖。