四川省CORS网地壳运动速度场模型研究

使用GAMIT/GLOBK解算2006~2015年覆盖四川地区的50个CORS站的观测数据,并提取坐标时间序列,获得速度场模型。对四川省整体地壳运动以及区域应变场进行分析,结果表明,四川省CORS站水平方向平均速度为38.72 mm/a,速度场的优势方向为S73.9°E;欧亚框架下水平方向平均速度为14.40 mm/a,优势方向为S77.78°E,较ITRF2008框架下的速度降低了24.32 mm/a;垂直方向平均速度为3.43 mm/a,整体上表现为隆升状态,位于东部平原的少部分测站处于下降趋势,可能是由于城市建设、地下水或者煤矿、石油等自然资源的过度采伐导致;最大主应变率达到7.31×10-11/a,最小主应变率为-5.4×10-11/a,其中区域地壳面膨胀率高值区域集中在川西,低值区域和最大剪切应变率高值区域分布在三大断裂带附近。     

喷涂聚脲弹性体技术在海港码头预应力大管桩上的应用

针对北仑电厂预应力大管桩表面潮湿,需候潮作业,施工条件复杂,施工作业时间短的特点,从表面处理、参数的设定、喷涂施工、质量控制及验收和存在问题及解决方案等方面,介绍了喷涂聚脲弹性体技术在已建海港码头预应力大管桩表面防腐保护工程中的应用情况。可为类似结构物的设计、施工、维护及管理提供参考。     

福建省数字化钻孔体应变观测资料质量初步分析

对整个福建省的钻孔体应变仪器运行状况进行了综合评价,并对4个台站的观测资料质量进行了分析,用M2波潮汐因子及其相对中误差等来衡量其总体精度和稳定性,还分析了钻孔应变观测的干扰机理和特征,希望能够正确地认识以及排除观测资料中的非异常信息,提高观测精度,为地震分析预报提供可靠的前兆资料。     

四川盐源模范村喜马拉雅期斑岩铜矿床地质特征

文章通过野外地质观察,结合岩矿鉴定、化学分析、稳定同位素测定、稀土元素分析、成岩成矿同位素年龄测定、包裹体测温及成分等的研究,表明四川盐源模范村矿床具有典型斑岩铜矿的特征。成岩的多期次构成复式岩体,断裂构造控制的隐爆碎裂岩筒为成矿提供了通道和沉积场所。多期次成矿,特别是次生富集作用形成了中型规模的Ⅰ号矿体,影响次生富集带发育的F7断裂带起了重要作用。模范村矿床确系典型的斑岩铜矿,但又具独自的成矿特征。     

水平地震作用下无锚固储罐应力与应变响应分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的应力及应变反应进行了数值计算。对3×104m3和2×103m3罐壁应力及应变的分析结果表明:环向、轴向应力及应变的分布形式呈现出明显的下部大上部小的特点,在偏底部的位置出现应力和应变的峰值;储液罐在水平地震作用下“象足”变形是由纵向压应力达到屈曲临界应力导致的屈曲破坏,不是强度破坏,即破坏属于失稳破坏而非强度破坏。     

压实粉土非线性应力-应变关系的试验研究

对京九线路基粉土用GDS三轴仪进行固结不排水剪试验,研究不同围压、含水量、压实度下压实粉土样的应力-应变关系。结果表明:压实粉土在低围压下为应变软化,高围压下为应变硬化,存在一个屈服应力;含水量和压实度对粉土强度和应力-应变关系影响显著,随着含水量的减小、压实度的增大,压实粉土样强度增大,应力-应变曲线上升。对围压小于屈服应力的应变软化曲线,用常规的土的软化关系式进行拟和;对围压大于屈服应力的应变硬化曲线,用邓肯-张模型进行拟和;这二者的结合能描述压实粉土的应力-应变关系曲线,效果良好。     

Fluidized mixtures of magma and rock in a late Caledonian breccia dyke and associated breccia pipes in Appin,Scotland

This paper describes an unusual occurrence of igneous material as clasts in dyke and pipe breccias associated with late Caledonian minor intrusions. It is shown that the clasts were in a plastic condition when incorporated into the breccia rock. These igneous clasts were derived from magma disrupted at depth and then transported into the fluidized breccia columns where they were mixed with large numbers of clasts derived from the quartzite wall-rocks. Textures and planar fabrics developed during collapse of the fluidized system are described and shown to be separable from the later compaction associated with extensive pressure solution of the fine matrix. Most Caledonian breccia pipes lack igneous clasts and it is considered that this group of breccias represent the rarely-preserved boundary zone between active magma and breccia systems.     

Lateral dynamic response of a pipe pile in saturated soil layer

This paper presents an analytical solution for the lateral dynamic response of a pipe pile in a saturated soil layer. The wave propagations in the saturated soil and the pipe pile are simulated by Biot's three‐dimensional poroelastic theory and one‐dimensional elastic theory, respectively. The governing equations of soil are solved directly without introducing potential functions. The displacement response and dynamic impedances of the pipe pile are obtained based on the continuous conditions between the pipe pile and both the outer and inner soil. A comparison with an existing solution is performed to verify the proposed solution. Selected numerical results for the lateral dynamic responses and impedances of the pipe pile are presented to reveal the lateral vibration characteristics of the pile‐soil system. Copyright © 2015 John Wiley & Sons, Ltd.     

A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.