紫阳滑坡治理工程实例分析

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．     

Seal integrity and feasibility of CO<Subscript>2</Subscript> sequestration in the Teapot Dome EOR pilot: geomechanical site characterization

This paper reports a preliminary investigation of CO₂ sequestration and seal integrity at Teapot Dome oil field, Wyoming, USA, with the objective of predicting the potential risk of CO₂ leakage along reservoir-bounding faults. CO₂ injection into reservoirs creates anomalously high pore pressure at the top of the reservoir that could potentially hydraulically fracture the caprock or trigger slip on reservoir-bounding faults. The Tensleep Formation, a Pennsylvanian age eolian sandstone is evaluated as the target horizon for a pilot CO₂ EOR-carbon storage experiment, in a three-way closure trap against a bounding fault, termed the S1 fault. A preliminary geomechanical model of the Tensleep Formation has been developed to evaluate the potential for CO₂ injection inducing slip on the S1 fault and thus threatening seal integrity. Uncertainties in the stress tensor and fault geometry have been incorporated into the analysis using Monte Carlo simulation. The authors find that even the most pessimistic risk scenario would require ∼10 MPa of excess pressure to cause the S1 fault to reactivate and provide a potential leakage pathway. This would correspond to a CO₂ column height of ∼1,500 m, whereas the structural closure of the Tensleep Formation in the pilot injection area does not exceed 100 m. It is therefore apparent that CO₂ injection is not likely to compromise the S1 fault stability. Better constraint of the least principal stress is needed to establish a more reliable estimate of the maximum reservoir pressure required to hydrofracture the caprock.     

基于Poulos弹性理论的被动桩改进算法

传统的Poulos弹性理论仅适合于均质土中土体侧向位移时桩的性状分析,无法考虑土的层状特性。通过引入层状地基中作用一水平集中力的广义Mindlin解和地面作用有竖向荷载时的应力和位移通解,对Poulos方法进行了改进,使之扩展到多层土中,还用于研究堆载条件下的被动桩变形和受力响应。算例分析表明,改进弹性理论要比Poulos方法更为严密、合理,提高了计算精度,应用范围也更广。     

Efficiency analysis of open trench for impact pile driving through a single-variable method

Abstract

The ground vibrations during pile driving operation have a drastic potential to undermine the surrounding structures both in land and reclaimed land. Particularly, reclaimed land necessitates ample application of pile driving due to the weak land condition. To prevent the structural damage, attenuation of the ground vibrations to an allowable level through active isolation of circular open trench is the scope of this study. In this research, finite element simulations of continuous impact pile driving process from the ground surface was executed with particular attention to the pile-soil interaction, and thereby, the efficiency of open trench application in attenuation of the unsafe distance of different structures was surveyed using the vibration sensitivity degree. Regarding the crucial parameters of an open trench (depth, width, and location), it was concluded that a sufficient high depth can attenuate the unsafe distance up to 68%, the trench width variations are less effective, and an average pile-trench distance is the most efficient option. The excavation volume was also concluded as another crucial parameter in open trench design which takes all three parameters into account. The trench depth equal to the pile’s maximum critical depth of vibration was inferred for an optimum design.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

An Approach to Stability Analysis of Embedded Large-Diameter Cylinder Quay

The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation.     

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.     

港口靠船桩工作性状计算的双参数法

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析     

Stress Sharing Behavior and Its Mechanism during Consolidation Process in Composite Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio

In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay.