Reduction of sand demand for shore protection

Beach nourishment is an environmentally preferred method of shore protection, but the annual sand requirement may lead to substantial maintenance costs. The shoreline processes, involving the surf zone, beach and dune, are reviewed with the aim of reducing the annual sand requirement of eroding shorelines. It is shown that surf zones with equilibrium profiles, on which the wave energy conversion is evenly distributed across the surf zone, from experience for given conditions indicate least loss of sand. On steep, eroding shorelines it may be difficult to establish an equilibrium profile. For such cases, the use of perched surf zones is recommended, which are supported at the seaward limit by an underwater sill. For reduction of littoral transport, the use of pervious pile groynes is recommended. These are arguably more efficient than impervious groynes. The sand loss from a usually dry beach by raised water levels is shown to be a function of the beach slope and is least when the storm waves at raised water levels do not cut an erosion escarpment. The loss of sand from a dune by infrequent severe storm tides can be prevented with the aid of a built-in membrane. These sand losses are usually large and constitute an uneconomic use of this sand resource. The proposed concepts and measures are linked to existing knowledge, augmented by data from the large wave flume (LWF) in Germany and field data from the North and Baltic Sea coasts.     

Effects of Irregular Wave Groups on Pile Forces

The wave forces on 1, 2 and 4 vertical circular piles under the action of several wave trains of the same wave parameters, such as Hs,Tp and Mo, but different wave group factor GF are measured in the laboratory. After comparing these forces, it may be concluded that the mean and significant wave forces are almost of no difference for the wave trains with different GF. When GF is larger, the one-tenth of the wave froce extreme is slightly increased and the maximum wave force is much larger than the ones with smaller GF, to which attention must be paid in engineering practice.     

深层搅拌法在超软弱港口地基上的工程应用

某港口堆场地基上部5．0m系吹填而成，地表下18m范围均属软土，经真空预压初级加固后地基承载力仅在80—90kPa，局部区域上部淤泥土层土性指标较差，含水量大于50％，地基承载力不足60kPa。为了使地基达到230kPa的承载要求，设计采用深层搅拌法加固超软弱地基。通过现场成桩工艺试验和检测表明，桩身水泥土强度在90d龄期时大于1．80MPa，单桩承载力标准值大于150kN，以φ600桩径、桩长13．5m、置换率为0．308和φ500桩径、桩长13．5m、置换率为0．267两种方案布置的复合地基承载力标准值均超过了230kPa的设计要求。试验结果表明，深层搅拌法在港口超软弱地基土应用只要施工工艺适当，完全可以使地基承载力提高2—3．5倍以土，从而节省大量的工程投资。     

中伊朗盆地Garmsar区块Qom组沉积微相及储层特征研究

伊朗Garmsar区块Qom组形成于碳酸盐岩台地沉积环境,岩性以生物屑灰岩、含砂生物屑灰岩、泥晶灰岩为主,是典型的裂缝~孔隙型储层。利用区内野外实测剖面资料和露头岩样测试资料,对Qom组沉积相进行标识及类型划分,并对Qom组沉积微相及其平面展布特征进行分析,指出了该区域开阔台地相~高能红藻滩微相和局限台地相~泻湖夹台内滩微相是研究区储层发育的有利部位。F段中部的粒内溶孔较为发育,而溶缝主要出现在C1、C3亚段,整个Qom组构造微裂缝不甚发育。但储层孔渗条件比较差,属于中~低孔、低渗~特低渗储层,且存在严重的不均一性。为此,从沉积相与储层特征角度研究认为,中伊朗盆地Garmsar区块Qom组油气勘探存在一定的风险。     

济宁颜店铁矿地质特征及济宁岩群含矿性研究

伏于济宁滋阳山一带千米盖层之下的古元古代济宁岩群是一套低绿片岩相变质含铁岩系,主要岩石组合为千枚岩、板岩、磁铁石英岩等,其原岩为海相含灰质泥岩、砂岩类中酸性火山岩、硅铁岩等,该套岩系最大控制厚度达580m。其中赋存的条带状磁铁石英岩呈层状、似层状埋深在1612．89～1796．54m之间,共有5层铁矿,总厚度85．53m。估算预测的铁矿资源量（334）9．76亿t,mFe平均品位22．37％;低品位矿体预测的资源量（334）2．64亿t,mFe平均品位16．99％。     

南京某深基坑边坡支护设计与施工

南京某深基坑周边环境较为复杂,地下水丰富,基坑开挖较深,最深处达13m。根据周边环境的情况和开挖的深度,采用了钻孔灌注桩和土钉锚杆相结合的支护形式。分析了该基坑施工的技术要点,通过监测结果,说明该支护方案是可行的。     

基于粉喷桩复合地基沉降计算的探讨

在对粉喷桩复合地基现有的沉降计算理论分析的基础上,结合粉喷桩的荷载传递规律,提出符合工程实际的沉降计算方法。     

新鲜煤和氧化煤自燃倾向性的FTIR对比分析

利用傅立叶变换红外光谱（FTIR）分析技术,对乌达矿区低温氧化和新鲜煤样进行了红外光谱测试,通过两类煤样的特征官能团吸光度的对比分析．揭示了煤在氧化前后特征官能团的变化规律：氧化后的煤样中脂肪族和芳烃CH减少,酸酐C=O从无到有,芳烃骨架C=C基本不变,进而研究了其对煤自燃倾向性的影响。结果表明脂肪族和羟基含量越高,煤自燃倾向性越大。     

境外桩基工程的施工实践

通过对支援柬埔寨、几内亚桩基工程的施工实践,总结出在境外工程项目的管理中,要制定相应的管理制度与突发事件的应急预案,在施工过程中要注意政局变化,加强卫生疾病的防治,进行必要的物质储备和规避风险等注意事项及解决方法．对地勘单位拓展海外市场提出了建设性意见,具有一定的借鉴意义。     

广州航空邮件处理中心土洞及桩端软土层处理工艺研究

广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。