The simultaneous use of piles and prestressed anchors in foundation design

The paper presents a simplified design procedure to evaluate the loads in piles and prestressed anchors when simultaneously used in foundations under tension loads and high overturning moments. Although involving some necessary simplifications for the sake of design, the procedure keeps the main features of load transfer from piles and anchors to the surrounding soil. The approximate method has been adopted by the authors in relevant projects in Brazil, whose long term satisfactory performance indicates its appropriate performance. Two practical examples have been selected to illustrate the application of the proposed method. It is shown that anchor prestressing plays an important role in limiting tension loads on the piles and controlling foundation eccentricity. The importance of monitoring for replacement of occasional prestress losses to prevent long-term pile overstressing is illustrated.     

Modeling of Beams on Reinforced Granular Beds

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.     

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

基于有限差分法的抗滑桩计算机辅助设计

基于地基系数“m-m”法、“m-k”法、“k-k”法的原理,考虑桩顶和桩底边界条件以及桩在滑动面处位移、转角、弯矩和剪力的连续条件,可解得桩身各节点的位移和内力,提出了进行抗滑桩全桩内力计算的有限差分法。根据差分方程并用VB6.0编制了实用的计算程序,既可避免繁琐的查表计算,提高计算速度,又可提高计算精度,直观生动,真正实现了人机交互,在界面的引导下,设计人员可完成全部计算,并绘出内力图形和抗滑桩截面配筋图,使设计更方便快捷,该软件可以极大地提高生产效率,降低工程造价,从而实现抗滑桩的优化设计。最后采用上述方法对某滑坡的悬臂抗滑桩进行了设计与计算。     

考虑滑脱效应和温度场的煤层气渗流数值模拟

由于煤层气的解吸热效应,煤层气的运移过程是一个非等温过程。因此,温度场对煤层气渗流有着重要的影响。前人在研究煤层气渗流规律的研究中并没有同时考虑滑脱效应和温度场因素的影响,而在实际的深部开采中综合考虑滑脱效应和温度场的影响对研究深部煤层气运移规律有着重要的意义。因此本文建立了考虑滑脱效应及温度场的煤层气渗流数学模型,利用有限元数值方法研究了考虑滑脱效应和温度场耦合的煤层气运移规律;研究了考虑滑脱效应和温度场对压力场分布的影响;对考虑滑脱效应及温度场因素的煤层气产量进行了预测。得出了随着温度的升高煤储层的压力在降低,温度的升高对煤层气的产量有着负面的影响这一重要结论。     

新近沉积粉细砂层地基的试验与评价

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

低阻油气储层测井解释方法研究

对低阻油气储层的测井响应特征和储层物性特征进行了研究,并针对研究区域低阻储层的特点,以岩心与测井数据的相关性为依据,提出了适合地区特点的储层参数解释方法。通过应用三水导电模型,提高了低阻储层的测井解释精度。     

非等截面桩超声波成孔质量检测

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。     

土屋铜矿上方覆盖层元素分布规律研究

通过对土屋铜矿上方覆盖层不同层位样品进行分析发现，成矿元素Cu在覆盖层底部靠近基岩的原地风化残积层和地表弱胶结层中富集，而在地衰弱胶结层中又倾向于向两“极”富集，即在最粗粒级和最细粒级含量较高．考虑到采样效率和成本等综合因素，在区域调查中，以采集弱胶结层（5～40cm）、细粒级样品（-160目）为最佳采样介质．