Rock physics model of tight oil siltstone for seismic prediction of brittleness

Tight oil siltstones are rocks with complex structure at pore scale and are characterized by low porosity and low permeability at macroscale. The production of tight oil siltstone reservoirs can be increased by hydraulic fracturing. For optimal fracking results, it is desirable to map the ability to fracture based on seismic data prior to fracturing. Brittleness is currently thought to be a key parameter for evaluating the ability to fracture. To link seismic information to the brittleness distribution, a rock physics model is required. Currently, there exists no commonly accepted rock physics model for tight oil siltstones. Based on the observed correlation between porosity and mineral composition and known microstructure of tight oil siltstone in Daqing oilfield of Songliao basin, we develop a rock physics model by combining the Voigt–Reuss–Hill average, self-consistent approximation and differential effective medium theory. This rock physics model allows us to explore the dependence of the brittleness on porosity, mineral composition, microcrack volume fraction and microcrack aspect ratio. The results show that, as quartz content increases and feldspar content decreases, Young's modulus tends to increase and Poisson ratio decreases. This is taken as a signature of higher brittleness. Using well log data and seismic inversion results, we demonstrate the versatility of the rock physics template for brittleness prediction.     

Rock physics modelling and inversion for saturation-pressure changes in time-lapse seismic studies

Time-lapse seismic data are generally used to monitor the changes in dynamic reservoir properties such as fluid saturation and pore or effective pressure. Changes in saturation and pressure due to hydrocarbon production usually cause changes in the seismic velocities and as a consequence changes in seismic amplitudes and travel times. This work proposes a new rock physics model to describe the relation between saturation-pressure changes and seismic changes and a probabilistic workflow to quantify the changes in saturation and pressure from time-lapse seismic changes. In the first part of this work, we propose a new quadratic approximation of the rock physics model. The novelty of the proposed formulation is that the coefficients of the model parameters (i.e. the saturation-pressure changes) are functions of the porosity, initial saturation and initial pressure. The improvements in the results of the forward model are shown through some illustrative examples. In the second part of the work, we present a Bayesian inversion approach for saturation-pressure 4D inversion in which we adopt the new formulation of the rock physics approximation. The inversion results are validated using synthetic pseudo-logs and a 3D reservoir model for CO₂ sequestration.     

Rock elasticity as a function of the uniaxial stress: laboratory measurements and theoretical modelling of vertical transversely isotropic and orthorhombic shales

We apply a rock-physics model that describes the relationship between the effective stress and rock elasticity. We experimentally obtain and analyse a data set containing one vertical transversely isotropic and one orthorhombic shale sample. The vertical transversely isotropic symmetry of the first sample is caused by the layered structure of the rock. The seismic orthorhombicity of the second sample could be explained after microscopic analysis of thin section, which demonstrates an imperfect disorder of inhomogeneities. Both samples were loaded uniaxially in a quasi-static regime. During the loading, we measured stress-dependent seismic velocities and sample deformations. For the analysis of the stress-dependent velocities and stiffnesses, we modelled the measured data set using a recent generalization of the porosity deformation approach. Comparison of the experimentally determined and numerically modelled data supports the applicability of the theory and helps in the interpretation of experimentally obtained data. In agreement with the theory, uniaxial stress increases the elliptic component of the seismic anisotropy and does not impact the anellipticity parameter. We demonstrate the distinct influence of the stiff and compliant porosities on the stress sensitivity of the elastic properties.     

Water retention effects on elastic properties of Opalinus shale

Shales play an important role in many engineering applications such as nuclear waste, CO₂ storage and oil or gas production. Shales are often utilized as an impermeable seal or an unconventional reservoir. For both situations, shales are often studied using seismic waves. Elastic properties of shales strongly depend on their hydration, which can lead to substantial structural changes. Thus, in order to explore shaly formations with seismic methods, it is necessary to understand the dependency of shale elastic properties on variations in hydration. In this work, we investigate structural changes in Opalinus shale at different hydration states using laboratory measurements and X-ray micro-computed tomography. We show that the shale swells with hydration and shrinks with drying with no visible damage. The pore space of the shale deforms, exhibiting a reduction in the total porosity with drying and an increase in the total porosity with hydration. We study the elastic properties of the shale at different hydration states using ultrasonic velocities measurements. The elastic moduli of the shale show substantial changes with variations in hydration, which cannot be explained with a single driving mechanism. We suggest that changes of the elastic moduli with variations in hydration are driven by multiple competing factors: (1) variations in total porosity, (2) substitution of pore-filling fluid, (3) change in stiffness of contacts between clay particles and (4) chemical hardening/softening of clay particles. We qualitatively and quantitatively analyse and discuss the influence of each of these factors on the elastic moduli. We conclude that depending on the microstructure and composition of a particular shale, some of the factors dominate over the others, resulting in different dependencies of the elastic moduli on hydration.     

Static and dynamic stiffness measurements with Opalinus Clay

In this work, an experimental study was carried out with the aim of reconciling static and dynamic stiffness of Opalinus Clay. The static and dynamic stiffness of core plugs from a shaly and a sandy facies of Opalinus Clay were characterized at two different stress states. The measurements included undrained quasi-static loading–unloading cycles from which the static stiffness was derived, dynamic stiffness measurement at seismic frequencies (0.5–150 Hz) and ultrasonic velocity measurements (500 kHz) probing the dynamic stiffness at ultrasonic frequencies. The experiments were carried out in a special triaxial low-frequency cell. The obtained results demonstrate that the difference between static and dynamic stiffness is due to both dispersion and non-elastic effects: Both sandy and shaly facies of Opalinus Clay exhibit large dispersion, that is, a large frequency dependence of dynamic stiffness and acoustic velocities. Especially dynamic Young's moduli exhibit very high dispersion; between seismic and ultrasonic frequencies they may change by more than a factor 2. P-wave velocities perpendicular to bedding are by more than 200 m/s higher at ultrasonic frequencies than at seismic frequencies. The static undrained stiffness of both sandy and shaly facies is strongly influenced by non-elastic effects, resulting in significant softening during both loading and unloading with increasing stress amplitude. The zero-stress extrapolated static undrained stiffness, however, reflects the purely elastic response and agrees well with the dynamic stiffness at seismic frequency.     

Estimating gas saturation in a thin layer by using frequency‐dependent amplitude versus offset modelling

Various models have been proposed to link partial gas saturation to seismic attenuation and dispersion, suggesting that the reflection coefficient should be frequency‐dependent in many cases of practical importance. Previous approaches to studying this phenomenon typically have been limited to single‐interface models. Here, we propose a modelling technique that allows us to incorporate frequency‐dependent reflectivity into convolutional modelling. With this modelling framework, seismic data can be synthesised from well logs of velocity, density, porosity, and water saturation. This forward modelling could act as a basis for inversion schemes aimed at recovering gas saturation variations with depth. We present a Bayesian inversion scheme for a simple thin‐layer case and a particular rock physics model and show that, although the method is very sensitive to prior information and constraints, both gas saturation and layer thickness theoretically can be estimated in the case of interfering reflections.     

Effective stresses and shear failure pressure from in situ Biot's coefficient,Hejre Field,North Sea

We propose a combination of Biot's equations for effective stress and the expression for shear failure in a rock to obtain an expression for minimum pore pressure in a stable vertical well bore. We show that a Biot's coefficient calculated from logging data in the Hejre Field, North Sea, is significantly different from 1. The log‐derived Biot's coefficient is above 0.8 in the Shetland Chalk Group and in the Tyne Group, and 0.6–0.8 in the Heno Sandstone Formation. We show that the effective vertical and horizontal stresses obtained using the log‐derived Biot's coefficient result in a drilling window for a vertical well larger than if approximating Biot's coefficient by 1. The estimation of the Biot's coefficient is straightforward in formations with a stiff frame, whereas in formations such as shales, caution has to be taken. We discuss the consequence of assumptions made on the mineral composition of shales as unphysical results could be obtained when choosing inappropriate mineral moduli.     

岩石物理驱动的储层裂缝参数与物性参数概率地震反演方法

长波长假设条件下,各向同性背景地层中发育一组平行排列的垂直裂缝可等效为具有水平对称轴的横向各向同性（HTI）介质.基于不同观测方位的岩石地震响应特征变化,宽方位地震数据不仅可实现裂缝岩石弹性参数与各向异性参数的预测,同时也蕴含着丰富的孔隙度等储层物性参数信息.本文结合实际地震资料提出了贝叶斯框架下岩石物理驱动的储层裂缝参数与物性参数概率地震联合反演方法,首先基于AVAZ反演裂缝岩石的弹性参数与各向异性参数,并在此基础上通过统计岩石物理模型表征孔隙度、裂缝密度等各向异性介质储层参数与裂缝岩石参数的相互关联,并采用马尔科夫链蒙特卡洛（MCMC）抽样方法进行大量样本的随机模拟,使用期望最大化（EM）算法估计后验条件概率分布,最终寻找最大后验条件概率对应的孔隙度、裂缝密度等HTI裂缝介质储层参数即为反演结果.测井及实际地震数据处理表明,该方法能够稳定合理地从方位地震资料中获取裂缝岩石弹性参数与各向异性参数,并提供了一种较为可靠的孔隙度、裂缝密度等裂缝介质储层参数概率地震反演方法.     

基于贝叶斯线性AVAZ的TTI介质裂缝参数反演

裂缝储层岩石物理参数的准确获得对地下裂缝预测具有重要意义,而叠前方位AVA地震反演是获得裂缝岩石物理参数的有效手段.假设地下岩石为倾斜横向各向同性（TTI）介质,本文从裂缝岩石物理等效模型的构建出发,从测井数据中估计出纵横波相对反射系数和裂缝柔度参数.通过推导含裂缝柔度的方位各向异性反射系数公式,基于贝叶斯反演框架建立了P波线性AVAZ反演方法.合成地震数据应用表明基于贝叶斯理论的TTI介质裂缝柔度反演方法具有一定抗噪性,可以降低裂缝柔度估测的不确定性,为地下裂缝预测提供有力的依据.     

基于统计岩石物理模型的各向异性页岩储层参数反演

提出了各向异性页岩储层统计岩石物理反演方法.通过统计岩石物理模型建立储层物性参数与弹性参数的定量关系,使用测井数据及井中岩石物理反演结果作为先验信息,将地震阻抗数据定量解释为储层物性参数、各向异性参数的空间分布.反演过程在贝叶斯框架下求得储层参数的后验概率密度函数,并从中得到参数的最优估计值及其不确定性的定量描述.在此过程中综合考虑了岩石物理模型对复杂地下介质的描述偏差和地震数据中噪声对反演不确定性的影响.在求取最大后验概率过程中使用模拟退火优化粒子群算法以提高收敛速度和计算准确性.将统计岩石物理技术应用于龙马溪组页岩气储层,得到储层泥质含量、压实指数、孔隙度、裂缝密度等物性,以及各向异性参数的空间分布及相应的不确定性估计,为页岩气储层的定量描述提供依据.