A Simplified Analytical Procedure for the Determination of Organically Bound Halogens in Salt‐containing Water Samples

A method was developed for the determination of organic halogens in water samples with the aim of minimizing matrix effects and simplifying the sample preparation technique commonly used. The method is based on the adsorption of organic halogens in modified hydrophilic divinylbenzene polymer columns and their elution with methanol. The adsorbent used enables rapid adsorption and desorption due to comparatively high operating flow rates and minimized solvent amounts. Furthermore, no additional reconcentration steps are needed. The methanol extract obtained is combusted with a standard EOX (extractable organic halogen) analyzer and the concentration of organically bound halogens is determined by microcoulometric analysis. The matrix effects are considerably reduced compared to the standard procedure (EN 1485) commonly used. A detection limit of 13 μg/L was established.     

Measuring the k–S–p relations on DNAPLs migration

Migration characteristics of dense non-aqueous phase liquids (DNAPLs) in the subsurface can be expressed as a water–DNAPL two-phase system based on mainly the k–S–p relations, which describe the relations among relative permeability (k), degree of water saturation (S), and capillary pressure head (p). The aims of this research are to develop an experimental system with new type of probes, such as the electrical conductivity probe for measuring the degree of water saturation and the hydrophilic and hydrophobic tensiometer for measuring the pore water and DNAPL pressures, and also to estimate the results obtained from the developed experimental system. From these tests, the excellent k–S–p relations were obtained and the efficiency and validity of this developed experimental system have been confirmed in terms of the concept of the scaling coefficient calculated by interfacial tensions.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.     

A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.     

Global thermal and dynamical perturbations due to Cretaceous mantle avalanche

The numerical models of mantle convection agree to depict avalanches behaviour according to the level of endothermicity of the spinel → perovskite phase change. Their potential effects on the global thermal and dynamical states of the mantle have been computed thanks to a numerical code, which takes into account both the 400-km exothermic and the 660-km endothermic phase changes. The cycle followed by the avalanches is: local layering, destabilization of the 660-km thermal layer, travelling and spreading on the core, and reappearing of the local layering. Therefore, mantle convection is characterized by quiet periods of partial layering embedded in catastrophic events. During the avalanche, the amplitude of the surface velocity is multiplied by two, which would imply an enhanced plate tectonic and ridge activities. The global thermal effects of the avalanche are compatible with a high mantle temperature and an acceleration of Earth's rotation during the Cretaceous. They also offer a coherent explanation to locate the origin of mantle plumes both within the CMB and just below the transition zone.     

对地观测小卫星的相位噪声分析与控制

结合传输型对地观测小卫星一体化设计的特点，介绍了一种用于对地观测小卫星系统的锁相接收机的-构成及原理，并对系统的相位噪声性能进行了详尽的分析，提出了对其相位噪声进行技术控制的方法。通过文中的分析与研究，消除了由于对地观测小卫星相位噪声所引起的系统误码率的恶化，提高了系统的可靠性，为下一步对地观测小卫星的发展与应用打下了良好的技术基础。     

GPS载波相位三差观测方程的改化

本文根据相关测量平差原理推导出改化ＧＰＳ载波相位三差观测方程的算法，使改化后的协因数呈分块对角体。这种改化算法不但顾及观测值的相关性，而且节省大量的存储单元。使采用严密平差法平差三差观测值成为一种最简单的数据处理方法之一。     

论光电测距仪的周期误差和相位不均匀性误差

论述了测距仪周期误差及相位不均匀性误差的性质，分析了这些误差对距离测量的影响，给出了实验结果，提出了改进有关误差检定的建议     

榴辉岩中铁铝榴石的测定方法研究

对国内主要矿区铁铝石榴子石纯矿物中铁的价态规律进行了研究。证明其所含Ｆｅ均以Ｆｅ＾２＋为主，其质量分数在８３－９４，并将Ｆｅ＾２＋这特征性成分用于某地榴辉岩中铁铝榴石的间接测定，获得结果与焙烧磁化－磁选法一致且精度好，较磁化法简便，快速。     

氢化物分离一化学发光法测定痕量锑

采用Luminol－H。O。Air（巨）化学发光反应体系作为分析检测方法，建立了一个测定地质样品中痕量锑的化学发光分析法。方法的原理是用AgNO。吸收由样品发生的氢化锑气体，使吸收液中生成Sb（巨）与过量的K。Cr。O，反应生成Cr（1），方法的检出限为0．6us／mlSb，工作曲线的线性范围是2～1000ng／mlSb，测定的相对标准偏差小于5％。本方法已用于地质样品中痕量佛的测定。