单频GPS整周模糊度动态快速求解的研究

提出了一种动态快速求解整周模糊度的方法,即先对系数阵进行QR分解,然后通过矩阵变换使模糊度参数和位置参数分离,从而降低矩阵的维数,满足实时动态求解的要求,最后应用LAMBDA方法搜索模糊度。为验证该算法,用单频GPS接收机进行了静态定位和动态定位两种试验。结果表明,静态定位误差小于1cm,动态定位误差小于3cm。由此可见,该方法能够为动态用户快速而精确地实施GPS单频动态定位。     

论江西省大气成分观测与服务系统建设

在介绍国内外大气成分观测与研究进展的基础上，对建设江西省大气成分观测与服务系统的必要性和可行性进行了科学的分析，并从系统建设的原则、目标、内容、技术路线、监测方案，以及系统研究的主要内容和提供的产品等方面，对拟建的江西省大气成分观测与服务系统进行了全面的阐述。研究结果认为，随着江西经济建设的快速发展，建设江西省大气成分观测与服务系统，有利于了解和掌握江西大气物质成分分布特征及变化情况；有利于提高江西天气气候预报预测准确率，提升江西气象公共服务的能力和水平；可为预防大气化学灾害和控制区域大气环境质量，提供科学的决策依据，具有显著的社会、经济效益和生态效益。     

Evolution of the fogwater composition in Strasbourg (France) from 1990 to 1999

The chemical composition of fogwater has been studied in the city of Strasbourg (France) from 1990 to 1999. During these years, fogwater samples have been collected and analysed for major ions and trace metals. This paper reports on the analysis of the collected dataset. The analysis revealed a significant decrease in acidity of approximately one pH unit over the course of the study. This decrease in acidity appears to be linked to a decrease in SO_2(g) and the resulting SO₄²⁻. Trace metal concentrations have also strongly decreased over the 10-year period. Pb concentrations, following the elimination of leaded gasoline, decreased by more than one order of magnitude.     

工程场地的特征与工程地质分区

工程场地与城市在空间尺度上相去甚远 ,但工程场地所具备的与环境行为相近的共性 ,使其属性分析可以推广应用到城市建设所面对的整个工程地质环境。从这一意义上说 ,工程场地是整个城市宏观工程地质环境的微观单元 ,众多微观单元的组合构成了环境的宏观总体。为此 ,工程场地的三大属性特性、适宜性、稳定性 ,可以作为城市工程地质环境分析中分析方法的基础。从工程场地分析推广到城市工程地质环境分析 ,还将有助于保证城市工程地质环境分析的定量化水平。     

原油在储层介质中的加水裂解生气模拟实验

采用高温高压热模拟实验方法,开展了原油在砂岩和火成岩储层介质中的加水裂解生气模拟实验研究.结果表明,原油开始大量裂解的温度是400℃,随模拟温度增加,甲烷相对含量增大,乙烷以上重烃气尤其是丙烷相对含量减小.其中砂岩的油水混合物裂解生气主要发生在450～500℃之间,生气窗范围小,对应的烃气产率高,火成岩的油水混合物裂解生气主要发生在450～600℃之间,生气窗范围大,对应的烃气产率小.模拟烃气的组分碳同位素分馏显著,随模拟温度增加呈变重趋势.在裂解生气过程中,水解加氢和催化作用对烃气的组成、产率和碳同位素分布有重要影响。     

裂隙型单斜介质中弹性系数的计算及波的传播特性研究

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。     

An automated strategy for calculation of phase diagram sections and retrieval of rock properties as a function of physical conditions

We formulate an algorithm for the calculation of stable phase relations of a system with constrained bulk composition as a function of its environmental variables. The basis of this algorithm is the approximate representation of the free energy composition surfaces of solution phases by inscribed polyhedra. This representation leads to discretization of high variance phase fields into a continuous mesh of smaller polygonal fields within which the composition and physical properties of the phases are uniquely determined. The resulting phase diagram sections are useful for understanding the phase relations of complex metamorphic systems and for applications in which it is necessary to establish the variations in rock properties such as density, seismic velocities and volatile‐content through a metamorphic cycle. The algorithm has been implemented within a computer program that is general with respect to both the choice of variables and the number of components and phases possible in a system, and is independent of the structure of the equations of state used to describe the phases of the system.     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.