金矿测年方法讨论及定年中存在的问题

准确的成岩成矿年代测定是矿床研究和对比的基础。然而近几年来 ,不同的研究者对同一矿床采用不同的定年方法得出了相差十分悬殊的成岩成矿年龄的报道屡见不鲜。为此笔者在分析了不同定年方法适用性的同时 ,强调了在金矿定年中要加强对金矿成岩成矿地质背景的研究 ,重视不同地质体与成矿的先后关系 ,确定标志性地质体 ,选择合适的定年方法 ,测定标志性地质体和矿体的成岩成矿年代 ,使成岩成矿年代互为限定 ,得到高质量的年代学数据。     

油气差异泵吸作用机理探讨——以泌阳凹陷为例

通过对泌阳凹陷油气成藏过程的系统研究,发现在差异抬升过程中,深凹源岩区抬升幅度小,凹陷四周圈闭发育区抬升幅度大,差异抬升运动导致源岩和圈闭之间的势能差急剧增大,从而促使油气大规模沿砂体向圈闭充注,这一过程类似于水泵抽水的过程,据此,文中提出了油气泵吸作用和油气差异泵吸作用的概念及机理,并以泌阳凹陷为例讨论了油气差异泵吸作用的形成条件、主要影响因素及油气差异泵吸作用对油气差异分布的控制作用。研究表明:影响油气差异泵吸作用的因素主要有势能梯度、通道质量和泵源配置及油气运移距离;泌阳凹陷油气分布总体上受成藏运聚系统的控制,在各运聚系统内油气分布受油气差异泵吸作用的控制,其中势能梯度、泵源配置及油气运移距离是影响油气差异分布的主要因素,而在每一个大泵(复合泵)内部,通道质量差异是影响油气差异分布的主要因素。     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

沉积盆地异常低压与低压油气藏成藏机理综述

地下异常低压主要有两种成因：抬升—剥蚀反弹和在介质孔隙度、渗透率非均质性条件下的区域地下水稳态流动，而化学渗透与流体“冷却”在低压形成中只起次要作用。根据圈闭类型、储盖组合及成藏过程，将低压油气藏分为三种类型：①常规地层型(除砂岩透镜体外)低压油气藏，低渗透岩石通常起遮挡作用，底水与边水不发育；②砂岩透镜体低压油气藏，通常分布于盆地中心的深部，具有不含水、充满油气的特点，油气的充注和水的排出与构造抬升之前压实作用、超压引起的水驱裂缝和毛细管力的作用有关，抬升—剥蚀引起的异常低压导致水由砂岩向页岩的流动有助于油气藏中水的排出；③深盆区低渗透储层低压气藏，通常分布在含水层的下倾方向(气水倒置)，异常低压是由于构造抬升致使超压向低压演化的结果。实例研究表明，构造抬升盆地中的低压系统是一个水动力相对封闭的体系，有利于油气的聚集与保存。     

高密度电法勘探在岩溶查找中的应用

介绍了武汉市汤逊湖污水处理厂厂址的地质概况和地球物理特征，以及高密度电法勘探的施工方案，分析了视电阻率异常特征，并说明了其异常验证情况。高密度电法勘探结果表明该区存在溶洞，为施工提供了决策依据，建议在有溶洞的地段采取相应措施，以防止工程建设后发生地质灾害。     

论层序地层学与含油气系统在油气勘探中的联系——以鄂尔多斯中生代盆地为例

虽然层序地层学与含油气系统理论的各自研究对象和研究方法不同，但由于层序地层学研究对象(沉积岩)是含油气系统研究对象(油气)的载体，二者可以由含油气盆地分析有机的结合起来。层序地层分析包含了对含油气系统的地质要素及成藏作用载体的分析，因而沉积层序的组成单元与含油气系统的地质要素有必然的联系：在一个沉积盆地的数个沉积层序中，成熟烃源岩往往是地史中具一定埋深、分布广、厚度大、有机质含量高的凝缩层，这个凝缩层往往是一个构造超层序的最大海(湖)泛面；储集岩往往是成熟烃源岩之上层序的低水位体系域或紧邻成熟烃源岩的高水位体系域；有效盖层为储集岩之上层序的水进体系域及凝缩层；成熟烃源岩之上的沉积层序为上覆岩层；低水位体系域储集岩有可能沿上倾方向尖灭，被层序界面及其上层序的水进体系域岩性圈闭；除构造裂缝外，低水位体系域下切谷可作为油气向上运移通道；一个含油气系统往往跨越不同的沉积层序甚至构造超层序。     

The role of sediment specific gravity and availability on cluster evolution

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.     

Paléoenvironnements et caractérisation des roches mères pétrolières des séries pré-salifères du bassin intérieur du Gabon

The Interior Basin of Gabon, created during the break-up between South America and Africa, displays thick Neoproterozoic to Aptian p.p. fluvio-lacustrine deposits overlain by Aptian to Albian marine facies. Rock–Eval analyses from outcrop and drillhole samples show high content in organic matter (up to 25%) related to types I and II. These intervals are encountered within Permian, Neocomian–Barremian as well as Aptian siliciclastic succession. They constitute fairly good to excellent potential petroleum source rocks, which are most probably at the origin of oil indices recognized both in drillholes and in surface.     

小浪底工程岩体力学参数研究

本文系统研究了小浪底工程的岩体的强度特征,采用了室内试验,野外结构面统计,工程地质类比法、模型试验法和Hoek Brown的经验法,估算了工程岩体的力学指标,指出了上述各种方法中所存在的不足,认为在工程实践中,应尽可能使用多种估计方法,交叉校核所得参数,以提高参数的可靠性,保证工程的安全,节约投资。     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003