浅层物探技术在近海灾害地质与工程地质调查中的应用

随着海洋资源的开发与滨岸工程的建设,越来越多地遇到海洋地质灾害的影响与危害。为了避免并降低海洋地质灾害的影响程度,应开展海洋灾害地质与工程地质调查。二十多年来的实践经验表明,若采用以高分辨率地震为主,配合浅地层剖面、旁侧声纳、测深及磁力测量等综合浅层物探技术,对于了解海洋地质灾害因素与海底浅部工程地质特性等方面都能取得良好的效果,这是一种既经济又较快速地提供成果资料的好方法。     

钱塘江强潮河段江道缩窄治理研究

对钱塘江强潮河段江道缩窄治理进行研究。首先,回顾治理方案的比选,江道全线缩窄时河轴线线路和河道宽度的确定原则,以及不同河段的指数放宽率。然后,介绍了在涌潮汹涌、滩涂淤坍变化剧烈的强潮河段,实施筑堤所采取的工程措施的步序与要点。最后,分析论证了大规模江道缩窄治理后河床、潮汐、洪水位及涌潮高度等特征值的变化。可供进一步深入理论研究和工程施工参考运用。     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

海洋动床物理模型试验地形制作技术

试验模型地形制作是物模试验的一个基本工作,模型制作的好坏直接关系到实验的精度.模型试验之前,需要根据相似理论,选取合适的材料,按照一定的几何比尺进行模型的制作.通过2个具体工程作为实例说明了模型制作的过程、制作的技术性问题和制作经验.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.     

长江三角洲北翼全新统底界和“硬粘土层”的讨论

本文以钻孔资料为依据,通过岩石地层学、生物地层学和~(14)C测年分析,认为应以第一海相层底板作为Q_4/Q_(1-3)界线,而不能机械地划在“硬粘土层”顶板;上更新统顶部属河漫、湖沼相沉积,后经暴露、脱水局部层段硬化而成为所谓的杂色“硬粘土层”;本区晚更新世末古地形呈由东、东南向西、西北逐渐抬升的掀斜状,并控制着全新世的海侵方向和范围。     

多极子声波测井在低孔低渗气层中的数值研究

现有的天然气勘探中的测井技术,在评价低孔低渗气层时遇到诸多难题,本文引入了一种新的气藏评价方法,即利用多极源激发的模式波的幅度来识别气藏,并对此方法进行了数值验证.以Biot多孔介质理论为基础建立了低孔低渗含气储层计算模型,数值计算了多极子声源在充液井孔中激发的频散曲线、衰减曲线以及全波列波形.结果表明,挠曲波和螺旋波的衰减系数与相速度相比,对孔隙中的流体性质更敏感,且随着多极源级数的增加和工作主频的提高,挠曲波和螺旋波的衰减系数的变化程度明显增强;在偶极子和四极子激发的全波列波形中,可清晰的观测到对地层孔隙流体不敏感的地层横波,在这种情况下,可以通过对比波列中地层横波和频散的弯曲波(或螺旋波)幅度来识别气层.     

A field test of a linear stability model for crescentic bars

A morphodynamical linear stability analysis is used to predict the natural development of crescentic bed patterns and rip channels. The purpose is to investigate whether this technique, which is useful for understanding the physics of emerging bed-forms, can be used to make quantitative predictions in the field, which may then be of use for coastal engineers.     

Effects of wave–current interaction on the current profile

Wave–current laboratory experiments have shown that the logarithmic current profile observed in pure current flows is modified due to the presence of waves. When waves propagate opposite the current, an increase in the current intensity is achieved near the mean water level, while a reduction is obtained for following waves and currents. With the aim of analyzing these nonlinear effects along the whole water column, an Eulerian wave–current model is presented. In contrast to previously presented wave–current models, the present is able to include the variation of the free surface elevation due to the wave motion and the effect of a non hydrostatic pressure field. Therefore it does not restrict its application to waves in shallow waters. Moreover, the model is able to simulate all the possible angles between waves and currents.