Postglacial topographic evolution of glaciated valleys: a stochastic landscape evolution model

The retreat of valley glaciers has a dramatic effect on the stability of glaciated valleys and exerts a prolonged influence on the subsequent fluvial sediment transport regime. We have studied the evolution of an idealized glaciated valley during the period following retreat of ice using a numerical model. The model incorporates a stochastic process to represent deep‐seated landsliding, non‐linear diffusion to represent shallow landsliding and an approximation of the Bagnold relation to represent fluvial sediment transport. It was calibrated using field data from several recent surveys within British Columbia, Canada. We present ensemble model results and compare them with results from a deterministic linear‐diffusion model to show that explicit representation of large landslides is necessary to reproduce the morphology and channel network structure of a typical postglacial valley. Our model predicts a rapid rate of fluvial sediment transport following deglaciation with a subsequent gradual decline, similar to that inferred for Holocene time. We also describe how changes in the model parameters affect the estimated magnitude and duration of the paraglacial sediment pulse. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical simulation for 1975 Haicheng and 1999 Xiuyan earthquake processes by DDA+FEM

Introduction The Xiuyan earthquake(MS=5.4)on Nov.29,1999,occurred between Hushan town and Pi-anling town at the southeast end of the aftershocks of Haicheng earthquake(MS=7.3).These two earthquakes′sequences are highly similar in the way that the foreshocks are very frequent,focal mechanisms of the main shocks are about the same and fault strikes are approximately in the same direction.It is important to study these earthquakes for further research on seismogenesis to fore-cast earthquake…     

Interevent Time Distribution in Seismicity: A Theoretical Approach

This paper presents an analysis of the distribution of the time τ between two consecutive events in a stationary point process. The study is motivated by the discovery of unified scaling laws for τ for the case of seismic events. We demonstrate that these laws cannot exist simultaneously in a seismogenic area. Under very natural assumptions we show that if, after rescaling to ensure Eτ =1, the interevent time has a universal distribution F, then F must be exponential. In other words, Corral’s unified scaling law cannot exist in the whole range of time. In the framework of a general cluster model we discuss the parameterization of an empirical unified law and the physical meaning of the parameters involved. An erratum to this article is available at .     

Relief-rejuvenation and topographic length scales in a fluvial drainage basin, Napf area, Central Switzerland

This paper explores how, and to what extent, a phase of relief-rejuvenation modifies the mode of surface erosion in an approximately 63 km² drainage basin located at the northern border of the Swiss Alps (Luzern area). In the study area, the retreat of the Alpine glaciers at the end of the Last Glacial Maximum (LGM) caused base level to lower by approximately 80 m. The fluvial system adapted to the lowered base level by headward erosion. This is indicated by knickzones in the longitudinal stream profiles and by the continuous upstream narrowing of the width of the valley floor towards these knickzones. In the headwaters above these knickzones, processes are still to a significant extent controlled by the higher base level of the LGM. There, frequent exposure of bedrock in channels and especially on hillslopes implies that sediment flux is to a large extent limited by weathering rates. In the knickzones, however, exposure of bedrock in channels implies that sediment flux is supply-limited, and that erosion rates are controlled by stream power.The morphometric analysis reveals the existence of length scales in the topography that result from distinct geomorphic processes. Along the tributaries where the upstream sizes of the drainage basins exceed 100,000–200,000 m², the mode of sediment transport and erosion changes from predominantly hillslope processes (i.e., landsliding, creep of regolith, rock avalanches and to some extent debris flows) to processes in channels (fluvial processes and debris flows). This length scale reflects the minimum size of the contributing area for channelized processes to take over in the geomorphic development (i.e., threshold size of drainage basin). This threshold size depends on the ratio between production rates of sediment on hillslopes, and export rates of sediment by processes in channels. Consequently, in the headwaters, erosion rates and sediment flux, and hence landscape evolution rates, are to a large extent limited by weathering processes. In contrast, in the lower portion of the drainage basin that adjusts to the lowered base-level, rates of channelized erosion and relief formation are controlled mainly by stream power. Hence, this paper shows that base-level lowering, headward erosion and establishment of knickzones separate drainage basins in two segments with different controls on rates of surface erosion, sediment flux and relief formation.     

Soil–rock-forming processes and engineering mechanical properties of the ancient gravel stratum near Nanjing, China

The ancient gravel stratum near Nanjing, China, is a major stratum of Cenozoic age along the middle–lower reaches of the Yangtze River. This paper first presents a typical geological profile and material composition of the ancient gravel stratum, and then discusses its geologic origin, soil–rock-forming processes, engineering mechanical properties, and their relations. These analyses are useful for city planning, geotechnical engineering, construction, and characterization of the geological environment in the Nanjing area.     

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

地质微生物地球化学作用的意义与展望

概要论述了地质微生物学、地下水微生态学、微生物地球化学作用的基本概念、研究内容、研究现状、科学意义、关键问题、发展前景和在地下水环境保护中的作用。该研究领域不仅拓宽了整个地质科学的研究范畴,而且推动了地质科学的发展,具有一定的创新性。     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

Geochemical and isotopic investigation of the aquifer system in the Djerid-Nefzaoua basin, southern Tunisia

In the Djerid-Nefzaoua region, southern Tunisia, about 80% of agricultural and domestic water supply is provided by the complex terminal (CT) aquifer. However, 20% of this demand is provided by other hydraulically connected aquifers, namely the continental intercalaire (CI) and the Plio-Quaternary (PQ). Overexploitation of the CT aquifer for agricultural practices has contributed to the loss of the artesian condition and the decline of groundwater level which largely increased the downward leakage from the shallow PQ aquifer. Excess irrigation water concentrates at different rates in the irrigation channels and in the PQ aquifer itself. Then, it returns to the CT aquifer and mixes with water from the regional flow system, which contributes to the salinization of the CT groundwater. A geochemical and isotopic study had been undertaken over a 2-years period in order to investigate the origin of waters pumped from the CT aquifer with an emphasis on its hydraulic relationships with the underlying and the overlying CI and PQ aquifers. Geochemistry indicates that groundwater samples collected from different wells show an evolution of the water types from Na-Cl to Ca-SO₄-Cl. Dissolution of halite, gypsum and anhydrite-bearing rocks is the main mechanism that leads to the salinization of the groundwater. Isotopic data indicate the old origin of all groundwater in the aquifer system. Mixing and evaporation effects characterizing the CT and the PQ aquifers were identified using δ²H and δ¹⁸O relationship and confirmed by the conjunction of δ²H with chloride concentration.