TEM法在寻找煤矿突水巷道中的应用

在地质勘探中,TEM法体积效应影响小,探测深度大,对低阻反映灵敏,因此,其作为一种物探手段,已被广泛应用于地球物理勘探的各个领域。TEM法在煤矿突水巷道勘探中,曲线形态为高电位单峰异常,这个特征用于煤矿充水巷道探测准确度高,效果明显。     

填土引发的桩基负摩阻力问题及其灌浆处理技术

阐述了填土地基的沉降计算方法，分析了填土引发桩基负摩阻力的机理及危害，探讨了采用压力灌浆技术加固填土地基、消除桩基负摩阻力、控制桩基沉降的加固机理、施工工艺和应用效果。     

几种常见矿物的接触角测定及其讨论

为了评价矿物表面与特征液体的界面能量，分别测定了长石、石英、黑云母、方解石、萤石和黄铁矿等7种常见矿物与水、正庚烷和正丁醇的接触角，并计算了相应的表面自由能。结果表明同一矿物不同结晶面(晶面)的接触角有一定的差异，这一差异与矿物结构面上原子种类和相对含量差异有一定的对应关系。     

医院住院部大楼抗震性能评价

以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。     

Parameters affecting maximum fluid transport in large aperture fractures

We present results of laboratory experiments to study the behavior of liquids moving in unsaturated wide-aperture fractures. A 5-mm-thick glass plate cut with a 1.7-mm aperture was used as a fractured rock analog to study behavior of film and capillary droplet flow modes. Flow rates ranged between 0.6 and 6.0 ml/min. Variability in the ambient barometric pressure, resulting from weather conditions, seemed to play a role in the natural selection of flow mode. For droplet mode, constant input conditions resulted in highly variable transport properties within the fracture. The advancing meniscus exhibited a dynamic contact angle that was a function of the droplet speed and much larger than the static contact angle. Flow rate was reduced due to the larger contact angle. Analytical expressions for droplet velocity and flow capacity are presented as a function of the dynamic rather than the static contact angle.     

Interaction between two sliders in a system with rate- and state-dependent friction

This study examines slip recurrence patterns in a two-block spring-slider model with rate- and state-dependent friction. Both weak and strong heterogeneities are considered with different settings of coupling stiffness. The results show that the recurrence pattern of slips strongly depends on the degree of coupling between the two blocks. With strong coupling between the two blocks (e.g., kc/ki max >~1), the slip pattern of the system is simple and characterized by periodical stick-slips, with the two blocks slipping together. With strong heterogeneity in friction strength, period-2 motion is found for moderate coupling stiffness (kc/ki max=0.4) between the two blocks. More complicated patterns are found with weak coupling stiffness (kc/ki max=0.2) and strong heterogeneity. With strong heterogeneity, very weak coupling leads to chaotic slip patterns. With coupling stiffness kc=5 ki max and strong heterogeneity, chaotic slip patterns are not found, in contrast with the results by Huang and Turcotte who employed the classical static/kinetic friction law.     

Comparative study of the inelastic response of base isolated buildings

This article presents a numeric comparative study of the inelastic structural response of base isolated buildings. The comparative study includes the following isolation systems: laminated rubber bearings, New Zealand one, pure friction and the frictional pendulum ones. The study is based on obtaining non‐linear response spectra for various design parameters using six earthquake records. Usually the base isolation of a new building seeks to maintain the structure in the linear elastic range. The response of old weak buildings or the response of new ones subjected to extreme earthquakes may not be, necessarily, in the aforementioned ideal elastic range. Consequently, it is important to characterize the response of isolated buildings responding inelastically. A conclusion from this research is that the isolators affect significantly the structural response of weak systems. Rubber isolators seem slightly less sensitive to plastification that may occur in the structure compared to friction isolators. Ductility demands in the structure are affected significantly by friction and neoprene protected systems, in particular sliding ones where larger demands are obtained. Copyright © 2002 John Wiley & Sons, Ltd.     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.     

GPS折射角资料的变分同化试验

越来越多的新型观测资料为数值天气预报水平的进一步提高提供了许多新的机会。在各种新型的观测资料中,GPS(全球定位卫星系统)折射角资料无疑是非常重要的。GPS折射角资料具有分辨率高、全天候探测、覆盖全球等优点,实现对GPS折射角资料的变分同化,将具有非常重要的意义。文中介绍了如何获得及同化GPS折射角资料的原理。对GPS折射角资料的变分同化可以分为两种:间接同化和直接同化,文中对这两种方法都作了具体介绍。在变分同化的最小化过程中,计算效率无疑是最重要的,而优化步长的计算又直接关系到算法效率的成败。根据最小化算法的特点,通过数学推导,得出一种适合于各种最小化算法的计算优化步长的自适应方法。最后,还利用1995年10月11日的GPS折射角资料进行了数值试验,结果表明了变分同化方法和计算优化步长方法的有效性。     

导线测角精度超限问题的探讨

利用实例阐述了一、二级导线测量严密平差后，测角中误差超限问题，根据《规范》精度指标，分析了测角中误差超限的原因；提出一、二级导线测量严密平差后，没边、测角中误差限值的建议。