西非宽扎盆地烃源岩分布及油气成藏

宽扎盆地为南大西洋被动大陆边缘盆地,构造演化可划分为裂谷期、过渡期和后裂谷期3个阶段,过渡期发育阿普特阶盐岩。宽扎盆地主要发育3套烃源岩:盐下下白垩统阿普特阶湖相烃源岩、盐间早白垩世阿普特期海相烃源岩和盐上古近纪始新世海相烃源岩。宽扎盆地油气田均围绕烃源灶分布,烃源岩是该盆地油气藏形成与分布的主控因素。宽扎盆地发育4套含油气系统(盐下下白垩统、盐间下白垩统、盐上上白垩统和盐上古近系)以及2种成藏模式(古生新储和自生自储)。宽扎盆地深水21区块Cameia-1井、Cameia-2井以及21区块Azul-1井盐下地层获得重大油气勘探突破,表明该盆地深水区存在盐下下白垩统含油气系统并发育优质湖相烃源岩,提高了宽扎盆地深水区油气勘探潜力。     

张扭性断陷盆地构造样式与油气成藏的关系——以珠江口盆地恩平凹陷新生界为例

从张扭性断陷盆地的断裂特征入手,结合构造动力学形成机制,总结了恩平凹陷的构造样式特征及有利圈闭类型,并探讨了构造样式对烃源岩的形成和油气富集区带的控制作用。结果表明:恩平凹陷为双向伸展的上下构造层变形系统的叠合,即古近系为NE-EW向伸展构造系统,新近系为NW-NWW向伸展-张性扭动构造系统;发育了4大类伸展型构造样式,构造样式演化控制了半地堑结构、烃源岩发育情况、油气的初始运移方向和断裂构造带与圈闭类型分布,为新生界油气藏的形成创造了有利条件。     

港池泊稳的能量平衡方程数值模拟

对基于能量平衡方程的多向随机波浪传播数学模型进行改进,通过模拟不同防波堤绕射引起的港池泊稳,验证模型的合理性和有效性。利用非线性弥散关系提高模型计算浅水变形的精度;采用二次逆风差分格式离散控制方程,避免了加入绕射项引起的数值耗散;并将文氏谱加入模型中,使其更加适合中国海域的工程应用。应用改进后模型绘制的双突堤和岛式防波堤绕射系数图与我国《海港水文规范》图进行了对比。对比结果十分接近,可以较好地描述港池的泊稳状况,为综合计算波浪在近岸的浅水变形、折射、绕射、反射和能量耗散等作用奠定了基础。     

因子分析在海河流域石油类污染综合评价中的应用(英文)

基于因子分析对2012~2013年海河流域pH、DO、COD、BOD5、氨态氮和总石油烃等6项水质指标的监测数据进行统计,并对其中四项指标进行水污染综合指数评估,旨在对海河水质进行较为系统的评价。结果显示,BJ1和HB2两个站位水质属于Ⅳ类标准,其余各站位均为Ⅴ类;各站位综合评价结果得到海河流域指数为1.44,说明海河流域处于污染状态,其污染程度超过该流域功能区的标准。因子分析发现,COD、DO和NH3-N之间差异显著(P0.05);主成分分析显示,除pH和BOD5外,其余指标都在0.70以上;COD、DO、NH3-N和TPH的贡献率较高,其中总石油烃的贡献率为100%,因此可以认为该海域的污染类型属于有机污染,且石油烃污染较为突出。     

南黄海盆地中部隆起的形成与演化

南黄海盆地是在前震旦系克拉通基础上发育的中、古生界海相与中、新生界陆相多旋回叠合盆地。通过地震资料解释,结合邻区钻井与区域地质资料,对南黄海盆地中部隆起中、古生代地层及其形成演化进行了研究,结果表明,南黄海盆地中部隆起沉积了较全的中、古生界海相地层,发育第四系—新近系、中—下三叠统青龙组、上二叠统、下二叠统—上泥盆统、中—下志留统,奥陶系—震旦系和前震旦系变质岩系等7套地震地质层序;主要经历了前震旦纪基底形成、震旦纪—早古生代克拉通发育、晚古生代—中三叠世稳定台地—陆内裂陷、晚三叠世—古近纪形成与抬升剥蚀及新近纪-第四纪坳陷沉降5个阶段。     

Granular experiments of thrust wedges: Insights relevant to methane hydrate exploration at the Nankai accretionary prism

The accumulation mechanism of methane hydrates has been a central issue in previous hydrate research regarding the Nankai accretionary prism, southwest of Japan. Expulsion of formation fluids is significant during the prism accretion process, and the migration of these methane-bearing fluids exerts a strong control on the accumulation of hydrates. Two types of fluid pathways, inter-granular porosity and faults, need to be evaluated to understand hydrate accumulation. Fluid migration along faults can be partly modeled by examining faulting activity. Our study modeled the accretion process by using two granular methods that approximated the geologic body as an assemblage of particles: (1) analog experiments using granular materials, and (2) a numerical simulation based on the distinct element method. The analog experiments closely reproduced the prism geometry observed in seismic profiles across the Nankai accretionary prism. Digital image correlation analysis indicated that the frontal thrust is generally active but older structures are also frequently reactivated. The numerical simulations produced prism geometries similar to those of the analog experiments. The velocity distributions of the particles showed evidence of episodic faulting and reactivation, but the internal stress field exhibited little change in the deeper part of the prism during deformation. The frequent and substantial changes in fault activity displayed by the models indicate episodic fluid flow along fault surfaces. Active frontal thrusting suggests that formation fluids generally migrate from deep within the prism to the deformation front, but may move along reactivated older faults. Inter-granular permeability also fluctuates, as it is controlled by temporal and spatial variations in the internal stress field. However, fluid flow is likely to be relatively stable in the deeper segment of the prism.     

Cenozoic folding in the Cumuruxatiba basin,Brazil: An approach to the deformation trigger by the Abrolhos magmatism

The Cumuruxatiba basin is located in the central portion of the eastern Brazilian margin surrounded by Cenozoic magmatic highs that belong to the Abrolhos Magmatic Complex. This basin was formed by rifting, in the Neocomian followed by thermal subsidence during late Cretaceous like other basins along the Eastern Brazilian margin. In the Cenozoic, the Abrolhos magmatism took place as sills and dykes intruded the sedimentary section, primarily during the Paleogene. In that time, there was a strong NS contractional deformation in the basin represented by folds related to reverse faults coeval with Abrolhos magmatism activity. The structural restorations of regional 2D seismic sections revealed that most of the contractional deformation was concentrated at the beginning of the Cenozoic with maximum peak at the Eocene (up to 33% of total shortening and rate of 6 km/Ma). The Post-Eocene period was marked by a decrease in the strain rate that continues to the present day (around 4 km/Ma to less than 1). 3D structural modelling exhibited a major, well-developed E–W to NE–SW fold belt that accommodated most of the contractional Cenozoic deformation between Royal Charlotte and Sulphur Minerva magmatic highs. Volcanic eruptions and magmatic flows from the Abrolhos complex resulted in differential overburden on edge of the basin, acting as a trigger for halokinesis and the subsequent formation of fault-related folds. In general, such structures were developed close to adjacent magmatic highs, commonly exhibiting vergence towards the centre of the basin. Some magmatic features formed coeval with Cenozoic syn-deformation sediments clearly indicate that Abrolhos magmatism activity and contractional deformation development were associated. The study of the thickness variation of the syn-deformation section in relation to fault-related folds on deformation maps and maximum strain diagrams revealed that most folds were activated and re-activated several times during the Cenozoic without a systematic kinematic pattern. This lack of systematic deformation might be related to the variation of the magmatic pulse activity of adjacent magmatic highs resulting in a complex interference pattern of Cenozoic folds. These structural interpretations of the timing of fault-related folds that are potential Cenozoic traps in the Cumuruxatiba basin play a fundamental role in petroleum systems and exploration of low-risk hydrocarbon prospects.     

Lacustrine basin unconventional resource plays: Key differences

There has been a revival in hydrocarbon source rock characterization and development associated with growing interest in unconventional resources, where these fine-grained organic-rich rocks act as both source and reservoir. To-date, the exploration focus on shale reservoirs has been largely on marine systems. Lacustrine source rocks for conventional resources are geographically important, dominating regions such as China, Indonesia, and Brazil's resource-base. However, they have been generally untested for unconventional resources.There are a number of key differences in the nature of these hydrocarbon systems that should be considered when assessing whether lacustrine systems may represent future unconventional opportunities in areas where the conventional resource-base is dominated by lacustrine-sourced oil. Among the key differences between these depositional systems is the greater sensitivity to high frequency climatic variability within lacustrine systems. Lacustrine systems are highly sensitive to changes in the balance between precipitation and evaporation, which may lead to rapid changes in lake level, potentially exceeding 600 m. These changes in depositional conditions are geologically rapid and may occur over periods of thousands of years. Such changes can reduce the areal extent of potentially thick source rock intervals to only those portions of a basin where a permanent deep lake was present. Thus the core unconventional target area may be geographically limited compared with their marine counterpart. Although potentially areally limited, a review of many lacustrine source rocks suggests that their thicknesses are often significantly greater than marine source rocks. An examination of the more distal portions of lacustrine systems, where better source rock potential is present reveals that there is generally limited connectivity between source and conventional reservoir. In these settings, such as the Wind River basin (Waltman Shale), the hydrocarbons remain trapped within the shales, potentially leading to over-pressured hydrocarbon charged systems. Such conditions suggest that although areally limited, viable unconventional targets may exist, if suitable reservoir conditions are present. Finally, the character of the oils produced is different in these settings, with lacustrine oils being waxy and displaying different hydrocarbon generation and cracking kinetics. High wax oils display distinct flow characteristics, being more viscous, and may offer different production challenges than their non-waxy marine equivalents. Additionally, differences in their cracking kinetics may indicate that the timing of gas generation for shale gas plays may differ significantly from marine systems.     

Origin and anatomy of two different types of mass–transport complexes: A 3D seismic case study from the northern South China Sea margin

Integration of 2D and 3D seismic data from the Qiongdongnan Basin along the northwestern South China Sea margin has enabled the seismic stratigraphy, seismic geomorphology and emplacement mechanisms of eight separate, previously undocumented, mass–transport complexes (MTCs) to be characterized. These eight MTCs can be grouped into two types:(1) Localized detached MTCs, which are confined to submarine canyons and cover hundreds of km², consist of a few tens of km³ remobilized sediments and show long striations at their base. They resulted from small-scale mass-wasting processes induced by regional tectonic events and gravitational instabilities on canyon margins.(2) Regional attached MTCs, which occur within semi-confined or unconfined settings and are distributed roughly perpendicular to the strike of the regional slope. Attached MTCs occupy hundreds to thousands of km² and are composed of tens to hundreds of km³ of remobilized sediments. They contain headwall escarpments, translated blocks, remnant blocks, pressure ridges, and basal striations and cat-claw grooves. They were created by large-scale mass-wasting processes triggered by high sedimentation rates, slope oversteepening by shelf-edge deltas, and seismicity.Our results show that MTCs may act as both lateral and top seals for underlying hydrocarbon reservoirs and could create MTC-related stratigraphic traps that represent potential drilling targets on continental margins, helping to identify MTC-related hydrocarbon traps.     

准噶尔盆地火山岩分类研究与应用

岩石分类一直是人们长期探索的课题。由于油气勘探的需要,针对储层研究的盆地火山岩分类已经成为火成岩研究的重要新方向。在综合分析国内外火山岩分类研究的基础上,根据3条野外剖面和21口钻井岩心岩屑的观察描述、岩石薄片鉴定和化学成分分析等资料,依照结构-成分-成因分类原则,建立了适于储层评价的准噶尔盆地石炭系火山岩及其他岩类的岩性分类体系和识别标准。将本区火山岩划分为火山熔岩、火山碎屑熔岩、火山碎屑岩、沉火山碎屑岩等4大类;同时将盆地内与火山岩共生的其他岩类也进行分类和识别,共划分出8大类45种基本类型。与我国东部的中新生代盆地火山岩不同,本区古生代火山岩普遍遭受较长期风化改造和蚀变作用,常见有绿泥石化、碳酸盐化和黏土矿化。这些蚀变会影响到TAS图解岩性判别的结果,因此笔者探讨了蚀变条件下的岩石识别和定名方法。本文分类体系针对火山岩储层研究,结果显示,基于该分类体系岩性与储集空间的类型及其变化规律呈现明显相关性,不同岩性的储集空间类型、组合方式和发育程度存在差异,由此可指导火山岩油气勘探。