脉冲型耀斑中阿尔芬波湍流加速3He和重离子机制探讨

基于在^3He丰富事件中，高能^3He和重离子具有相似的幂律谱分布这一观测结果，通过数值求解Fokker-Planck方程，探讨经阿尔芬波湍动速后的离子分布随时间的演化特征。计算结果表明：加速源区的等离子体密度和阿尔芬波湍动能量密度对粒子能谱分布起主要作用，如果取加速源区等离子体密度n=(0.1-1)10^10cm^-3、磁场强度B=50-100Gs、湍动能量密度为0.4-2ergs cm^-3，则在1秒左右的时间内，湍动阿尔芬波能够将^3He和重离子加速到10MeV/nucleon量级，能谱指数为2.0-3.5。理论计算与观测结果基本一致。     

A STUDY ON REGIONAL DIFFERENCE OF CHINA＇S PAID URBAN LANDUSE SYSTEM AND GRADING

董黎明，李向明，冯长春ＡＳＴＵＤＹＯＮＲＥＧＩＯＮＡＬＤＩＦＦＥＲＥＮＣＥＯＦＣＨＩＮＡ＇ＳＰＡＩＤＵＲＢＡＮＬＡＮＤＵＳＥＳＹＳＴＥＭＡＮＤＧＲＡＤＩＮＧ￥ＤｏｎｇＬｉｍｉｎｇ；ＬｉＸｉａｎｇｍｉｎｇ；ＦｅｎｇＣｈａｎｇｃｈｕｎ（ＰｅｋｉｎｇＵｎｉ...     

Trace metals in the Göta river estuary

The concentrations of the trace metals Cd, Cu, Fe, Ni, Pb and Zn in the Göta River estuary have been investigated. The following metal fractions have been determined: acid-leachable, dissolved, labile and particulate.The estuary represents a salt wedge type estuary and is situated in a densely populated region of Sweden. The metal concentrations found for the dissolved fraction is in the range of what can be considered as background levels for freshwater. It is difficult to evaluate any estuarine processes other than conservative mixing for Cd, Cu, Ni and Zn. The dissolved levels in the freshwater end member are Cd, 9–25 ngl^?1; Cu, 1·1–1·4 μgl^?1; Fe, 20–75 μg l^?1: Ni, 0·7–0·9 μg l^?1: Pb 0·09–0·2 μg l^?1; and Zn, 6–7 μg l^?1:The results from the acid-leachable fraction show that at high suspended load the particles sediment in the river mouth. The trace metal levels in this fraction are subject to large variations.     

海冰动力学数值方法研究进展

在海冰动力学数值模拟和预测研究中,人们将海冰视为连续介质分别建立了欧拉坐标下的有限差分（FD）方法、拉格朗日坐标下的光滑质点流体动力学（SPH）方法、欧拉和拉格朗日坐标相结合的质点网格法（PIC）,近年来又发展了基于非连续介质的颗粒流（GF）方法。对以上几种海冰动力学数值方法的特点和适用性进行了讨论,结果表明：FD、PIC和SPH方法可适用于中长期海冰动力学数值模拟,但SPH方法的计算效率需进一步提高;GF方法在不同尺度下的海冰动力学数值模拟中的计算精度均有很强的适用性,但目前较适用于小尺度下海冰动力学基本特性的数值试验研究,计算时效还不能满足实际海冰数值模拟和预测的要求。为进一步提高海冰动力学模拟的精度和适用性,在不同时空尺度下分别发展与其相适应的数值方法是必要的。     

利用粒子滤波进行动态精密单点定位观测异常影响控制

采用粒子滤波控制观测异常影响,提高动态精密单点定位精度。粒子滤波是一种非高斯噪声分布的动态滤波,通过重点概率密度进行随机采样以获取高精度状态参数;根据观测噪声概率密度、状态噪声概率密度以及重点概率密度等因素确定粒子权值,降低受污染粒子对定位结果的影响;采用Kalman滤波进行重点采样,减缓粒子退化;采用单差无电离层固定模糊度,减少状态参数维数,进而减少粒子的选取个数。实测数据结果表明,粒子滤波有效控制了观测异常影响,提高了动态精密单点定位的精度。     

2011年夏季南大洋普里兹湾颗粒态生物硅的分布与变化特征

利用中国第27次南极科学考察期间获得的颗粒物样品,对南大洋普里兹湾海域水体中颗粒态生物硅的含量及分布特征进行了初步研究,分析了该海域颗粒态生物硅与营养盐、浮游植物以及颗粒有机碳之间的关系,同时结合历史数据对比了颗粒态生物硅的年际变化情况。研究结果显示：在2011年夏季普里兹湾表层水体中颗粒态生物硅含量在0.76-19.72μmol/ dm3之间变化,平均为6.06±4.55μmol/ dm3。在表层水体中的分布趋势是67°S以南的湾内区域颗粒态生物硅含量明显高于67°S以北的湾外区域,最大值出现在普里兹湾陆架区。在垂向分布上,P3断面水体中颗粒态生物硅含量随深度增加而减少。根据不同年份即24,25,26,27次南极科学考察期间获取的数据对比分析显示,颗粒态生物硅含量虽存在一定的年际差异,但是在普里兹湾的分布趋势基本一致。颗粒态生物硅含量的变化特征与硅酸盐相反与叶绿素a、颗粒有机碳相似。     

天津武清地区云凝结核变化特征

利用2009年11—12月在天津武清气象局测量的云凝结核(CCN:Cloud Condensation Nuclei)浓度资料以及气溶胶数谱分布的观测资料,分析了武清地区在不同过饱和度(0.1%～1.0%)下云凝结核浓度及活化率的变化特征。结果表明:武清地区冬季CCN数浓度变化范围很大,过饱和度1%时,浓度变化范围为4000～32000cm-3,且浓度受风速影响明显,风速2级以下CCN数浓度很高,过饱和度1%时,其平均浓度可达16000cm-3,但对于4级风速以上CCN平均浓度为4000cm-3左右;在过饱和度0.1%～0.4%间CCN浓度变化较大,过饱和度每增加0.1%,CCN浓度增加值平均约为过饱和度0.4%～1.0%间浓度增量的5倍。低过饱和度(0.1%、0.2%)下,活化率受风速影响明显,1级风速下的CCN活化率约为4级风速下的3倍,但在过饱和度1%时活化率则相差不大。CCN浓度的日变化呈双峰型,峰值时刻为北京时间08:00和18:00左右,活化率的日变化则呈双谷型,这主要是受局地排放影响的结果。利用指数函数拟合各风速下CCN浓度过饱和度谱,表明该地谱型为典型的大陆型。     

复杂战场电磁态势三维可视化研究

战场电磁环境的透明化及其态势可视化是一个急需解决的问题。分析复杂战场电磁环境可视化构建内容,针对不同军用电磁辐射特点,介绍体绘制和基于粒子系统的电磁态势可视化方法,实现地理环境和电磁环境的一体化显示,为指挥员提供及时、全面动态的电磁态势信息。     

Source attribution of urban smog episodes caused by coal combustion

Stable weather conditions together with extensive use of coal combustion often lead to severe smog episodes in certain urban environments, especially in Eastern Europe. In order to identify the specific sources that cause the smog episodes in such environments, and to better understand the mixing state and atmospheric processing of aerosols, both single particle and bulk chemical characterization analysis of aerosols were performed in Krakow, Poland, during winter 2005.Real-time measurements of the bulk PM10 aerosol during a severe smog episode (PM10 mass > 400 µg m^− 3) showed a stable concentration of black carbon in the aerosol, and an increase in the sulphate and chlorine mass contributions towards the end of the episode. Chemical characterization of single particles further helped to identify residential coal burning as the main source that caused this severe smog episode, consisting of single particles with major signals for carbon with simultaneous absence of sulphate, chlorine and calcium. Particles from industrial coal combustion gained importance towards the end of that episode, after residential coal combustion was switched off, indicated by an increase of the percentage of sulphate and chlorine containing particles. Traffic was not a significant source during the severe smog episode. During a lighter smog episode, residential and industrial coal combustion was still predominant, with an increased contribution of traffic and processed/aged aerosols. On a clean day, particle classes containing nitrate were the most abundant. In addition, the aerosol was more internally mixed showing that there were more sources contributing to the total aerosol population.