鄱阳湖沙地沉积物粒度特征及其影响因素北大核心CSCD

鄱阳湖沙地是亚热带湿润区典型风沙化土地,土地沙化问题严峻。鄱阳湖沙地研究多在小范围开展,研究意义有限,应在多处进行沙地粒度比对研究。选取庐山市、都昌县、永修县和南昌市新建区等沙地样品57个,分析其粒度特征。结果表明:(1)鄱阳湖沙地主要由中沙、细沙和粗沙组成,三者总含量超90%;Mz均值为1.79Φ,分选较差,呈正偏和尖锐分布;(2)鄱阳湖沙地不同土地类型沉积物表层(0-5 cm)与20-40 cm深度粒度特征存在一定差异,固定沙丘、半固定沙丘、流动沙丘和河滩表层比20-40 cm深度粒径大,但流动沙丘和湿地草滩表层分选优于20-40 cm深度;湿地草滩和河滩优势粒级含量和粒度参数有别于沙丘;(3)鄱阳湖沙地固定沙丘、半固定沙丘和流动沙丘为风成沉积;河滩以河流作用为主,风蚀为辅;湿地草滩是在风力和水动力共同作用下形成的。鄱阳湖沙地沿盛行风向从南到北S、SK、K依次减小,风沙运动多以两跳一悬式为主,以就地起沙为主,河滩湖滩作为补充。     

干涸尾闾湖盆区泥漠地表磨蚀释尘特征

沙粒的表面磨蚀效应是地表产尘、释尘的重要机制,针对干湖盆泥漠地表开展磨蚀释尘实验研究,对理解干湖盆地表风蚀过程及盐碱尘暴形成机理具有重要意义。对采自西居延海干涸湖盆泥漠地表土样进行室内磨蚀模拟实验,研究了不同粒级（细、中、粗）沙粒不同落沙角度（30°,45°,60°）的磨蚀效应。结果表明：（1）泥漠地表磨蚀实验中能够产生明显释尘效应的沙粒粒级阈值为中沙（0.25 mm<M_d<0.50 mm）;（2）磨蚀粒径粒级相同时,磨蚀角度会对泥漠地表磨蚀释尘速率产生影响,磨蚀量的角度排序为60°>30°>45°,但同一粒级3种角度下的磨蚀释尘率差异不显著。（3）磨蚀角度为45°时,计算了泥漠地表的质量磨蚀率与能量磨蚀率,其中中沙为0.04 g·kg^-1、0.43 g·J^-1,粗沙为0.08 g·kg^-1、0.74 g·J^-1,极粗沙为0.26 g·kg^-1、2.54 g·J^-1;在磨蚀沙粒粒级倍增而磨蚀角度不变情况下,泥漠地表磨蚀释尘率与能量磨蚀率未发生正比例线性增长变化。     

黔北镇远地区三丘田剖面寒武系明心寺组上段滨岸相沉积特征及其地质意义

沉积环境分析是古地理重建的核心内容,黔北地区寒武系明心寺组沉积环境研究存在较大争议,以致对中上扬子地区明心寺组沉积期古地理格局的认识不能统一。选取寒武系明心寺组发育齐全、出露良好的黔北镇远地区三丘田剖面为研究对象,通过野外剖面观察、室内薄片鉴定及碎屑岩粒度分析等方法对三丘田剖面明心寺组岩石学特征、沉积构造、沉积演化序列、沉积相类型进行了详细分析。结果表明:黔北镇远地区三丘田剖面寒武系明心寺组上段发育大套的石英粉-细砂岩,沉积构造以低角度冲洗交错层理为主,碎屑颗粒的成分和结构成熟度均较高;三丘田剖面明心寺组上段砂岩以双次跳跃组分为主,悬浮组分含量较少,纵向剖面自下而上显示为浅水陆棚→临滨→前滨→后滨演化序列,呈典型的陆棚相向滨岸相变化。综上所述,黔北镇远地区三丘田剖面寒武系明心寺组上段的沉积相为滨岸相。黔北镇远地区明心寺组滨岸相沉积的出现,指示了黔北地区区域上重新认识明心寺组沉积相的必要性,将直接影响对黔北地区乃至中上扬子地区寒武纪古地理格局及其大地构造背景的认识。     

Patterns of mixed siliciclastic‐carbonate sedimentation adjacent to a large dry‐tropics river on the central Great Barrier Reef shelf,Australia

The Great Barrier Reef represents the largest modern example of a mixed siliciclastic‐carbonate system. The Burdekin River is the largest source of terrigenous sediment to the lagoon and is therefore an ideal location to investigate regional patterns of mixed sedimentation. Sediments become coarser grained and more poorly sorted away from the protection of eastern headlands, with mud accumulation focused in localised ‘hot spots‘ in the eastern portion of embayments protected from southeast trade winds. The middle shelf has a variable facies distribution but is dominated by coarse carbonate sand. North of Bowling Green Bay, modern coarse carbonate sand and relict quartzose sand occur. Shore‐normal compositional changes show Ca‐enrichment and Al‐dilution seawards towards the reef, and shore‐parallel trends show Al‐dilution westwards (across bays) along a Ca‐depleted mixing line. Intermediate siliciclastic‐carbonate sediment compositions occur on the middle shelf due to the abundance of relict terrigenous sand, a pattern that is less developed on the narrow northern Great Barrier Reef shelf. Rates of sediment deposition from seismic evidence and radiochemical tracers suggest that despite the magnitude of riverine input, 80–90% of the Burdekin‐derived sediment is effectively captured in Bowling Green Bay. Over millennial time‐scales, stratigraphic controls suggest that sediment is being preferentially accreted back to the coast.     

Sediment and particulate phosphorus characteristics in grassed waterways from row crop corn and alfalfa fields collected by manual University of Exeter samplers and automatic sampling

Phosphorus (P) export from agricultural lands above known threshold levels can result in adverse impacts to receiving water quality. Phosphorus loss occurs in dissolved and sediment‐bound, or particulate phosphorous (PP), forms, with the latter often dominating losses from row‐cropped systems. To target practices, land managers need good computer models and model developers need good monitoring data. Sediment monitoring data (e.g. radiometric finger printing and sediment P sorption capacity) can help identify sediment source areas and improve models, but require more sediment mass than is typically obtained by automatic sampling. This study compares a simple suspended sediment sampler developed at the University of Exeter (UE) with automatic sampling in intermittent channels draining corn and alfalfa fields. The corn field had a greater runoff coefficient (27%) than alfalfa (11%). No differences were found in enrichment ratios (sediment constituent/soil constituent) in PP (PP_ER) or percent loss on ignition (LOI_ER) between paired UE samplers on corn. The median LOI_ER for the UE samplers (1·9%) did not differ significantly (p > 0·13) from the automatic sampler (2·0%). The PP_ER from the UE samplers was on average 20% lower than the automatic samplers. A correlation (r² = 0·75) was found between sediment PP and % LOI from automatic samplers and UE samplers for particles < 50 µm, while for > 50 µm PP concentration did not change with changes in % LOI. Sediment ammonium‐oxalate extractable metals were similarly related to LOI, with the strongest correlation for iron (r² = 0·71) and magnesium (r² = 0·70). Copyright © 2011 John Wiley & Sons, Ltd.     

An enhanced constitutive model for crushable granular materials

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.     

用微机进行Mie散射算法研究

本文介绍在东海微机上用伦茨算法计算Mie级数的系数,其计算程序已运行成功。计算结果表明此法可使误差传播显著减小,计算精度提高,降低了对微机内存客量的要求,同时,本文得到的计算结果与国外公开发表的计算结果达到同样精度。     

On the acceleration of solar-flare charged particles in a collapsing magnetic trap with an electric potential

We consider the kinetic problem of charged-particle acceleration in a magnetic trap with converging magnetic mirrors. We show that for a positive electrostatic potential of the trap plasma relative to the mirrors, the efficiency of confinement and acceleration increases for electrons and decreases for ions.     

视景仿真中实体云的建模与渲染技术

在视景仿真中对云的建模和实时渲染是一项十分重要的工作.全面研究了视景仿真中3维实体云的建模与绘制技术,并根据视景仿真对云景仿真的需求,采用分形技术和粒子系统技术实现了一种既能获得良好的视觉效果,又能实时绘制的实体云建模与仿真技术.通过视点相关技术、层次细节技术、动态视点替用等技术大大提高了实体云仿真的实时性,使其在一般的微机平台上可以流畅运行.     

砂样图像岩屑自动分割提取方法

通过将砂样图像进行单颗粒分割,识别砂样成分,可显著提高砂样岩性分析的准确性和效率。现有的砂样图像分割方法主要以传统分水岭算法和卷积神经网络为主,但由于对单颗粒岩屑轮廓细节提取不足,误分割率高。本文提出一种以图像融合算法为桥梁,将卷积神经网络和分水岭算法相结合的单颗粒图像分割提取方法。首先利用改进的Mask R-CNN网络快速分割砂样原图,获得其初分割图像;然后,将初分割图像与砂样原图进行融合,再使用改进的分水岭算法对融合结果进行分割;最后,利用砂样原图坐标点匹配方法,将分水岭分割得到的结果图像进行修正,完成单颗粒岩屑图像提取。实验结果表明,本文的单颗粒自动分割提取方法准确率高达96.77%,且模型更轻量和精准,为岩屑图像分割提供了一种可行且有效的方法,可满足有效测算油藏层构造变化、查找潜在沉积物源及储层动态变化的需求。