基于自然水系网信息的元素运移分析

地面上的矿物或污染物元素主要是随水系而运移的。因此，利用自然水系网信息来定量分析元素沿水系的迁移、分散，对于地质找矿和环境保护都具有重要意义。在研究应用主概率权模拟模型产生自然水系网的基础上，提出了元素在水系网中运移的计算方法，结合所模拟出的水系网，具体分析了元素在其中的迁移、扩散情况，给出了正问题和反问题的计算结果。结果表明，正、反问题的求解具有一致性，方法是有效、可行的。     

PLS法与隧道围岩稳定性分类

围岩稳定性是隧道工程支护设计的基本参数,采用偏最小二乘回归法,综合考虑多因变量影响因素,对隧道围岩稳定性分类进行回归建模,并取得较好效果.     

Formation of Concentric Rings Around Sources

Zones of increased concentration formed by a solvent flowing from a source are considered. A matehmatical model for forming such zones is proposed. It takes into account that such a zone is composed of a set of independent particles. Hence the distribution of a substance around the source can be explained by movement of an individual particle. In the model this movement is a continuous semi-Markov process with terminal stopping at some random point in space. Parameters of the process depend on the velocity field of the flow. Forward and backward partial differential equations for the distribution density of a random stopping point of the process are derived. The forward equation is investigated for the centrally symmetric case. Solutions of the equation demonstrate either a maximum or a local minimum at the source location. In the latter case a concentric ring around the source is formed. If different substances vary in their absorption rates, they can form separable concentration zones as a family of concentric rings.     

小湾电站高边坡系统锚固与排水的优化设计方法

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。     

某上游法尾矿坝抗滑稳定性浅析

通过某上游法尾矿坝抗滑稳定性分析,对比分析了坝体加高、浸润线条件、排渗系统运行状况和透镜体简化对尾矿坝抗滑稳定性的影响。结果表明该尾矿坝抗滑稳定性随坝体加高而降低;排渗系统运行状况对尾矿坝抗滑稳定性的影响超过坝体加高对尾矿坝抗滑稳定性的影响;根据一定简化原则减少透镜体,从而简化剖面形状和计算复杂程度,是一种能反映工程实际但比较保守的分析方法。拟静力法并非适合于所有的尾矿堆积坝抗震稳定性分析,即便采用其所得结果也可能会出现较大偏差。     

洋脊和年轻洋壳俯冲与埃达克岩生成的热模拟

新生代以来 ,环太平洋周边分布的埃达克岩 (Adakite)主要与年轻洋壳俯冲时在 70～ 90km深处的部分熔融有关。利用数值方法 ,模拟了洋壳俯冲的热演化过程并讨论了脱水、熔融对埃达克岩浆活动的影响。结果表明 :仅在活动海岭俯冲前后约 10Ma内 ,年轻的、热的俯冲海洋板片在 75～85km深度范围内 ,温度升高至 82 5～ 10 0 0℃脱水 ,导致年轻洋壳中角闪岩部分熔融 ,形成埃达克岩(Adakite)。而一般洋壳俯冲在 10 0km以下深度才脱水 ,由于脱水区压力较高洋壳自身不能熔融 ,水进入上覆地幔楔状体导致部分熔融 ,形成安山岩 (Andesite     

Partial melting during tectonic exhumation of a granulite terrane: an example from the Larsemann Hills, East Antarctica

Anatectic migmatites in medium- to low-pressure granulite facies metasediments exposed in the Larsemann Hills, East Antarctica, contain leucosomes with abundant quartz and plagioclase and minor interstitial K-feldspar, and assemblages of garnet–cordierite–spinel–ilmenite–sillimanite. Qualitative modelling in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂, in conjunction with various P–T calculations indicate that the high-grade retrograde evolution of the terrane was dominated by decompression from peak conditions of c. 7 kbar at c. 800 °C to 4–5 kbar at c. 750 °C. Extensive partial melting during decompression involved the replacement of biotite by the assemblage cordierite–garnet–spinel within the leucosomes. These leucosomes represent the site of partial melt generation, the cordierite–garnet–spinel–ilmenite assemblage representing the solid products and excess reactants from the melting reaction. The extraction and accumulation of this decompression-generated melt led to the formation of syntectonic pegmatites and extensive granitic plutons. Leucosome development and terrane decompression proceeded during crustal transpression, synchronous with upper crustal extension, during a progressive Early Palaeozoic collisional event. Subsequent retrograde evolution was characterized by cooling, as indicated by the growth of biotite replacing spinel and garnet, thin mantles of cordierite replacing spinel and quartz within metapelites, and garnet replacing orthopyroxene and hornblende within metabasites. P–T calculations on late mylonites indicate lower grade conditions of formation of c. 3.5 kbar at c. 650 °C, consistent with the development of late cooling textures.     

地球化学样品中硒的循序提取技术

研究开发了一种硒的循序偏提取步骤，将地球化学样品中的硒选择性地循序提取到六个“操作上”定义的相态中：水溶性硒（水提取）；吸附在氧化矿物和粘土矿物上配位可交换的亚硒酸根离子（０．１ｍｏｌ／ＬＫＨ２ＰＯ４提取）；与有机质结合的硒（０．１ｍｏｌ／ＬＮａ４Ｐ２Ｏ７提取）；与铁锰铝氧化物和碳酸盐结合的硒（４．０ｍｏｌ／ＬＨＣｌ提取）；硫化物中的硒（ＫＣｌＯ３＋浓ＨＣｌ提取）；硅酸盐残渣中以副矿物和被硅质包裹的硒微粒存在的硒（ＨＦ＋ＨＮＯ３＋ＨＣｌＯ４强混合酸溶解）。对提取步骤的可行性和实用性作了详细的讨论。     

Feasibility and cost of creating an iron-phosphate coating on pyrrhotite to prevent oxidation

 Acid mine drainage (AMD) occurs when sulfide minerals are exposed to an oxidizing environment. Most of the methods for preventing AMD are either short-term or high cost solutions. Coating with iron phosphate is a new technology for the abatement of AMD. It involves treating the sulfide with a coating solution composed of H₂O₂, KH₂PO₄, and sodium acetate as a buffer agent. The H₂O₂ oxidizes the sulfide surface and produces Fe³⁺ so that iron phosphate precipitates as a coating on the sulfide surface. Experiments performed under laboratory conditions prove that an iron phosphate coating can be established on pyrrhotite surfaces with optimal concentrations of the coating solution in the range of: 0.2M/0.01M H₂O₂, 0.2M KH₂PO₄, and 0.2M sodium acetate NaAc, depending on the experimental scale. Iron phosphate coating may be a long-term solution to the problem of AMD. The method would be easy to implement; the reagent cost, however, is not low enough, although it is lower than the conventional treatment with lime. Received: 30 March 1995 · Accepted: 6 September 1995     

豆芽棚滑坡治理工程及效果

对处于临滑状态的豆芽棚滑坡进行综合治理，实施排水、加固、支档和减载等工程。经多种监测结果证明，工程治理效果良好。