2010-2018年北极夏季中国北极科学考察航行期间被动微波遥感海冰密集度与船基目视观测资料的比较

为了更有效地将卫星数据应用于北极航行导航,被动微波（PM）产品的海冰密集度（SIC）与从中国北极科学考察中收集到的船基目视观测（OBS）资料进行了比较。在2010、2012、2014、2016和2018年的北极夏季总共收集了3667组目测数据。PM SIC取自基于SSMIS传感器的NASA-Team（NT）、Bootstrap（BT）以及Climate Data Record（CDR）算法和基于AMSR-E/AMSR-2传感器的BT、enhanced NT（NT2）以及ARTIST Sea Ice（ASI）算法。使用PM SIC的日算术平均值和OBS SIC的日加权平均值进行比较。比较了PM SIC和OBS SIC之间的相关系数,偏差和均方根偏差,包括总体趋势以及在轻度/普通/严重冰况下的情况。使用OBS数据,浮冰尺寸和冰厚对不同PM产品SIC反演的影响可以通过计算浮冰尺寸编码和冰厚的日加权平均值来评估。我们的结果显示相关系数的范围为0.89（AMSR-E/AMSR-2 NT2）到0.95（SSMIS NT）,偏差的范围为-3.96%（SSMIS NT）到12.05%（AMSR-E/AMSR-2）,均方根偏差的范围为10.81%（SSMIS NT）到20.15%（AMSR-E/AMSR-2 NT2）。浮冰尺寸对PM产品的SIC反演有显著的影响,大多数PM产品倾向于在小浮冰尺寸情况下低估SIC,而在大浮冰尺寸情况下高估SIC。超过30 cm的冰厚对于PM产品的SIC反演没有明显影响。总体来看,在北极夏季,SSMIS NT SIC与OBS SIC之间有着最好的一致性,而AMSR-E/AMSR-2 NT2 SIC与OBS SIC的一致性最差。     

锥束CT图像重建算法的快速实现

本文基于锥束CT滤波反投影重建的FDK算法,通过两种算法改进并结合基于共享内存的OpenMP并行技术和代码优化,实现了锥束CT图像的快速重建.基于锥束CT实际投影数据的重建结果表明,图像重建速度得到了较大的提高,断层图像重建质量与FDK原型算法相当.     

A Review for the Thermophysics and the Yarkovsky and YORP Effects of Asteroidstwo

The thermophysics of asteroids has become an important frontier for the research of asteroids in recent years. In this paper, we have introduced the thermophysical models commonly used in this field, by using these thermophysical models and combining with the data observed by the space or ground-based IR telescopes, some thermophysical parameters of asteroids, such as the thermal inertia, geometric albedo, effective diameter, surface roughness, and surface temperature, etc., can be derived. We have mentioned also the shape model and IR observation of asteroids, as well as the obtained thermophysical parameters for a part of asteroids. These thermophysical parameters can be further applied to studying the asteroids’ Yarkovsky effect, YORP effect, and so on, even can provide the relevant information for the spacecraft landing on the asteroid surface and the return mission of a spacecraft after the asteroid sampling.     

遥感影像并行处理的数据划分及其路径优化算法

研究了一种基于数据划分的遥感影像并行处理的路径优化算法,用于解决将并行技术应用于海量遥感影像分布式存储和处理领域时其处理模型所具有的多路可达性所引起的路径动态、最优选择问题。在栅格数据可分解性分析及并行模型数据态、元素、相对信息量和映射等8个基本定义和6个性质的基础上,给出并行处理一般数学模型。以该模型为基础获得在一般并行处理情况下,以平均计算代价变量的比值作为控制横向并行与纵向并行选择方式的标志,并进一步给出四叉树索引并行生成、基于四叉树的目标检测并行处理等具体示例。最后,通过试验验证了算法的有效性,分析了算法的特点及影响因素。     

Parallelization of the flow-path network model using a particle-set strategy

High-performance simulation of flow dynamics remains a major challenge in the use of physical-based, fully distributed hydrologic models. Parallel computing has been widely used to overcome efficiency limitation by partitioning a basin into sub-basins and executing calculations among multiple processors. However, existing partition-based parallelization strategies are still hampered by the dependency between inter-connected sub-basins. This study proposed a particle-set strategy to parallelize the flow-path network (FPN) model for achieving higher performance in the simulation of flow dynamics. The FPN model replaced the hydrological calculations on sub-basins with the movements of water packages along the upstream and downstream flow paths. Unlike previous partition-based task decomposition approaches, the proposed particle-set strategy decomposes the computational workload by randomly allocating runoff particles to concurrent computing processors. Simulation experiments of the flow routing process were undertaken to validate the developed particle-set FPN model. The outcomes of hourly outlet discharges were compared with field gauged records, and up to 128 computing processors were tested to explore its speedup capability in parallel computing. The experimental results showed that the proposed framework can achieve similar prediction accuracy and parallel efficiency to that of the Triangulated Irregular Network (TIN)-based Real-Time Integrated Basin Simulator (tRIBS).     

海洋石油管线探测多波束剖面声纳设计

针对海洋石油管线探测多波束剖面声纳的高速、大容量的实时信号处理任务,以及声纳系统进一步扩展的需求,设计并实现了一种基于IP网络互连的、以并行DSP为处理节点的多波束剖面声纳系统.该系统应用于海底石油管线探测与定位,系统中的每个处理节点与数据采集转换部分采用TCP/IP网络连接,可以通过物理上添加一个或多个处理节点成倍的提高系统的信号处理能力,而在软件上无须大的改动.通过电联调与水槽试验,验证了系统的可行性和稳定性,该设计为高速水声阵列信号实时处理系统提供了一种全新的解决思路.     

Deep-sea reef fish assemblage patterns on the Blake Plateau(Western North Atlantic Ocean)

Deep‐water coral habitats are scattered throughout slope depths (360–800 m) off the Southeastern United States (SEUS, Cape Lookout, North Carolina, to Cape Canaveral, Florida), contributing substantial structure and diversity to bottom habitats. In some areas (e.g. off North Carolina) deep corals form nearly monotypic (Lophelia pertusa) high profile mounds, and in other areas (e.g. off Florida) many species may colonize hard substrata. Deep coral and hard substrata ecosystems off the SEUS support a unique fish assemblage. Using the Johnson‐Sea‐Link submersible (in 2000–2005, 65 dives), and a remotely operated vehicle (in 2003, five dives), fishes were surveyed in nine deep reef study areas along the SEUS slope. Forty‐two benthic reef fish species occurred in deep reef habitats in these study areas. Species richness was greatest on the two coral banks off Cape Lookout, North Carolina (n = 23 and 27 species) and lowest on the two sites off Cape Canaveral, Florida (n = 7 and 8 species). Fish assemblages exhibited significantly (ANOSIM, Global R = 0.69, P = 0.001) different patterns among sites. Stations sampled off North Carolina (three study areas) formed a distinct group that differed from all dives conducted to the south. Although several species defined the fish assemblages at the North Carolina sites, Laemonema barbatulum, Laemonema melanurum, and Helicolenus dactylopterus generally had the most influence on the definition of the North Carolina group. Fish assemblages at three sites within the central survey area on the Blake Plateau were also similar to each other, and were dominated by Nezumia sclerorhynchus and L. melanurum. Synaphobranchus spp. and Neaumia sclerorhynchus differentiated the two southern sites off Cape Canaveral, Florida, from the other station groups. Combinations of depth and habitat type had the most influence on these station groups; however, explicit mechanisms contributing to the organization of these assemblages remain unclear.     

附有限制条件的间接平差秩亏时解法初探

在附有限制条件的间接平差的应用中,若所列观测方程中实际用到的未知参数的个数少于所选参数的总数u时,就会出现法方程系数阵秩亏的问题。为了解决此问题,在理论公式推导的基础上,给出了一种新的解决方法,并结合算例进行了验证。     

Total electron content processing from GPS observations to facilitate ionospheric modeling

With the increasing global distribution of high rate dual-frequency global positioning system (GPS) receivers, the production of a real-time atmospheric constituent definition, total electron content (TEC), has become a beneficial contributor to the modeling applications used in the assessment of GPS position accuracy and the composition of the ionosphere, plasmasphere, and troposphere. Historically, TEC measurements have been obtained through post processing techniques to produce the quality of data necessary for modeling applications with rigorous error estimate requirements. These procedures necessitated the collection of large volumes of data to address the various abnormalities in the computation of TEC associated with the use of greater data quality controls and source selection while real-time modeling environments must rely on autonomous controls and filtration techniques to prevent the production of erroneous model results. In this paper we present methods for processing TEC in real time, which utilize several procedures including the application of an ionospheric model to automatically perform quality control on the TEC output and the computational techniques used to address receiver multipath, faulty receiver observations, cycle-slips, segmented processing, and receiver calibrations. The resulting TEC measurements are provided with rigorous error estimates validated using the vertical TEC from the Jason satellite mission.