Field Measurements and Numerical Simulations of the 2004 Tsunami Impact on the East Coast of Sri Lanka

This paper employs a numerical model of tsunami propagation together with documented observations and field measurements of the evidence left behind by the tsunami in December 2004, to identify and interpret the factors that have contributed to the significant spatial variability of the level of tsunami impact along the coastal belt of the eastern province of Sri Lanka. The model results considered in the present analysis include the distribution of the amplitude of the tsunami and the pattern of wave propagation over the continental shelf off the east coast, while the field data examined comprise the maximum water levels measured at or near the shoreline, the horizontal inundation distances and the number of housing and other buildings damaged. The computed maximum amplitude of the tsunami at water points nearest the shoreline along the east coast shows considerable variation ranging from 2.2 m to 11.4 m with a mean value of 5.7 m; moreover, the computed amplitudes agree well with the available field measurements. We also show that the shelf bathymetry off the east coast, particularly the submarine canyons at several locations, significantly influences the near-shore transformation of tsunami waves, and consequently, the spatial variation of the maximum water levels along the coastline. The measured values of inundation also show significant variation along the east coast and range from 70 m to 4560 m with a median value of 700 m. Our analyses of field data also show the dominant influence of the coastal topography and geomorphology on the extent of tsunami inundation. Furthermore, the measured inundation distances indicate no apparent correlation with the computed tsunami heights at the respective locations. We also show that both the computed tsunami heights and the measured inundation distances for the east coast closely follow the log-normal statistical distribution.     

3-D inversion of borehole-to-surface electrical data using a back-propagation neural network

The “fluid-flow tomography”, an advanced technique for geoelectrical survey based on the conventional mise-à-la-masse measurement, has been developed by Exploration Geophysics Laboratory at the Kyushu University. This technique is proposed to monitor fluid-flow behavior during water injection and production in a geothermal field. However data processing of this technique is very costly. In this light, this paper will discuss the solution to cost reduction by applying a neural network in the data processing. A case study in the Takigami geothermal field in Japan will be used to illustrate this. The achieved neural network in this case study is three-layered and feed-forward. The most successful learning algorithm in this network is the Resilient Propagation (RPROP). Consequently, the study advances the pragmatism of the “fluid-flow tomography” technique which can be widely used for geothermal fields. Accuracy of the solution is then verified by using root mean square (RMS) misfit error as an indicator.     

科里奥利力对断层作用的统计研究

首先给出了分解到已知断层面法向和切向上的断层错动科里奥利应力(简称为科里奥利法向应力和切向应力)表达式,然后从哈佛大学矩心矩张量目录中选取主余震资料进行分析,按断层分类研究了科里奥利法向应力和主震震级与其最大余震震级差及主震地震矩与余震地震矩总和之差的折合矩震级间的关系.研究结果显示:地震断层错动过程中虽然产生了使断层两盘相互拉离(或挤压)的科里奥利法向应力,它降低(或增加)了断层错动时断层面上的摩擦阻力,但是应力量值太小(科里奥利法向应力估计最大不到0.1MPa,即不到一个大气压),不足以对断层错动及主震能量释放产生影响,从而影响余震的最大震级和总体水平.     

低幅度构造识别技术在Carmen油田三维工区的应用

近年来,随着油田勘探开发的深入,规模小,构造幅度低的油气藏所占比例逐年上升,低幅度构造也逐渐受到重视.本文分析了低幅度构造的特点及地震反射特征,结合工区实际情况,提出了在地震资料解释阶段研究低幅度构造的流程和思路,总结了针对低幅度构造的主要识别方法:地震正演模拟、井控提高分辨率处理、层位精细解释、三维速度场分析、构造图倾角校正等.通过以上技术在Carmen油田三维工区识别了12个低幅度构造,结合地质、测井资料综合分析优选了两个钻探目标,取得了较好的勘探效果.     

大同盆地现今构造活动及地壳应力场特征

大量震源机制结果推断出大同分轩现代地壳应力场和主压应力方向为ＮＥ－ＮＥＥ，仰角变化不定，主张应力方向为ＮＷ－ＮＮＷ，仰角很小的结论。这与区域构造应力场ＮＥ－ＮＥＥ向挤压作用的结果相符，另据大同一阳高６．１级、５．８级地震的震源机制结果得出，大同一阳高地震的孕震应力场与华北区域应力场相一致，而不是受本地局部小区域应力场的控制的结论。     

Flow and fracture maps for basaltic rock deformation at high temperatures

Understanding how the strength of basaltic rock varies with the extrinsic conditions of stress state, pressure and temperature, and the intrinsic rock physical properties is fundamental to understanding the dynamics of volcanic systems. In particular it is essential to understand how rock strength at high temperatures is limited by fracture. We have collated and analysed laboratory data for basaltic rocks from over 500 rock deformation experiments and plotted these on principal stress failure maps. We have fitted an empirical flow law (Norton’s law) and a theoretical fracture criterion to these data. The principal stress failure map is a graphical representation of ductile and brittle experimental data together with flow and fracture envelopes under varying strain rate, temperature and pressure. We have used these maps to re-interpret the ductile–brittle transition in basaltic rocks at high temperatures and show, conceptually, how these failure maps can be applied to volcanic systems, using lava flows as an example.     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

Study of Triggering Action Between the Mani （Ms7.9） and the West Kunlun Mountains Pass （ Ms 8.1 ） Great Earthquakes and Their Dynamic Background

Based on Coulomb static stress variation, the stress trigging action of the Mani ( Ms7.9, Nov.1997) earthquake on the West Kuulun Mountains Pass (MsS.1, Nov. 2001 ) earthquake is researched. Results of different source mechanism resolutions show that a 10_3 MPa Coulomb stress due to the Mani earthquake was added to the fracture fault of the Kunlun earthquake, and this may shift the broken date to about 10 years earlier, and infer that the stress level in the crust is not low. Comparing the relationship between strong earthquake strength and frequency and earth rotation change, it is shown that the strength‘s decrease and the variation period‘ s shortening of earth rotation are important controlling factors on strong earthquake activity. This great event with Ms = 8.1 took place probably due to a gradual strengthening background of regional stress field within the Qinghai-Xizang block in the period of acceleration of change of day‘s length and stress triggering from the Mani earthquake.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

A new portable in situ flume for measuring critical shear stress on river beds

A new portable in situ flume(PISF)for measuring critical bed shear stress(CBSS)was developed in this study.The PISF consists of an open bottom sediment erosion chamber and an electrically-driven pump.Unlike most existing in situ flumes with similar designs,the new PISF does not rely on monitoring the flow conditions or particle density in the sediment erosion chamber;instead,it is a pre-calibrated flume.The calibration was performed by first determining CBSS of various selected sediment samples of known particle size and density(using the law of the wall),based on flow velocity-depth profiles measured in a 6 m straight open-channel flume using a Particle Image Velocimetry(PIV)system.These same particles of known CBSS were then used in the new in-situ flume under controlled lab conditions to obtain a series of calibration curves of CBSS vs.pump electrical power.A wide variety of particle types and sizes(simulated sediments)were used in this two-step calibration procedure to widen CBSS measurement range and simulate cohesive force effects.The size of the PISF is much smaller and more practical than other similar devices as lamellar flow conditions are not required and it can be applied to a wide range of sediment types including cohesive sediments.