基于扁铲侧胀试验的桩基水平承载力分析

依据扁铲侧胀试验的结果,对桩侧土水平抗力系数的比例系数进行了估算,并估算出单桩水平承载力设计值;根据单桩水平载荷试验的成果,计算出试验桩的水平临界荷载平均值,并得到桩侧土水平抗力系数的比例系数;在此基础上,对两者进行了对比分析,其单桩水平承载力非常接近,但比例系数存在差异。认为不宜将试桩的结果直接应用于工程桩的水平承载力计算,应根据工程桩的实际情况,考虑承台、桩群、土相互作用产生的群桩效应。     

基于抽水试验的土体渗透性耦合响应模型研究

土体中大量降排水的过程实际上是土体中有效应力增长的过程。通过对抽水试验中土体渗透系数的回归分析,建立了渗透系数与有效应力增量之间的耦合响应模型关系,说明降排水过程中土体渗透系数是呈非线性变化的。     

大型现场室内两用直剪仪研制（Ⅱ）：试验测试

利用新近研制的大型现场室内两用直剪仪，对两种不同性质的砂样进行了剪切试验。在对干砂的直接剪切试验特性进行综述的基础上，从多方面对该大型直剪仪得出的干砂剪切试验数据进行了分析验证，结果表明该大型直剪仪得出的试验数据一致性好、可靠性较高，说明该大型直剪仪的基本剪切性能稳定，可进一步应用于相关岩土材料的试验研究。     

堤坝管涌的室内试验与颗粒流细观模拟研究

本文对水流垂直方向的堤坝管涌现象分别进行了室内模型模拟和颗粒流模拟实验。在室内模型试验模拟中采用先进的数码成像跟踪设备在细观的尺度上对土样在管涌发生发展的全过程进行了观察和记录,为颗粒流细观模拟提供了必要的细观参数及宏观依据。提出的二维孔隙率与三维孔隙率转换的关系公式很好的将室内模型试验的孔隙率同颗粒流数值模拟结合,运用颗粒流程序采用固液耦合的分析模型对管涌现象作进一步的数值模拟分析。根据模拟结果,分析了管涌产生、发展在颗粒细观尺度的原因,对管涌产生发展中的试样细观变化规律及流速的变化规律进行了分析。这些结果为PFC2D在渗流和渗透破坏等方面的深入研究应用提供了一定的实用依据,同时也为在细观尺度上解释和分析管涌现象提供了一条新的途径。     

保证混凝土结构实体质量措施的探讨

结合国家现行混凝土结构工程验收规范,从混凝土质量及钢筋制作、安装施工质量方面,对混凝土结构实体存在的质量问题作了阐述,提出了相应的解决措施。     

金川软岩蠕变破坏机理电镜实验研究

为探讨金川矿岩石蠕变破坏机理,应用微观扫描电镜(SEM)对蠕变受力情况下岩石破坏断口微观形态进行了观察研究,并分析了其产生的微观破坏机制。结果表明:岩石蠕变断裂的微观机制主要是拉伸、剪切作用下岩石发生脆性断裂,从岩石断裂微观形态研究岩石蠕变断裂,可以更好的揭示岩石断口微观形貌特征、裂纹生核、扩展、及断裂方式与岩石蠕变演进过程的联系。     

桩端土加固处理设计及检测方法的探讨

介绍了人工挖孔桩桩端土承载力不足进行旋喷桩处理的设计过程以及处理后检测过程中遇到的问题。桩端土处理设计可以遵循一般的地基处理设计方法和原则,并针对复合地基承载力检测和桩端土极限端阻力的检测中存在的差异和共同点,提出组合静载荷试验的思路和方法,并在工程中予以实施,并取得了较好的效果。     

应用深层平板载荷试验选择桩端持力层

深层平板载荷试验是一种新兴的原位测试方法。通过安阳某工程人工挖孔扩底灌注桩深层平板载荷试验的现场实践,确定了不同土层地基土的承载力特征值,为设计单位选择持力层提供数据,并为甲方节省了大量建设资金。     

A numerical study on 2-D compressive wave propagation in rock masses with a set of joints along the radial direction normal to the joints

An explosion in a borehole or an accidental explosion in a tunnel will generate a two-dimensional (2-D) compressive wave that travels through the surrounding rock mass. For the problem of 2-D compressive wave propagation in a rock mass with parallel joints in the radial direction normal to the joints, parametric studies on the transmission ratio and the maximum rebound ratio are performed in universal distinct element code. The variation of the transmission ratio with the ratio of joint spacing to wavelength is generalized into a characteristic curve, which can be used as a prediction model for estimating the transmission ratio. The relationship between the maximum rebound ratio and the influence factors is obtained in charts. The charts can be used as a prediction model for estimating the maximum rebound ratio. The proposed prediction models for estimating the transmission ratio and the maximum rebound ratio are applied to a field explosion test, Mandai test in Singapore. The minimum possible values of peak particle velocity (PPV) at the monitoring points are estimated by using the proposed prediction model for estimating the transmission ratio along the radial direction normal to the joints. On the other hand, the maximum possible values of PPV are estimated by using the proposed prediction model for estimating the maximum rebound ratio along the same radial direction. The comparison shows a good agreement between the field-recorded PPVs and the estimated range of PPVs given by the minimum possible PPVs and the maximum possible PPVs at the monitoring points in Mandai test. The good agreement between the estimated and field-recorded values validates the proposed prediction models for estimating peak particle velocity in a rock mass with a set of joints due to application of a compressive wave at the boundary of a tunnel or a borehole.     

New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.