分布式光纤传感技术在滑坡监测中的应用

将分布式光纤传感技术引入滑坡监测,既可得到整个滑坡体的概要特征,又能提高监测效率。FBG与BOTDR是两种最具代表性的分布式光纤传感技术,FBG通过测量其反射光波长的变化获得应变或温度值。BOTDR通过测定后向布里渊散射光的频移实现分布式温度、应变测量。FBG传感器灵敏度高,但只能实现离散点的准分布式测量,BOTDR可实现分布式、长距离、不间断测量,但其空间分辨率不高。笔者提出FBG与BOTDR联合监测滑坡的方案。在巫山残联滑坡,在整个滑坡体上铺设监测光纤,利用BOTDR获得整个滑坡体的概要信息;在滑坡体变形的关键部位———变形缝安装FBG传感器,获得某些关键部位的应变信息,从而实现由点到线再到面的监测,获得滑坡体较完整的应变信息。     

遥感技术在煤炭资源开发状况监督管理中的应用研究

利用高分辨率遥感图象可以快速查明煤炭资源开发状况以及煤炭资源开发的合法性（界内开采、界外开采、越界开采）等,对煤矿安全生产及维护矿业秩序具有重要意义。以我国中部某煤炭开采密集区为试验区,选择不同分辨率的遥感数据,从矿山铺助设施、道路、矿堆、矸石的特征出发,进行矿山开采状况遥感解译;以地理信息系统技术（GIS）为支撑实现采矿权数据、规划数据图层与遥感专题数据的叠加分析和相关分析,判断非法与越界矿山,评价矿产资源开发与保护规划执行情况。     

煤炭采空区处理的新方法与实例分析

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。     

基于GPS技术监测高层建筑物变形的研究

以武汉大学信息学部教学实验大楼为实验对象,分析了大楼在N、E、U方向上的每h变化、d变化及变形规律,阐明GPS技术在高层建筑变形监测中的应用。     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

The role of bathymetry and directional wave conditions on observed crescentic bar dynamics

Nearshore sandbars are important features in the surf zone of many beaches because they strongly influence the mean circulation and evolving morphology. Due to variations in wave conditions, sandbars can experience cross-shore migration and vary in shape from alongshore uniform (shore-parallel) to alongshore rhythmic (crescentic). Sandbar dynamics have been studied extensively, but existing observational studies usually do not quantify the processes leading to crescentic bar formation and straightening. This study analyses the dynamics of crescentic bar events at the fetch-limited beach of Castelldefels (northwestern Mediterranean Sea, Spain) using 7.5 years of hourly time-exposure video images and detailed wave conditions. The results show that, despite the generally calm wave conditions, the sandbars were very dynamic in the cross-shore and longshore directions. They often migrated rapidly offshore during storms (up to 70 m in one day) and more slowly onshore during post-storm conditions. Crescentic bars were often present at the study site (48% of the time), but only when the sandbar was at least 10 m from the shoreline. They displayed a large variability in wavelengths (100–700 m), alongshore migration speeds (0–50 m/day) and cross-shore amplitudes (5–20 m). Wavelengths increased for larger bar–shoreline distances and the alongshore migration speeds were strongly correlated with the alongshore component of the radiation stresses. Crescentic patterns typically developed during low–medium energetic waves with limited obliquity ( $\theta \lesssim 20$° at 10 m depth), while bar straightening occurred during medium–high energetic waves with strong oblique angles of incidence ( $\theta \gtrsim 15$°). Overall, this study provides further proof for the important role of wave direction in crescentic bar dynamics and highlights the strong dependence of crescentic bar development on the initial bathymetric configuration.     

地下连续墙治理地下水污染

介绍一种治理已被严重污染的地下水的方法。即修建一道底部深入到不透水岩层的地下墙,把污染物封闭在由底部不透水岩层和周围地下防渗墙组成的“地下盆”中,降低周围地下水中有害物质的浓度,然后再治理封闭圈内的污染物,以达到彻底根治地下水污染的目的。     

硫铅酸盐“S”型瞬凝水泥干法护壁堵漏技术研究

介绍了硫铝酸盐“Ｓ”型瞬凝水泥干法者漏时使用的配方,阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

土钉墙与预应力锚杆联合支护技术

北京市深基坑工程中土钉墙支护技术应用比较广泛，对于边坡变形要求严格的基坑，采用土钉墙与预应力锚杆联合支护技术可有效控制变形，结合工程实例，介绍了该技术的设计思路及应用过程，说明了该技术的适用性，并就施工中遇到的问题进行分析，给出相应的处理措施。