造山带异源浆混花岗岩理论与方法研究

1：5万花岗岩填图方法在区调工作中推广以来,在造山带花岗岩调查实践中,由于造山作用及过程的复杂性,花岗岩浆的多源及多样性,使同源岩浆演化理论及方法遇到了难题。文章在新一轮1：25万造山带试点图幅,在对同源岩浆演化理论及方法的适用性进行探索的同时,提出了异源浆混理论指导造山带内部浆混花岗岩（H型花岗岩）的填图方法。并就异源浆混花岗岩鉴别标志等作了系统总结,提出了浆混组合、浆混单元、浆混体,填图的理论方法体系;给予了浆混花岗岩明确的定义。     

粤东成矿地质背景及银-铜-铅-锌成矿物质来源探讨

通过对粤东地区地层和岩石中成矿元素含量和区域地质背景的分析,认为粤东地区铜铅-锌-银成矿作用与燕山期的构造-岩浆作用关系密切,成矿物质中银-铜-锌以下地壳来源为主,铅则以上地壳及沉积地层来源为主。     

岩石中的渗透率、流体流动及热液成矿作用

热液成因的固体金属矿床形成过程中都曾拥有一段流动的历史。成矿物质以溶液的形式从矿源地穿过孔隙或断裂达到了现在的栖身之所,在此过程中流体通过的路径决定了它们的走向,而溶液本身也改变了路径的特征。因此,对于此类矿床的研究不能仅仅囿于眼之所见,而应将古流体流动的观念融入其中,并考察它们的跋涉之路。文中总结了近年来国内外在岩石孔隙、断裂介质及与其相关渗透率对热液成矿作用的控制等领域的研究成果和最新进展,对岩石渗透率、渗透率的影响因素、岩石中流体流动的特征等问题进行了阐述,讨论了渗透率对于热液成矿作用深度、成矿规模、矿质沉淀机制等方面的重要影响,藉此在固体金属矿床研究中强化流"体运动"的观念,并促进构造地质学和成矿作用地球化学间一个新研究方向的发展。     

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

膜分离技术的应用及发展趋势

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。     

下庄铀矿田337矿床成矿流体稀土元素示踪

337铀矿床位于下庄矿田东缘,区内发育近EW向、NNE向构造裂隙群及NW向辉绿岩和正长岩脉体,发育以碱性为主的多种围岩蚀变。区内矿床主要赋矿围岩的稀土元素特征属壳源型。矿石内金属矿物以沥青铀矿为主,矿石的LREE/HREE比值为3.25,Sm/Nd比值平均为0.307,Ce/Yb比值为7.127,这些数据都显示出成矿流体具有较深来源。矿石较围岩亏损稀土元素尤其是轻稀土元素,稀土元素分布模式平缓,与幔源辉绿岩特别是与正长岩的稀土元素分布模式相近,负铕异常比围岩更为强烈,反映成矿流体的来源具有幔源性。结合区域地质特征,可以认为337矿床成矿流体来源具有幔源性质。     

藏南地区金和锑矿床(点)类型及其时空分布特征

本文首次对藏南地区金和锑矿床(点)地质特征、成因类型和空间分布特点进行了总结，对金和锑成矿作用与中新生代构造一岩浆活动的关系进行了论证，对区域地壳演化过程中金和锑成矿动力学机制进行了讨论。该区的金和锑矿床(点)可按容矿围岩划分为：①变质岩为主要容矿围岩矿床(点)，包括金和金一锑矿床(点)；②沉积岩为主要容矿围岩矿床(点)，包括金、锑、金一锑和锑多金属矿床(点)；③火山岩为主要容矿围岩矿床(点)，以金一银矿床为代表。根据金和锑矿床(点)空间分布特点和地质特点，将本区划分为4个矿化集中区：拉昂错一马攸木一帕羊金矿化集中区(A)，然勒金和锑矿化集中区(B)，洛扎一措美锑矿化集中区(C)和邛多江金一锑矿化集中区(D)。各矿化集中区内大多数金和锑矿床(点)与燕山晚期～喜马拉雅早期富碱火成岩具密切时空分布关系，它们是古板块对接碰撞期和碰撞期后大规模构造一岩浆活动的产物。近东西向挤压性和南北向张性断裂交汇部位以及富碱火成岩发育区是寻找金和锑矿床(点)的有利场所。