Efficient DEM‐based overland flow routing using integrated recursive algorithms

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

甘肃省第一次全国地理国情普查数据库设计

地理国情普查数据库是地理国情普查成果数据存储、管理和分发应用的基础,为地理国情动态监测提供本底数据库。本文从甘肃省实际情况出发,结合信息化测绘服务体系和"天地图·甘肃"等现有成果,从数据库概念设计、逻辑设计、物理设计、接口设计,以及数据库管理系统和地理国情展示系统等方面进行了详细的设计,为全面开展地理国情普查数据库建设奠定了坚实的基础。     

齐齐哈尔市地理国情分析与表达

以齐齐哈尔市为例,利用地理国情普查数据与统计年鉴数据,构建自然地表指数、地理区位指数、生态覆被指数,对齐齐哈尔市各县、区的地理国情进行综合分析和地图表达。结果表明,齐齐哈尔市的总体条件较好,但区域差异较大,自然地表条件与地理区位条件均以中部的齐齐哈尔市辖区为优,而生态覆被条件则以北部和西部地区为优。     

豫西偃龙煤田深部铝土矿地质特征及矿床成因

偃龙煤田深部铝土矿区位于豫西铝土矿成矿区嵩箕铝土矿成矿小区,是豫西铝土矿成矿区的重要组成部分。区内铝土矿赋存于上石炭统本溪组中上部,下伏具有岩溶特征的寒武—奥陶纪灰岩,沉积相为滨岸泻湖泥岩相区,属海相沉积的一水硬铝石岩溶型矿床,矿体主要填充在岩溶作用形成的负地形之中。本文系统阐述了矿区的含矿岩系、矿床地质及矿石质量特征等,研究了本区铝土矿的成矿地质条件、矿床的展布规律和富集规律,对矿床成因及控矿因素进行了分析,指出铝土矿床分布在坳陷区边部及隆起区的过渡带,铝土矿的厚度和品质与本溪组厚度有着明显的正相关关系,预测深部仍有较好的成矿远景。     

地理国情普查外业调绘核查系统实现

针对传统的基于纸质地图的外业调绘核查工作具有操作复杂、采集数据不精确、作业流程不规范等缺点,该文设计开发了基于iPad的地理国情普查外业调绘核查系统。在内业高精度遥感影像判读的基础上,采用全数字化的外业调绘核查技术,进行地理国情要素移动式、网络化外业调查和验证,快速采集和编辑调查数据,为外业工作提供了一套完整的解决方案。该系统在青岛市崂山区和城阳区的试点中已经得到广泛的应用,较好地验证了移动GIS技术用于外业信息采集的可行性。     

福建政和上山岗金银矿床控矿构造研究

福建政和上山岗金银矿位于政和—大埔深大断裂带东侧的东坑火山盆地中,为受断裂控制的火山-次火山热液型金银矿床。通过对矿区地质构造的研究,认为矿区断裂发育,主要有NE向、NW向、近EW向和近SN向4组,均为控岩-控矿构造,为矿区内重要的找矿标志。其中,NE向和近SN向断裂为主要的控矿和容矿构造,NW向和近EW向断裂为主要的控岩构造,常切割破坏矿体。金银矿体(脉)的产出严格受火山盆地中的断裂控制,与赋矿围岩的具体岩性关系不明显;矿体(脉)的大小与所在断裂的规模密切相关。矿区外围及深部与主干断裂平行的次级断裂可作为矿区进一步找矿的有利构造。     

北大巴山闹阳坪锌萤石矿区断裂特征与找矿预测

闹阳坪锌萤石矿床位于北大巴山逆冲推覆褶皱带平利隆起东侧,为该区首次发现的受构造裂隙控制的气水–热液型锌萤石矿床。本文从矿区断裂入手,通过对该区矿床地质、断裂特征、矿体特征的研究,总结了该区断裂的演化序列及其对成矿的控制机制与规律。认为NW-SE向断裂组是矿区的主要控矿构造,矿区断裂变形发育演化序列为晚印支–早燕山期形成近EW向断裂F1,早燕山期形成NW-SE向断裂F7和NE-SW向断裂F4,随后的右行走滑作用叠加有张扭性应力,形成有利于成矿热液运移充填成矿的张扭性右行走滑断裂。并明确了成矿期应变椭球体,恢复了成矿期主压应力方向为NNW向(340°~350°)。在此基础上,预测平面上闹阳坪矿区F7与F8断裂之间为下一步找矿重点地段,剖面上K3萤石矿体下伏北东方向可能存在隐伏矿体。     

江西省德安县尖峰坡锡矿床成矿地质特征及控矿因素

尖峰坡锡矿位于江西省德安县境内,现经过方圆(德安)矿业投资有限公司历年开采,矿区已知范围内资源保有储量不足,如何解决资源接替、矿山资源枯竭问题已成为首要任务。本文在总结前人工作成果基础上,进一步概括了尖峰坡锡矿成矿地质特征,分析了控矿因素并探讨其成矿模式,指出该矿床的形成是属层控的岩浆期后气化热液后期改造迭加的充填交代型矿床。     

江西瑞昌戏子洞铜多金属矿地质特征与控矿因素

戏子洞铜多金属矿主要产于燕山期花岗闪长斑岩及其接触带附近,赋存于花岗闪长斑岩、矽卡岩内,具有典型岩浆热液矿床成因特点。在详细分析戏子洞铜多金属矿地质特征的基础上,认为矿体主要受花岗闪长斑岩、奥陶系与志留系之间岩性差异界面及北东向层滑断层等因素综合控制。