Mineralogical and chemical transformation of Oldoinyo Lengai natrocarbonatites, Tanzania

The minerals of Oldoinyo Lengai natrocarbonatite lavas are unstable under atmospheric conditions. Subsolidus mineral assemblages in natrocarbonatites were studied in 105 samples from contemporary eruptions ranging from present day to about 100 years old. The subsolidus minerals in natrocarbonatites were formed (i) along cracks on the lava surface from hot gases escaping during cooling, (ii) as atmospheric alteration by solution of water-soluble minerals, in particular halides and gregoryite, and by hydration of nyerereite under the influence of meteoric water and (iii) by reaction with fumarole gases. After solidification, the lavas were cut by a network of thin cracks, the edges of which are covered by polymineralic encrustations. Samples collected 2–24 h after eruption contain nahcolite, trona, sylvite, and halite with accessory kalicinite and villiaumite. Atmospheric humidity results immediately (≥ 2 h after eruption) in alteration of black lavas that is marked by the appearance of white powdery thermonatrite with nahcolite on the lava surface. Subsequent reaction (weeks, months, years) of natrocarbonatite with meteoric water and the atmosphere results in the formation of pirssonite, gaylussite, shortite, trona, thermonatrite, nahcolite and calcite. Generally, the first important step is the formation of pirssonite and the end-members are calcite carbonate rocks or loose aggregates. Fumarolic activity is common for the active northern crater of the volcano. Reaction of hot (54–141 °C) fumarolic gases with natrocarbonatite leads to the formation of sulphur, gypsum, calcite, anhydrite, monohydrocalcite, barite and celestine. Changes in mineralogy of the natrocarbonatite lead to substantial chemical transformation. The most obvious chemical changes in this process are the loss of Na, K, Cl and S, combined with an increase in H₂O, Ca, Sr, Ba, F and Mn. The oxygen and carbon isotopic composition of altered natrocarbonatites shows a significant shift from the primary “Lengai Box” to high values of δ¹⁸O and δ¹³C. Calcite exhibits δ¹³C values between − 2‰ and − 4‰ PDB and δ¹⁸O values of + 23‰ to + 26‰ SMOW. The observed assemblages of secondary minerals formed by reaction with atmosphere and meteoric water, the changes in chemical composition of the natrocarbonatite and field observations suggest that alteration of natrocarbonatite is an open-system low-temperature process. It takes place at temperatures between 8 and 43 °C with the addition of H₂O to the system and the removal of Na, K, Cl and S from the carbonatites. Low-temperature thermodynamic models developed for alkali carbonate systems can be used for the interpretation of Oldoinyo Lengai subsolidus mineralization.     

Preservation/exhumation of ultrahigh-pressure subduction complexes

Ultrahigh-pressure (UHP) metamorphic terranes reflect subduction of continental crust to depths of 90–140 km in Phanerozoic contractional orogens. Rocks are intensely overprinted by lower pressure mineral assemblages; traces of relict UHP phases are preserved only under kinetically inhibiting circumstances. Most UHP complexes present in the upper crust are thin, imbricate sheets consisting chiefly of felsic units ± serpentinites; dense mafic and peridotitic rocks make up less than  10% of each exhumed subduction complex. Roundtrip prograde–retrograde P–T paths are completed in 10–20 Myr, and rates of ascent to mid-crustal levels approximate descent velocities. Late-stage domical uplifts typify many UHP complexes.

Sialic crust may be deeply subducted, reflecting profound underflow of an oceanic plate prior to collisional suturing. Exhumation involves decompression through the P–T stability fields of lower pressure metamorphic facies. Scattered UHP relics are retained in strong, refractory, watertight host minerals (e.g., zircon, pyroxene, garnet) typified by low rates of intracrystalline diffusion. Isolation of such inclusions from the recrystallizing rock matrix impedes back reaction. Thin-aspect ratio, ductile-deformed nappes are formed in the subduction zone; heat is conducted away from UHP complexes as they rise along the subduction channel. The low aggregate density of continental crust is much less than that of the mantle it displaces during underflow; its rapid ascent to mid-crustal levels is driven by buoyancy. Return to shallow levels does not require removal of the overlying mantle wedge. Late-stage underplating, structural contraction, tectonic aneurysms and/or plate shallowing convey mid-crustal UHP décollements surfaceward in domical uplifts where they are exposed by erosion. Unless these situations are mutually satisfied, UHP complexes are completely transformed to low-pressure assemblages, obliterating all evidence of profound subduction.     

Comparative Seismic Risk Studies for German Earthquake Regions on the Basis of the European Macroseismic Scale EMS-98

Within the framework of recent research projects, basic tools for GIS-based seismic risk assessment technologies were developed and applied to the building stock and regional particularities of German earthquake regions. Two study areas are investigated, being comparable by the level of seismic hazard and the hazard-consistent scenario events (related to mean return periods of 475, 2475 and 10000 years). Significant differences exist with respect to the number of inhabitants, the grade and extent of urbanisation, the quality and quantity of building inventory: the case study of Schmölln in Eastern Thuringia seems to be representative for the majority of smaller towns in Germany, the case study of Cologne (Köln) stands for larger cities. Due to the similarities of hazard and scenario intensities, the considerable differences do not only require proper decisions concerning the appropriate methods and acceptable efforts, they enable conclusions about future research strategies and needs for disaster reduction management. Not least important, results can sharpen the focus of public interest. Seismic risk maps are prepared for different scenario intensities recognising the scatter and uncertainties of site-dependent ground motion and also of the applied vulnerability functions. The paper illustrates the impact of model assumptions and the step-wise refinements of input variables like site conditions, building stock or vulnerability functions on the distribution of expected building damage within the study areas. Furthermore, and in contrast to common research strategies, results support the conclusion that in the case of stronger earthquakes the damage will be of higher concentration within smaller cities like Schmölln due to the site-amplification potential and/or the increased vulnerability of the building stock. The extent of damage will be pronounced by the large number of masonry buildings for which lower vulnerability classes have to be assigned. Due to the effect of deep sedimentary layers and the composition of building types, the urban centre of Cologne will be less affected by an earthquake of comparable intensity.     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October     

Groundwater study using remote sensing and geographic information systems (GIS) in the central highlands of Eritrea

Remote sensing, evaluation of digital elevation models (DEM), geographic information systems (GIS) and fieldwork techniques were combined to study the groundwater conditions in Eritrea. Remote sensing data were interpreted to produce lithological and lineament maps. DEM was used for lineament and geomorphologic mapping. Field studies permitted the study of structures and correlated them with lineament interpretations. Hydrogeological setting of springs and wells were investigated in the field, from well logs and pumping test data. All thematic layers were integrated and analysed in a GIS. Results show that groundwater occurrence is controlled by lithology, structures and landforms. Highest yields occur in basaltic rocks and are due to primary and secondary porosities. High yielding wells and springs are often related to large lineaments, lineament intersections and corresponding structural features. In metamorphic and igneous intrusive rocks with rugged landforms, groundwater occurs mainly in drainage channels with valley fill deposits. Zones of very good groundwater potential are characteristic for basaltic layers overlying lateritized crystalline rocks, flat topography with dense lineaments and structurally controlled drainage channels with valley fill deposits. The overall results demonstrate that the use of remote sensing and GIS provide potentially powerful tools to study groundwater resources and design a suitable exploration plan.The online version of the original article can be found at     

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

The political geography of religion: historical state-church relations in Europe and recent challenges

Historical processes of state formation and nation building are crucial for an understanding of the geography of religions and churches in Europe. Each country has developed its own model of state-church relations, giving rise to a ‘bewildering variety’ as Grace Davie aptly remarks. The aim of this paper is to bring some order to this variety by developing a framework for the comparative study of church-state relations based on Stein Rokkan’s famous conceptual map and recent extensions of it to Central and Eastern Europe by John Madeley. According to that framework Europe has been divided into three mono-confessional (Roman Catholic, Lutheran, and Eastern Orthodox) blocs and two multi-confessional culture belts from Northwest to Southeast, and from Northeast to Southeast. This historical pattern has been challenged by secularisation, which started with the Enlightenment and the French Revolution (Western Europe) and the Russian Revolution (Eastern Europe until the velvet revolutions of 1989/1991) and then became widespread after the ‘cultural revolutions’ of the 1960s. A second challenge has to do with globalisation and its consequences, such as massive immigration and the rise of immigrant religions, and in general deterritorialisation, which means the disembeddedness of religion from its national territory. A third challenge concerns reterritorialisation at other (supranational, regional, transnational, and local) scales, of which the new territorial order of the European Union seems to be the most important. Finally, this paper serves as an introduction to the case studies on church-state relations in this special issue.