光学遥感大气订正方法与软件应用分析

本文首先介绍了常见的若干大气订正方法,对于海色遥感,高光谱遥感,机载图像、多角度图像,考虑其特殊性,并介绍了其大气订正的新进展;接着分析了几个当前发行的大气订正软件或者模块;最后,我们提出了大气订正中存在的问题和发展方向。     

从归一化植被指数提取气溶胶光学信息

利用卫星遥感和改进归一化植被指数(NDVI)算法,在最大值合成的MVC-NDVI与监测日NDVI差值中提取气溶胶浑浊度信息,形成新的气溶胶光学指数产品,通过监测珠三角地区细粒子气溶胶扩散过程的验证,表明方法是成功的。基于理论和实例分析,提出气溶胶研究应当从本地区地理环境和气溶胶特征的实际出发,重视细粒子气溶胶作为稳定的胶体系统对空气质量、天气系统和气候变化的影响,重视卫星遥感在气溶胶监测中的不可替代的作用。     

海水浊度测量传感器研究

利用光学散射原理,设计并研制了一种浊度传感器,发射器与接收器成90°,中心波长880 nm,使用Formazine标准液进行标定。通过试验表明,使用此种方法设计的浊度传感器,要准确快速地测量海水浊度。     

模态试验中传感器优化配置的逐步削减法

讨论了模态实验中传感器的配置问题。以模态置信度MAC矩阵的最大非对角元为目标函数,利用逐步削减法得到传感器的配置,并保留结构振型矩阵的QR分解得到的自由度,提出了传感器配置必须结合优化效果和经济性两方面综合考虑。以一座具有74个可测自由度的海洋平台为算例,采用逐步削减法得到了12个最优传感器位置,并与逐步累积法进行了比较。     

Rain properties controlling soil splash detachment

Laboratory experiments have been conducted to study the effects of various rain properties on sand detachment resulting from raindrop impact. Splash cups were exposed to simulated rainfall intensities ranging between 10 and 140 mm h⁻¹. The detached sand was collected and weighed whereas rain intensity, equivalent drop diameter and fall velocity of raindrops were measured with an optical spectro‐pluviometer (OSP). The properties of the simulated rain (i.e. median volume diameter and kinetic energy) were compared with those observed in natural conditions. Statistical analyses have been undertaken in order to evaluate which rain variable best predicts the mass of sand detached. Linear and non‐linear correlations between the mass of detached sediment and the product of drop size (d) by drop velocity (v), i.e. D^αV^β, with values of α varying between 1 and 6 and β between 0 and 3, have been computed. The results indicate that the coefficient of determination (R²) for α ranging between 3 and 5 and β lower or equal to 2 are satisfying. Although kinetic energy (D³V²) described splash detachment relatively well, the product of momentum by drop diameter (D⁴V) was slightly superior in describing splash detachment. Therefore, the momentum multiplied by the drop diameter is recommended as the best rain variable to describe splash detachment. Copyright © 2000 John Wiley & Sons, Ltd.     

近几十年青藏高原与华北地区地表太阳辐射变化特征及其影响因素的对比分析

地表太阳总辐射具有较大的时空变化特征,不同地区的影响因素也存在显著差异。本文利用1961—2016年青藏高原与华北地区的地表太阳总辐射资料,在进行严格的质量控制和均一化处理的基础上,深入分析了两个地区总辐射的年际变化趋势,同时结合云量和气溶胶光学厚度观测资料,探讨了两个地区总辐射变化的影响因素。结果表明:(1)1961—2016年青藏高原和华北地区总辐射总体呈下降趋势,但2008年后青藏高原西部和东部地区总辐射变化趋势相反,而华北地区站点总辐射均呈上升趋势。(2)青藏高原西部地区总辐射的下降主要受到云量变化的影响,而东部地区低云量和气溶胶的下降是总辐射上升的重要原因。(3)在2006—2016年,华北地区总辐射的变化受气溶胶的影响更加显著。     

Determination of gas bubble fractionation rates in the deep ocean by laser Raman spectroscopy

A new deep-sea laser Raman spectrometer (DORISS—Deep Ocean Raman In Situ Spectrometer) is used to observe the preferential dissolution of CO₂ into seawater from a 50%–50% CO₂–N₂ gas mixture in a set of experiments that test a proposed method of CO₂ sequestration in the deep ocean. In a first set of experiments performed at 300 m depth, an open-bottomed 1000 cm³ cube was used to contain the gas mixture; and in a second set of experiments a 2.5 cm³ funnel was used to hold a bubble of the gas mixture in front of the sampling optic. By observing the changing ratios of the CO₂ and N₂ Raman bands we were able to determine the gas flux and the mass transfer coefficient at 300 m depth and compare them to theoretical calculations for air–sea gas exchange. Although each experiment had a different configuration, comparable results were obtained. As expected, the ratio of CO₂ to N₂ drops off at an exponential rate as CO₂ is preferentially dissolved in seawater. In fitting the data with theoretical gas flux calculations, the boundary layer thickness was determined to be  42 μm for the gas cube, and  165 μm for the gas funnel reflecting different boundary layer turbulence. The mass transfer coefficients for CO₂ are k_L = 2.82 × 10^− 5 m/s for the gas cube experiment, and k_L = 7.98 × 10^− 6 m/s for the gas funnel experiment.     

Optimization of structural control via a smart NEURO‐FBG control system

This study improves a NEURO‐FBG active control system to mature the concept of a smart structure. Originally, a system similar to the human brain is created from FBG sensors and neural networks. The system comprises three parts, namely, a structural condition surveillance system, a NEURO‐FBG converter, and a NEURO‐FBG controller. To solve the inherent time‐consuming and reliability problem of the NEURO‐FBG converter, a new technology is first proposed, and the relationship between inter‐story drift and strain data is established. Global indices such as displacement and velocity of the structure are then reconstructed for searching the optimal control force of the actuator. Meanwhile, the soundness of a building with hydraulic actuators is also an important issue to be solved. To make the building sound, the characteristics of earthquakes are considered for enhancing the performance of the NEURO‐FBG controller. Theoretical analysis shows satisfactory improvement to the control efficiency of both displacement and acceleration. To verify the enhanced system, a series of shaking table tests was conducted. Experimental results demonstrated that the new NEURO‐FBG system can effectively manage the structure; and the controller, taking into consideration the ground acceleration effect, is more reliable and robust for practical application than a conventional controller. Copyright © 2007 John Wiley & Sons, Ltd.     

基于D-S理论和神经网络的多传感器信息融合方法

针对自主式移动机器人,以“海福利-IV”机器人为试验平台,提出了基于神经网络和D-S理论相结合的多传感器信息融合方法,较好的解决了复杂背景环境中多传感器信息融合问题,实现了自主式移动机器人稳定的沿固定轨迹寻线并识别标志,并通过实验证明了此方法的有效性.     

Ⅱ类水体光学特性的剖面测量方法

剖面测量方法是国际上推荐测量水体表观光学参数的首选方法，文章在简要介绍剖面测量原理的基础上，根据Ⅱ类水体特点对应用算法进行改进，并给出其应用效果。