粘粒含量对南京粉细砂液化影响的试验研究

南京粉细砂是一种以片状颗粒成分为主的粉细砂，与通常的圆形颗粒石英砂有一定区别，片状颗粒成分使得南京粉细砂具有各向异性的性质。通过对不同粘粒含量的南京粉细砂进行液化试验，分析其试验结果发现：对于粘粒含量ρc＝5％、10％和15％三种情况，在均压固结情况下，当南京粉细砂达到初始液化时，采用变形标准和孔压标准是一致的；而偏压固结时，只能采用变形标准作为南京粉细砂达到初始液化的标准，此时振动孔压仅达到围压的50％-70％。粘粒含量对南京粉细砂的抗液化强度影响很大，随粘粒含量增加，在不同固结比时，其抗液化强度并不是单调变化，而是在粘粒含量ρc＝10％左右处于一个低谷，其抗液化强度最低。     

Consolidation of inelastic clays under rectangular cyclic loading

This paper presents a semi-analytical solution for one dimensional consolidation problem of inelastic clays under cyclic loading considering the effect of the change of the consolidation coefficient of the soil layer. Due to change of the consolidation coefficient, and time-dependant loading, Terzaghi's theory would not be applicable in cyclic conditions. In this research, a method based on the time variable exchange along with the superimposing rule is employed to overcome these shortcomings. Changes in the consolidation coefficient are applied in the solution by modifying the loading and unloading durations introducing a Virtual Time. Based on the superimposing rule a set of continuous static loads in specified times are used instead of the cyclic load in the transformed time space. Each full cycle of loading is replaced by a pair of static loads with different signs. Based on the Terzaghi's theory the pore-water pressure distribution and the degree of consolidation are calculated for each static load and the results are superimposed. A set of laboratory consolidation tests under cyclic load and numerical analysis are performed in order to verify the presented method. The numerical solution and laboratory tests results showed the accuracy of the presented method.     

Design and commissioning of a laminar soil container for use on small shaking tables

This paper describes the design, fabrication and commissioning of a single axis laminar shear box for use in seismic soil–structure interaction studies. A laminar shear box is a flexible container that can be placed on a shaking table to simulate vertical shear-wave propagation during earthquakes through a soil layer of finite thickness. The laminar shear box described in this paper was designed to overcome the base shear limitations of a small shaking table at The University of Western Ontario. The design details of the box are provided in addition to results of dynamic tests performed to commission the box. A synthetic clay comprising sodium bentonite mixed with diluted glycerin was used as the model soil and 1-G similitude theory was employed to maintain model to prototype similarity. The model soil was compacted into the container in lifts to achieve soil stiffness that increased with depth. A series of shaking table tests and numerical analyses that were performed to study the performance of the laminar box and non-linear seismic behavior of the model clay are described. The results of this study show that the laminar box does not impose significant boundary effects and is able to maintain 1-D soil column behavior. In addition, the dynamic behavior of the model clay during scaled model tests was found to be consistent with the behavior measured during cyclic laboratory tests.     

Quartz OSL and TL dating of pottery,burnt clay,and sediment from Beicun archaeological site,China

This study focuses on characterizing the thermoluminescence (TL) and optically stimulated luminescence (OSL) of quartz in burnt clay, pottery, and the sediments unearthed from a Neolithic site, the Beicun site of the Liangzhu culture. It shows that the initial OSL signals (within 0.8 s) of most burnt clay and pottery sherds are not dominated by the fast component. Results of a heating simulation experiment of sediment quartz show that annealing at temperatures exceeding 600–800 °C decreased the proportion of the fast component in the initial signal slightly. In addition, the proportion of the medium component in the later signal (0.8–5 s) increased significantly, resulting in a decrease in the Fast Ratio value. Therefore, high annealing temperature may be an important reason for the slow decay rate of OSL signals of the burnt clay and pottery samples. The D_e(t) plot shows that most of the samples have thermally stable OSL component signals, which have no significant effect on the final OSL ages. The single-aliquot regenerative-dose (SAR) protocol was used to determine the OSL and TL ages for chunk burnt clay and pottery sherds. The high-precision age of the last archaeological heating event, such as sacrifice, burning, or domestic firing, can be obtained by determining the TL and OSL ages of a homogeneous chunk of burnt clay. The OSL results are consistent with the ¹⁴C age of carbon chips extracted from burnt clay. The age of the Beicun site is finally determined to be approximately 5000–5300 BP (BP represents before 2020), belonging to the early period of the Liangzhu culture.     

Crack-filling clays and weathered cracks in the DPRI 1800 m core near the Nojima Fault, Japan: Evidence for deep surface-water circulation near an active fault

Abstract Crack-filling clays and weathered cracks were observed in the Disaster Prevention Research Institute, Kyoto University (DPRI) 1800 m cores drilled from the Nojima Fault Zone, which was activated during the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake). The crack-filling clays consist mainly of unconsolidated fine-grained materials that fill opening cracks with no shear textures. Most of the cracks observed in the DPRI 1800 m cores are yellow-brown to brown in color due to weathering. Powder X-ray diffraction analyses show that the crack-filling clays are composed mainly of clay minerals and carbonates such as siderite and calcite. Given that the top of the borehole is approximately 45 m above sea level, most of the core is far below the stable groundwater table. Hence, it is suggested that the crack-filling clays and weathered cracks in the cores taken at depths of 1800 m were formed by the flow of surface water down to the deep fractured zone of the Nojima Fault Zone during seismic faulting.     

A constitutive law for thermo-plastic behaviour of rocks: an analogy with clays

Thermo-mechanical behaviour of rocks shows phenomenological similarities to that of clays. A visible decrease of strength and an increase in ductility at elevated temperatures are observed in drained conditions. In undrained conditions the strength decrease is even more dramatic and the ductile behaviour may turn into the brittle one, if a sufficient amount of water is present in the pores at the start of the process, or it is being released during heating by the decomposition of hydrous minerals. Applying a thermo-plasticity theory, major macroscopical characteristics of behaviour may be modelled. According to this theory, the elastic domain is postulated as temperature dependent, shrinking with temperature; heating may result in expansive or compactive volumetric irreversible strain depending on the confining stress. This theory is applied to the modelling of heat effects on local changes of permeability around a cylindrical nuclear waste container disposed off in deep clays, and in the numerical simulation of a mechanism initiating deep earthquakes.     

Diffusive mass exchange of non‐reactive substances in dual‐porosity porous systems – column experiments under saturated conditions

Diffusive mass exchange into immobile water regions within heterogeneous porous aquifers influences the fate of solutes. The percentage of immobile water is often unidentified in natural aquifers though. Hence, the mathematical prediction of solute transport in such heterogeneous aquifers remains challenging. The objective of this study was to find a simple analytical model approach that allows quantifying properties of mobile and immobile water regions and the portion of immobile water in a porous system. Therefore, the Single Fissure Dispersion Model (SFDM), which takes into account diffusive mass exchange between mobile and immobile water zones, was applied to model transport in well‐defined saturated dual‐porosity column experiments. Direct and indirect model validation was performed by running experiments at different flow velocities and using conservative tracer with different molecular diffusion coefficients. In another column setup, immobile water regions were randomly distributed to test the model applicability and to determine the portion of immobile water. In all setups, the tracer concentration curves showed differences in normalized maximum peak concentration, tailing and mass recovery according to their diffusion coefficients. These findings were more pronounced at lower flow rates (larger flow times) indicating the dependency of diffusive mass exchange into immobile water regions on tracers' molecular diffusion coefficients. The SFDM simulated all data with high model efficiency. Successful model validation supported the physical meaning of fitted model parameters. This study showed that the SFDM, developed for fissured aquifers, is applicable in porous media and can be used to determine porosity and volume of regions with immobile water. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrologic simulation of clay‐settling areas in the phosphate mining district,Florida

Clay‐settling areas (CSAs) are one of the most conspicuous and development‐limiting landforms remaining after phosphate mining. Many questions are asked by the mining and regulatory communities with regard to the correct modelling (predictive) methods and assumptions that should be used to yield viable hydrologic post‐reclamation landforms within CSAs. Questions as to the correct methodology to use in modelling/predicting long‐term CSA hydrologic performance have historically been difficult to answer because the data and analysis to support popular hypotheses did not exist. The goal of this paper was to substantially improve the data, analysis and predictive methodology necessary to return CSAs to viable hydrologic units, and moreover, to develop better understanding of the hydrology of CSAs and their ability to support wetlands. The study site is located at the Fort Meade Mine in Polk County, Florida. In this paper, continuous model simulation and calibration of study site were conducted for the hydrologic model, Hydrological Simulation Program – FORTRAN, which was generally selected on the basis of its popularity in predicting the hydrologic behaviour of CSAs. The objective of this study was to simulate streamflow discharges and stage to estimate runoff response from these areas on the basis of the observed rainfall within the CSA. A set of global hydrologic parameters was selected and tested during the calibration by the parameter estimation software PEST. A comparison of the simulated and observed flow data indicates that the model calibration adequately reproduces the hydrologic response of the CSAs. The estimated parameters can be used as references for future application of the model. Copyright © 2012 John Wiley & Sons, Ltd.     

砖瓦企业综合利用河道疏浚淤泥研究

介绍了砖瓦企业利用河道疏浚淤泥替代粘土的新思路。通过取样分析和对比研究,证实这是一条值得推广应用的资源循环利用的有效途径。     

地层错动引起的上覆饱和黏土层变形特性的离心试验研究

地震断层错动会引起上覆土层变形,从而造成断层附近的建筑结构、管线产生附加的变形和内力引起破坏。通过一个土工离心机试验分析上覆饱和黏土层在4步连续断层错动作用下的静力响应行为。着重分析断层错动引起的地层变形的范围、不均匀沉降区的分布特点、剪切裂缝在土层传播路径及地表开裂的位置等工程上重点关注的问题。得到以下几点认识：(1) 基岩断层错动引起的地层变形范围基本上不受基岩错动量大小的影响。(2) 断层错动引起地层的不均匀沉降区基本呈三角形分布,其地表宽度约为1倍左右的土层厚度。(3) 基岩错动引起的主剪切裂缝基本沿竖直方向向上传播,其传播距离取决于基岩错动量及土体的破坏应变。(4) 基岩断层错动在主剪区的下盘一侧边缘会产生张拉裂缝,且产生张拉裂缝所需基岩错动量远小于产生剪切裂缝所需的错动量。