冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

插拔桩靴对临近桩靴承载力的影响研究

自升式钻井船桩靴的插拔过程将会对临近井口平台的桩靴基础产生不利影响。开展了室内模型试验研究,将试验结果与理论分析结果相结合,得到了桩靴插拔的影响范围及影响范围内土体强度的变化规律,并推导了桩靴插拔影响区内临近桩靴承载力的计算方法,与模型试验结果进行了对比验证。研究表明,桩靴插拔后砂土相对密实度降低,其降低程度随距桩靴距离的增加而逐渐减小,影响范围约为1倍桩靴直径。受桩靴插拔影响,临近桩靴的承载力下降,降低比例随两桩靴相对间距的增大而减小,随桩靴相对插深的增加而增加。当两桩靴相对间距大于2倍插拔桩靴直径时,可认为桩靴插拔对临近桩靴基础承载力无影响。     

台湾西南海域地震数据处理及天然气水合物地震属性

对台湾西南海域增生楔部位长排列多道地震数据进行地震成像、速度分析、AVO分析、AVO反演处理,获得了天然气水合物多属性地震特征.在偏移剖面上,BSR与海底近似平行,极性与海底相反,穿越沉积层.AVO分析显示,强BSR振幅部位,BSR振幅随偏移距增大而增大.精细速度分析表明强BSR振幅下方存在纵波低速层.对应于强BSR振幅部位,AVO反演的P波、G波为相对高负值区,位于P、G交会图的第三象限,该部位泊松比变化率为负值,横波反射系数接近于零.以上多属性地震特征均预示着该区域可能存在天然气水合物层,且天然气水合物层下方可能存在游离甲烷气层.     

新型复合胶无粘土冲洗液研究及应用

针对松散覆盖层、强风化破碎层取心率低,岩心松散破碎,孔壁稳定性差等问题,进行了以天然植物胶为主原料的处理剂复配改性研究和冲洗液优化配方研究。主要研究方法是通过有机聚合物和无机交联剂的作用,对羟丙基瓜尔胶(GRJ)进行交联改性,以此获得新型复合胶无粘土冲洗液优化配方,并进行了现场应用。应用效果表明,该冲洗液密度低,粘度可调范围大,流变性和润滑性好,成膜护心、护壁作用强,完全满足第四系覆盖层、胶结差的砂卵石层和强风化破碎地层取心钻进要求。     

基于随机集合的非传统型有效波极值模型

The analysis and design of offshore structures necessitates the consideration of wave loads. Realistic modeling of wave loads is particularly important to ensure reliable performance of these structures. Among the available methods for the modeling of the extreme significant wave height on a statistical basis, the peak over threshold method has attracted most attention. This method employs Poisson process to character- ize time-varying properties in the parameters of an extreme value distribution. In this paper, the peak over threshold method is reviewed and extended to account for subjectivity in the modeling. The freedom in selecting the threshold and the time span to separate extremes from the original time series data is incorpo- rated as imprecision in the model. This leads to an extension from random variables to random sets in the probabilistic model for the extreme significant wave height. The extended model is also applied to different periods of the sampled data to evaluate the significance of the climatic conditions on the uncertainties of the parameters.     

旋挖钻进工艺在海相沉积地层中的应用

以潮州电厂基础桩施工为例,对其钻孔设备的特点和施工工艺作了介绍,阐述了旋挖钻机在海相沉积地层中施工灌注桩的工艺方法及其质量控制措施。     

High Frequency Current Fluctuations and Cross-shelf Flows around the Pycnocline near the Shelf Break in the East China Sea

Relation between internal waves with short time scale and density distribution near the shelf break in the East China Sea is studied utilizing moored current meters, thermometers and conductivity-temperature-depth (CTD) casts. A well developed pycnocline was frequently observed around 150–200 m depth near the shelf break accompanied with the development of internal waves with short time scale. During the cruise in May 1998, the intensified internal wave motion with short time scale and the distinct offshore flow were observed just below the lower pycnocline, which shoaled and extended above the shelf area. It is suggested that vertical mixing generated by amplified internal waves would produce cross-shelf ageostophic density current around the pycnocline. During the cruise in May 1999, on the other hand, the lower pycnocline was located offshore below the shelf break, and the internal wave motion was amplified just above the lower pycnocline. In this case, the offshore flow should be generated above the lower pycnocline, but vertical profiles of current velocity were not obtained because acoustic Doppler current profiler (ADCP) data were not available around the lower pycnocline.     

Nautilus矿业公司SMS勘探中采用的取样技术与装备

海底大块状硫化物(SMS)富含铜、锌、铅等金属,特别是富含贵金属金、银,引起了国际采矿业的浓厚兴趣。近年来,以澳大利亚Nautilus矿业公司为先驱代表的国际大型资源开发商和投资商已介入海底多金属硫化物的商业化开采。文中介绍了Nautilus公司在巴布亚新几内亚专属经济区针对海底块状硫化物矿床开展的一系列以商业开采为目的的勘探取样活动,详细介绍了勘探中所采用的基本方法与技术,并重点对其地质调查中所应用的拖网挖掘取样、ROV海底表面取样、大洋钻探船岩芯取样和专门开发的ROV岩芯钻探取样的装备、取样结果及作业效率进行了较为系统全面地介绍。     

调谐质量阻尼器对海洋平台的减振效果分析

目前调谐质量阻尼器(TMD)的研究和设计多数是依据结构的第一阶模态进行的,忽略了TMD对结构其它模态的影响。为了明确TMD是否会对结构的高阶模态造成不利的影响以及影响的程度,论文采用模态分析法将海洋平台-TMD系统进行模态分解,推导出系统各阶模态的状态空间方程。并以一海洋平台为算例,讨论TMD针对结构的某一摸态进行设计时对各阶模态响应的减振效果,仿真的结果表明TMD对设计的模态有较好的减振效果,但对平台的其它模态响应的减振幅度有限,甚至产生不利影响,使某些模态的振动响应增幅较大。     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.