Near-vertical seismic reflection image using a novel acquisition technique across the Vrancea Zone and Foscani Basin, south-eastern Carpathians (Romania)

The DACIA PLAN (Danube and Carpathian Integrated Action on Process in the Lithosphere and Neotectonics) deep seismic sounding survey was performed in August–September 2001 in south-eastern Romania, at the same time as the regional deep refraction seismic survey VRANCEA 2001. The main goal of the experiment was to obtain new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basins developed within and adjacent to the seismically-active Vrancea zone, including the Focsani Basin. The seismic reflection line had a WNW–ESE orientation, running from internal East Carpathians units, across the mountainous south-eastern Carpathians, and the foreland Focsani Basin towards the Danube Delta. There were 131 shot points along the profile, with about 1 km spacing, and data were recorded with stand-alone RefTek-125s (also known as “Texans”), supplied by the University Texas at El Paso and the PASSCAL Institute. The entire line was recorded in three deployments, using about 340 receivers in the first deployment and 640 receivers in each of the other two deployments. The resulting deep seismic reflection stacks, processed to 20 s along the entire profile and to 10 s in the eastern Focsani Basin, are presented here. The regional architecture of the latter, interpreted in the context of abundant independent constraint from exploration seismic and subsurface data, is well imaged. Image quality within and beneath the thrust belt is of much poorer quality. Nevertheless, there is good evidence to suggest that a thick (10 km) sedimentary basin having the structure of a graben and of indeterminate age underlies the westernmost part of the Focsani Basin, in the depth range 10–25 km. Most of the crustal depth seismicity observed in the Vrancea zone (as opposed to the more intense upper mantle seismicity) appears to be associated with this sedimentary basin. The sedimentary successions within this basin and other horizons visible further to the west, beneath the Carpathian nappes, suggest that the geometry of the Neogene and recent uplift observed in the Vrancea zone, likely coupled with contemporaneous rapid subsidence in the foreland, is detached from deeper levels of the crust at about 10 km depth. The Moho lies at a depth of about 40 km along the profile, its poor expression in the reflection stack being strengthened by independent estimates from the refraction data. Given the apparent thickness of the (meta)sedimentary supracrustal units, the crystalline crust beneath this area is quite thin (< 20 km) supporting the hypothesis that there may have been delamination of (lower) continental crust in this area involved in the evolution of the seismic Vrancea zone.     

珠江口盆地白云凹陷新生代构造演化动力学

白云凹陷构造演化史的研究对在白云凹陷开展油气勘探和深水沉积研究具有重要的意义。通过对断裂与沉积结构平面和剖面特点的分析,结合岩浆活动特点,文中提出白云凹陷是一个复式地堑,推测这种结构特点与凹陷下地壳的强烈韧性减薄和颈缩变形有关,表现为热岩石圈的伸展。其发育机制推测与白云凹陷位于构造转换带上有关,特殊的构造位置使白云凹陷成为强烈构造变形区,岩石圈地壳强烈减薄,伴随伸展过程和地幔上涌,脆性地壳或上地幔中部分熔融物质的出现导致岩石圈强度的急剧降低,在区域伸展应力场下以韧性流变方式减薄。岩浆在构造转换带下聚集并发育主岩浆房,由于白云凹陷南北边缘没有发育正断裂系统,岩浆主要沿垂直伸展的方向运移,因此在珠琼运动一幕和二幕南南东向伸展应力作用下,岩浆向白云凹陷的东部和西部运移至北西向基底深大断裂处,那里由于北西向断裂表现为左行张剪性质而成为压力较低的地区,从而成为岩浆上涌和侵位的地方。在岩浆聚集的地区,活动岩浆体附近的脆性变形被分散的韧性变形所取代,因此在凹陷的东北和西南两个角上,发育了张性和张剪性小断裂群,由于热岩石圈弹性较差,白云凹陷长期持续沉降。白云凹陷的断裂活动和沉积演化史还受到南海海盆扩张活动的影响。     

华北地块东部晚中生代至新生代岩石圈不均一减薄与改造模式

本文综合运用不同时代幔源包体平衡温压对比、玄武岩地球化学性质对岩石圈厚度的反演以及不同时代岩石圈地幔地球化学性质的对比的方法，把华北地块东部岩石圈的减薄时间限定在晚中生代至新生代之间。减薄的机制可能是华北东部地区晚白垩世以来大陆岩石圈的拉张作用。由于机械性拉薄和热、机械和化学侵蚀作用，岩石圈厚度最终减薄到70km以下。但古老的岩石圈地幔并没有完全因减薄而消失，残留部分受到了来自软流圈物质的强烈改造，使其Sr、Nd同位素组成类似于软流圈，但Os同位素没有受到明显的改变。改造后的岩石圈地幔成为华北地块东部新生代岩石圈地幔的主体。在时空上，岩石圈的减薄具有不均一的性质。     

The Stonyford Volcanic Complex: a Forearc Seamount in the Northern California Coast Ranges

Jurassic age volcanic rocks of the Stonyford volcanic complex(SFVC) comprise three distinct petrological groups based ontheir whole-rock geochemistry: (1) oceanic tholeiites; (2) transitionalalkali basalts and glasses; (3) high-Al, low-Ti tholeiites.Major and trace element, and Sr–Nd–Pb isotopic dataindicate that the oceanic tholeiites formed as low-degree partialmelts of normal mid-ocean ridge basalt (N-MORB)-source asthenospheresimilar in isotope composition to the East Pacific Rise today;the alkalic lavas were derived from an enriched source similarto that of E-MORB. The high-Al, low-Ti lavas resemble second-stagemelts of a depleted MORB-source asthenosphere that formed bymelting spinel lherzolite at low pressures. Trace element systematicsof the high-Al, low-Ti basalts show the influence of an enrichedcomponent, which overprints generally depleted trace elementcharacteristics. Tectonic discrimination diagrams show thatthe oceanic tholeiite and alkali suites are similar to present-daybasalts generated at mid-oceanic ridges. The high-Al, low-Tisuite resembles primitive arc basalts with an enriched, alkalibasalt-like overprint. Isotopic data show the influence of recycledcomponents in all three suites. The SFVC was constructed ona substrate of normal Coast Range ophiolite in an extensionalforearc setting. The close juxtaposition of the MORB-like olivinetholeiites with alkali and high-Al, low-Ti basalts suggestsderivation from a hybrid mantle source region that includedMORB-source asthenosphere, enriched oceanic asthenosphere, andthe depleted supra-subduction zone mantle wedge. We proposethat the SFVC formed in response to collision of a mid-oceanridge spreading center with the Coast Range ophiolite subductionzone. Formation of a slab window beneath the forearc duringcollision allowed the influx of ridge-derived magmas or themantle source of these magmas. Continued melting of the previouslydepleted mantle wedge above the now defunct subduction zoneproduced strongly depleted high-Al, low-Ti basalts that werepartially fertilized with enriched, alkali basalt-type meltsand slab-derived fluids. KEY WORDS: CRO; oceanic basalts; California     

The variation of crustal stretching and different modes of rifting along the Australian southern continental margin

The southern margin of Australia is a passive continental margin, formed during a Late Jurassic–Cretaceous rifting phase. The development of this passive margin is mainly associated with extensional processes that caused crustal thinning. In this work, we have measured the amount of extension and the stretching factor (β factor) across seven transect profiles approximately evenly distributed across the margin. The obtained results show that the amount of extension and the β factor along the margin vary from west to east. The lowest amount of extension, low–intermediate β factors and a very narrow margin are observed in the western part with 80 km of extension and is underlain mostly by the Archean Yilgarn Craton and the Albany–Fraser Orogen. The Gawler Craton in the centre of the south Australian margin is another region of low extension and low–intermediate β factor. The largest amount of extension (384 km) and the largest β factor (β = 1.88) are found in the eastern part of the passive margin in an area underlain by Phanerozoic Tasman Orogen units. Our results imply that there is a strong control of the age and thickness of the continental lithosphere on the style of rifting along the Australian passive margin. Rifting of old and cold lithosphere results in a narrow passive margin, with the formation of relatively few faults with relatively wide spacing, while rifting of younger, warmer lithosphere leads to wide rifting that is accommodated by a large number of faults with small spacing.     

黑龙江饶河枕状玄武岩地质、地球化学特征及其构造属性

为了确定饶河玄武岩的构造属性,在野外地质观察的基础上,对玄武岩进行岩石学研究和地球化学分析。玄武岩具有典型的枕状构造、淬冷边、中空骸晶和鬣刺结构等特征,反映其形成于海底喷发环境。化学分析样品具有高TiO_2、MgO和低Al_2O_3、CaO、P_2O_5、K_2O等特征,富集大离子亲石元素(Rb、Sr和Ba),微量元素蛛网图呈向上隆起形态,稀土元素配分曲线为右倾型(∑LREE/∑HREE为5.8~6.5),无δEu异常(0.92~0.97),表明样品具有洋岛玄武岩特征。主量和微量元素构造环境判别图指示了样品形成于洋岛或板内环境。样品与亚速尔型和夏威夷型洋岛玄武岩地球化学特征对比,表现出明显的夏威夷型洋岛玄武岩特征。岩石源区分析揭示出岩浆具有地幔热柱起源,并有先期交代地幔熔体的混入,岩浆源区还受壳幔循环的影响。研究表明,饶河枕状玄武岩为夏威夷型洋岛玄武岩,形成于洋壳消减阶段的洋中脊轴外板内喷发环境,为饶河地区存在成熟的洋盆提供直接证据。结合区域研究成果,认为饶河地区经历了古太平洋板块的扩张、洋中脊轴外板内地幔柱上涌、洋壳俯冲消减以及向佳木斯地块仰冲增生的构造演化过程。     

从藏南陆-陆碰撞带深部结构构造演化探讨斑岩铜矿的成岩成矿问题

本文以INDEPTH项目对印度大陆与欧亚大陆碰撞带深部成像结果为基础,从构造演化角度探讨藏南陆-陆碰撞带冈底斯斑岩铜矿带的成矿作用问题。深部探测给出的碰撞带深部结构与侯增谦等地质学家提出的深部结构有较大的异同,如何协调起来以深化对藏南陆-陆碰撞条件下成矿作用的认识,这是本文讨论的中心。藏南碰撞带成矿实际上是在新特提斯大洋岩石圈俯冲形成的冈底斯岩浆弧成矿作用的基础上,再经过陆-陆碰撞挤压强烈改造后的再成矿。碰撞带的深部结构构造演化的特点是:(1)新特提斯大洋岩石圈板块向北连续俯冲了约120 Ma,形成的冈底斯陆缘火山岩浆弧带,这导致了陆缘带地壳增厚并含有大量的地幔岩浆流体物质(如南美安第斯成矿带那样);(2)在印度大陆与冈底斯陆缘弧接近碰撞时,在对挤中新特提斯大洋洋壳与大洋岩石圈地幔发生向上挤出与向下拆沉,并使部分洋壳残片和大洋岩石圈物质保存在中上地壳内;(3)两大陆岩石圈碰撞对接后,印度岩石圈地幔加深达70~80 km并沿地壳底部向北推进,并将加厚地壳内大量的成矿物质、钙碱性岩浆,洋壳及新生的下地壳,以及部分地幔物质从地壳底部将其围限起来,成为后期再成矿的物质基础;(4)查明了碰撞带深部壳/幔间产生了一层中间速度层(相当于MASH层),在中上地壳部位出现一层巨大的部分熔融层;(5)在碰撞挤压下冈底斯带内产生多组断裂构造,大型逆冲断裂系与背冲断裂,并引发了含矿岩浆的再活动,并在浮力(下地壳内)和挤压力作用下多次活动上升生成斑岩型铜矿床;(6)成矿后地表遭受过强烈的风化剥蚀作用,使矿床出露地表。     

内蒙古巴林右旗晚二叠世埃达克质火山岩特征及其地质意义

内蒙古东南部巴林右旗地区发育晚二叠世埃达克质火山岩,岩石组合为安山岩、粗安岩、英安岩及辉石安山岩,其LA-ICP-MS锆石U-Pb测年结果为256.7±2.7Ma,指示其形成于晚二叠世。地球化学特征显示,该套火山岩属准铝质-弱铝质中钾钙碱性岩石系列,具富Si(SiO_256%)、高Al(Al_2O_315%)、富Na、贫K、高Sr、低Yb和Y等特征,Na_2O/K_2O值为2.33~3.90,Mg~#值为35.3~60.8;稀土元素总量为96.69×10~(-6)~192.4×10~(-6)、轻重稀土元素分馏较明显((La/Yb)_N值为6.27~13.82),具正的Eu(δEu=1~1.67)异常,在原始地幔标准化蛛网图中,富集大离子亲石元素Rb、Ba、U,亏损高场强元素Nb、Ta,为O型(大洋型)埃达克质火山岩地球化学特征。综合区域资料,巴林右旗埃达克质火山岩是残留在地幔中的古亚洲洋残余洋壳部分熔融并受到地幔橄榄岩混染形成的,暗示晚二叠世存在古亚洲洋向华北板块俯冲消亡事件。     

Depositional setting,provenance, and tectonic-volcanic setting of Eocene–Recent deep-sea sediments of the oceanic Izu–Bonin forearc,northwest Pacific (IODP Expedition 352)

New biostratigraphical, geochemical, and magnetic evidence is synthesized with IODP Expedition 352 shipboard results to understand the sedimentary and tectono-magmatic development of the Izu–Bonin outer forearc region. The oceanic basement of the Izu–Bonin forearc was created by supra-subduction zone seafloor spreading during early Eocene (c. 50–51 Ma). Seafloor spreading created an irregular seafloor topography on which talus locally accumulated. Oxide-rich sediments accumulated above the igneous basement by mixing of hydrothermal and pelagic sediment. Basaltic volcanism was followed by a hiatus of up to 15 million years as a result of topographic isolation or sediment bypassing. Variably tuffaceous deep-sea sediments were deposited during Oligocene to early Miocene and from mid-Miocene to Pleistocene. The sediments ponded into extensional fault-controlled basins, whereas condensed sediments accumulated on a local basement high. Oligocene nannofossil ooze accumulated together with felsic tuff that was mainly derived from the nearby Izu–Bonin arc. Accumulation of radiolarian-bearing mud, silty clay, and hydrogenous metal oxides beneath the carbonate compensation depth (CCD) characterized the early Miocene, followed by middle Miocene–Pleistocene increased carbonate preservation, deepened CCD and tephra input from both the oceanic Izu–Bonin arc and the continental margin Honshu arc. The Izu–Bonin forearc basement formed in a near-equatorial setting, with late Mesozoic arc remnants to the west. Subduction-initiation magmatism is likely to have taken place near a pre-existing continent–oceanic crust boundary. The Izu–Bonin arc migrated northward and clockwise to collide with Honshu by early Miocene, strongly influencing regional sedimentation.     

阿留申俯冲带几何学特征及运动学成因模式

阿留申俯冲带位于环太平洋俯冲带最北端,是东太平洋型俯冲和西太平洋俯冲的过渡区域。该俯冲带火山岛弧距离海沟的距离从东向西逐渐增大,而形成地球上独特的岛弧火山链与海沟V字型斜交的现象。这一现象的运动学成因目前并没有统一的认识。本文通过对阿留申俯冲带几何形态数据、运动学数据进行整理分析,尝试运用构造赤道理论探讨该现象形成的运动学背景。阿留申俯冲带的几何学数据表明:从俯冲带东段(175°E)至俯冲带西段(155°W),火山岛弧距俯冲海沟的距离从80 km增加至250 km。与此同时,俯冲板片的倾角由60°减小至30°。板块的运动学分析表明:相对北美板块,太平洋板块的东段的运动矢量为48 mm/a,向北运动;逐渐转变为西段的78mm/a,向西北方向运动。相对于软流圈,太平洋板块的运动方向没有改变,始终向西北方向运动,速率向西逐渐增加。因此,在俯冲带的东段太平洋板块的绝对运动方向和相对运动方向存在30°左右的夹角,而这个夹角在西段几乎不存在。太平洋板块的绝对运动方向和相对运动方向之间的夹角不同,会导致软流圈对俯冲板片的反作用力差异,从而形成不同的俯冲角度和俯冲带宽度。太平洋板块相对北美板块和相对地幔的速度方向夹角的变化被认为是引起阿留申火山弧与海沟"V"字型斜交的运动学成因。