Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

内蒙古达茂旗北部奥陶纪花岗岩类特征及其构造意义

研究区奥陶纪花岗岩分布于乌兰布拉格 -哥舍深大断裂 (槽台断裂 )以北 ,岩石类型主要有闪长岩、石英闪长岩、斜长花岗岩和花岗闪长岩。岩石中 Si O2 质量分数为 5 6.76%～ 69.2 4 % ,Al2 O3较高 (多 >1 6% ) ,富 Na2 O贫 K2 O,A/ CNK均 <1 .1 ,为准铝质的钙碱性岩石系列。稀土总量普遍较低 ,为 (63 .4 1～ 1 4 0 .61 )× 1 0 - 6 ,轻重稀土分馏强烈 ,铕异常不明显 (δEu=0 .95～1 .2 2 6)。痕量元素特征与典型的火山弧花岗岩相似。结合区域地质背景 ,认为该套花岗岩类为与洋壳消减有关的岛弧型花岗岩 ,岩浆起源于加厚陆壳的底部。从花岗岩的分布及迁移规律推测 ,华北陆块与其北缘增生带之间的早古生代洋壳可能是由南西向北东的斜向消减     

非开挖导向钻进实际轨迹的控制设计

非开挖导向钻进技术，具有施工速度快、适用范围广等优点，得到了广泛的应用。在实际钻进中，由于钻进在地下的不确定性，影响了导向钻进的顺利进行。到得钻进中当前点的顶角、方位角和孔深，通过均角全距法原理，可以近似地描绘出当前钻孔的空间实际轨迹，并确定钻头的位置。应用这一原理，同时运用VisualBasic语言和AutoCAD绘图工具相结合的方法，编制一套应用程序，可以直接绘制出当前钻孔轨迹，并可实现对钻孔轨迹的调控，从而保证导向钻进的顺利进行。     

硬质合金复合片齿钎具

运用力学原理研制成功了复合片齿钎头和复合片齿整钎，并批量投入市场。该系列钎具凿岩速度、寿命和硬质合金片齿有效利用率均显著优于片状和球齿钎具。     

粤东河源盆地的深部构造、沉积序列与盆地演化

粤东河源盆地是东南沿海规模较大的晚中生代—新生代陆相盆地之一,发育有较为完整的晚白垩世—新近纪地层。研究该盆地的深部构造、控盆断裂、沉积序列和盆地的形成发展,对于认识东南沿海晚中生代—新近纪的大地构造演化有重要意义。通过对野外地质调查、地球物理反射剖面和约两千米的地质科学钻探等数据资料的综合研究,查明了河源盆地为中生代—新生代沉积断陷盆地,地层结构清晰,沉积基底为早古生代地层,并建立了该盆地晚白垩世—新近纪的三阶段沉积序列;该盆地发育渐新世的火山岩,揭示了控盆边界断裂及内部构造发育特征,暗示了原型盆地的破坏发生于晚新生代:即盆地南北两侧紫金—博罗逆冲断层和河源断裂带在晚古近纪—新近纪强烈地改造了原型盆地;基于以上认识,初步恢复了河源盆地的形成演化历史,构建了河源盆地沉积序列-构造演化模式。     

Low-temperature alteration of oceanic island basalts and their contribution to transition metal circulation of the ocean

The major elements, rare earth elements （REE） and trace elements of four basalt samples from central and western Pacific ferro- manganese crust provinces have been analyzed using chemical methods and ICP - MS, respectively. The results indicate that the samples have been extensively altered and that the contents of their major elements have changed significantly. However, the similarity of REE partition patterns and trace element contents of basalt samples to those of fresh oceanic island basalts （OIB） indicate that the basalt samples originated as OIB. Because of low-temperature alteration, the contents of A1203 , Fe203 , MnO, K20 and P205 increased, while MgO and FeO decreased. Active components, such as magnesium and iron, were leached from OIB resulting in the relative enrichment of SiO2. The leaching of active components can cause the relative enrichment of REE, while the precipitation of LREE-rich ferromanganese oxides in vesicles and fissures not only causes an increase of REE contents, but also induces ＂fractionation＂ of LREE and HREE. Based on the enrichment mechanism of REE contents, the theoretical quantities of precipitated ferromanganese oxides and the depleted quantities of active components are calculated ： the depleted quantities of active components for the unit mass of fresh basalts vary in the range of 0.15 ～ 0. 657, and the precipitated quantities of ferromanganese oxides for the unit mass of fresh basahs vary in the range of 0. 006 ～ 0. 042. Of the major elements, the two most depleted are iron, and magnesium, with 18.28% ～ 70.95% of iron and 44.50% ～ 93.94% of magnesium in the fresh basalts was leached out. Theoretical calculation and geochemistry results both indicate that low-temperature alteration of basalts can supply abundant amount of metals to seawater, and may play an important role in ocean metal circulation.     

全水深多波束测深系统Seabeam3012在西太平洋马里亚纳海山区地形测量中的应用

中国科学院海洋研究所在开展西太平洋马里亚纳海山区多学科综合科学考察的过程中,利用"科学"轮船载的全水深多波束测深系统Seabeam3012对多个海山进行了地形测量工作。针对作业过程中遇到的恶劣海况导致采集数据质量差、多波束系统易检测错误海底信息、测线布设难度大等问题,提出了基于船体姿态对数据质量影响分析的多波束测线方向优化、基于地形变化并参考浅地层剖面资料的作业参数优化和基于实时采集情况的多波束采集测线布设优化等一系列措施,有效地提高了海山区多波束数据采集质量,并提高了作业效率。获得的高品质地形数据,为多学科协同研究奠定了基础,为ROV等设备的现场作业提供了安全保障。     

新疆布鲁斯台辉长岩岩石学特征及对南天山洋俯冲时限的制约

布鲁斯台辉长岩位于中天山南缘缝合带中段古洛沟蛇绿岩以北30km,是该带上出露的为数不多的较大的基性侵入岩体。辉长岩主要由斜长石(35%~45%)、单斜辉石(20%~25%)和角闪石(30%~35%)组成,角闪石主要为交代辉石后的产物。岩石化学成分显示,辉长岩具有高Al2O3(15.43%~23.20%)和CaO(12.96%~14.48%),低碱K2O(0.13%~0.19%)、Na2O(1.47%~3.00%)、P2O5(0.03%~0.07%)和TiO2(0.34%~0.61%)的特征。辉长岩稀土元素球粒陨石标准化配分模式与E-MORB相似,但ΣREE低(12.91×10-6~23.14×10-6),微量元素具有Ba、U、K、Sr等LILE富集和Nb、Ta、Zr、Hf、Th等HFSE亏损的特点。锆石原位εHf(t)值为+9.7~+15.0。上述特征反映辉长岩形成的构造背景为活动大陆边缘,源区为受俯冲流体影响的亏损地幔橄榄岩,且在上升的过程中未遭受地壳的明显混染。La、Sm、Yb判别图解显示岩石可能是亏损的尖晶石二辉橄榄岩发生5%~10%的部分熔融的产物。锆石LA-ICP-MS测年表明,辉长岩形成年龄为316.8±2.1Ma(MSWD=3.4,n=36)。结合区域地质、年代学和地球化学的资料,我们提出至少在晚石炭世,南天山洋还存在洋内和洋陆俯冲事件,南天山洋闭合的时间可能在更晚的早二叠世,而不是志留纪或者早泥盆世。     

海水的氯同位素组成特征

本研究采用基于Cs2 Cl+离子的正热电离质谱法测定了海水中的氯同位素组成。结果表明海水的3 7　Cl 3 5Cl值基本上是均一的 ,平均值为 0 .3190 93,变化范围为 0 .318782～ 0 .3192 2 1。相对于某一标准海水的表面海水的δ3 7Cl值与包括海水温度、盐度、经纬度在内的所有因素基本无关。但不同深度的海水的δ3 7Cl值随深度而降低 ;δ3 7Cl值也显然与大陆注入水和区域有关。