低空大比例尺地形图航测生产关键技术

针对传统航空摄影测量生产工艺在生产过程中遇到的影响大比例尺测图精度的问题,该文探讨了低空航测生产大比例尺地形图的关键技术。通过选用宽角相机、低航高飞行、强化影像匹配、野外布设标志控制点、优选平差模型、精化测图操作等改进方式,以提高大比例尺航测精度;组建无人飞艇低空航测系统,对提出的技术方法予以实现;最后给出了山西境内近30个县市建成区1∶500测绘生产实践的部分验证成果。     

“数字城市”建设中的地图综合技术

在“数字城市”建设中,完成了基本比例尺地图数据建库后,面临的紧要问题就是如何维护更新数据,以及建立跨比例尺数据间的联系,数字技术环境下的自动化地图综合技术成为必须解决的技术问题。通过“数字深圳”空间数据基础设施建设实际,讨论了数字环境下地图综合的概念、实施路线及软件开发方法,对多尺度空间数据库建设有关问题进行了思考。     

成渝城市群城市建设用地扩张格局及规模体系分析

基于1990—2018年六期城市建设用地监测数据,本文利用城市用地年面积增长率指数、公共边测度、核密度估计、位序-规模法则等方法,刻画成渝城市群扩张演化特征及其发展规律,并对城市群规模体系进行分析。结果表明:成渝城市群城市建设用地扩张呈先快后慢的趋势,空间上呈"中部高速,南北低速"的特点,建设用地扩张密度高值主要集中在成都、重庆二市且城市群内部连片发展不明显。城市群新增城市用地呈现无序蔓延态势,并未趋于紧凑。2000—2010年,成渝城市群规模分布极化,呈现明显的双核首位特征,2010年后规模分布由非均衡趋于均衡。     

无人机倾斜摄影支持下的1∶500高精度三维测图方案及应用

研发了一种适合于大范围1∶500的无人机测图方案,围绕平面和高程点位中误差在5 cm以内这一核心目标,从无人机的平台稳定性、空中精准定位飞控、空三与三维建模及模型与影像结合的多视角测图等方面进行了设计。在广州马沥村的应用表明,本文研究的无人机倾斜摄影方案可以满足1∶500高精度的三维测图,并具有较高的效率。     

无人机大比例尺测图像控点布设方案设计

随着无人机技术的快速发展,无人机航空摄影测量的精度也大大改善,以无人机为平台低空摄影测量大比例尺地图成为可能。本文以旋翼无人机搭载非测量型相机,通过布设不同数量像控点进行分析和研究,得到无人机摄影测量在农村地区像控点布设规律。结果证明在合理像控点布设的情况下,无人机测图数字成果空中三角测量、平面和高程精度均可满足1∶500、1∶1000、1∶2000大比例尺地形测图的精度要求。     

Crossover from Nonlinearity Controlled to Heterogeneity Controlled Mixing in Two-Phase Porous Media Flows

We use high resolution Monte Carlo simulations to study the dispersive mixing in two-phase, immiscible, porous media flow that results from the interaction of the nonlinearities in the flow equations with geologic heterogeneity. Our numerical experiments show that distinct dispersive regimes occur depending on the relative strength of nonlinearity and heterogeneity. In particular, for a given degree of multiscale heterogeneity, controlled by the Hurst exponent which characterizes the underlying stochastic model for the heterogeneity, linear and nonlinear flows are essentially identical in their degree of dispersion, if the heterogeneity is strong enough. As the heterogeneity weakens, the dispersion rates cross over from those of linear heterogeneous flows to those typical of nonlinear homogeneous flows.     

Accurate real‐time hybrid earthquake simulations on large‐scale MDOF steel structure with nonlinear viscous dampers

This paper presents real‐time hybrid earthquake simulation (RTHS) on a large‐scale steel structure with nonlinear viscous dampers. The test structure includes a three‐story, single‐bay moment‐resisting frame (MRF), a three‐story, single‐bay frame with a nonlinear viscous damper and associated bracing in each story (called damped braced frame (DBF)), and gravity load system with associated seismic mass and gravity loads. To achieve the accurate RTHS results presented in this paper, several factors were considered comprehensively: (1) different arrangements of substructures for the RTHS; (2) dynamic characteristics of the test setup; (3) accurate integration of the equations of motion; (4) continuous movement of the servo‐controlled hydraulic actuators; (5) appropriate feedback signals to control the RTHS; and (6) adaptive compensation for potential control errors. Unlike most previous RTHS studies, where the actuator stroke was used as the feedback to control the RTHS, the present study uses the measured displacements of the experimental substructure as the feedback for the RTHS, to enable accurate displacements to be imposed on the experimental substructure. This improvement in approach was needed because of compliance and other dynamic characteristics of the test setup, which will be present in most large‐scale RTHS. RTHS with ground motions at the design basis earthquake and maximum considered earthquake levels were successfully performed, resulting in significant nonlinear response of the test structure, which makes accurate RTHS more challenging. Two phases of RTHS were conducted: in the first phase, the DBF is the experimental substructure, and in the second phase, the DBF together with the MRF is the experimental substructure. The results from the two phases of RTHS are presented and compared with numerical simulation results. An evaluation of the results shows that the RTHS approach used in this study provides a realistic and accurate simulation of the seismic response of a large‐scale structure with rate‐dependent energy dissipating devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Spatial Breakdown Point of Variogram Estimators

In the context of robust statistics, the breakdown point of an estimator is an important feature of reliability. It measures the highest fraction of contamination in the data that an estimator can support before being destroyed. In geostatistics, variogram estimators are based on measurements taken at various spatial locations. The classical notion of breakdown point needs to be extended to a spatial one, depending on the construction of most unfavorable configurations of perturbation. Explicit upper and lower bounds are available for the spatial breakdown point in the regular unidimensional case. The difficulties arising in the multidimensional case are presented on an easy example in IR² , as well as some simulations on irregular grids. In order to study the global effects of perturbations on variogram estimators, further simulations are carried out on data located on a regular or irregular bidimensional grid. Results show that if variogram estimation is performed with a 50% classical breakdown point scale estimator, the number of initial data likely to be contaminated before destruction of the estimator is roughly 30% on average. Theoretical results confirm the previous statement on data in IR^d , d 1.     

中国宏观经济的国际评价

本文以世界平均水平为参照系，对中国的宏观经济特征进行概括和评价，中国在经济规模上是发展很快的大国，在经济水平上是不断提高的究国，在经济结构上具有相对完整的国民经济体系和工业经济体系，中国宏观经济的主要问题是第三产业和城镇化严重滞后，经济效益相对低下，行为开支比例太高，而科技教育投入明显不足。     

地表非均匀性对区域平均水分通量参数化的影响

次网格尺度地表非均匀性对于网格区平均通量具有重要影响。若将网格区视为均一地表 ,并不能真实描述地 气通量交换过程 ,且可造成很大误差。文中从理论上证明 ,区域平均水分通量的变化率可分解为两部分 :第一部分为区域水分通量的算术平均变化率 ;第二部分为非均匀性所引起的水分通量变化率扰动 ,它与区域内土壤水分空间分布的变差系数有关。数值试验表明 ,地表土壤水分的水平空间变差系数集中反映了区域内土壤水分分布的非均匀程度 ,不同土壤对同样的非均匀程度其敏感性是不同的。变差系数愈大 ,非均匀性愈强 ,在相同的土壤水分平均值下 ,不同土壤类型对地表非均匀程度的敏感性并不相同。例如沙土和粘土受非均匀性的影响就可相差数十倍。