Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

长江口斜压诊断模式三维流场数值模拟

建立了σ坐标系下长江口斜压诊断模式三维流场数学模型,采用k-kl二方程紊流闭合模型求解垂向涡粘系数,计算域内恒定、非均匀盐度场反映了计算域密度斜压效应。验证结果表明,斜压诊断模式的模拟成果较切合实际。模型成功复演了长江口水域由往复流向旋转流过渡的流场特性;潮波从四条汊道传入后在分汊口附近相遇形成多个会潮点,其位置随着径流的大小、潮汐的强弱、汊道的形态等因素而变化。     

峰局五矿下组煤带压开采的可行性与建议

峰局五矿是多年开采的老矿。近些年，随着开采深度的不断增加和开采层次的逐渐下移，来自底部岩溶高承压水的威胁日趋严重，实际生产能力逐年下降。下组煤能否开采是关系到矿井生存与发展的大问题。作者根据多年的研究成果和工作实践，就下组煤带压开采的可行性，谈一些看法和建议。     

锦屏大理岩动态劈裂拉伸破坏及能量演化特征分析

劈裂拉伸破坏是隧洞围岩失稳破坏的主要形式之一。现阶段,在动态劈裂条件下岩石裂纹扩展及对应阶段的能量演化机制鲜有涉及。基于此,采用分离式霍普金森压杆对锦屏大理岩试样进行了不同弹速下的劈裂试验,并借助ANSYS/LS-DYNA有限元软件,模拟试样动态劈裂破坏过程。从试验测试和数值计算角度,重点分析大理岩劈裂过程中的裂纹扩展机制以及能量演化特征。结果表明：在应变率为5～35 s−1时,大理岩的动态拉伸强度与应变率呈线性正相关,同其他地区大理岩相比较,锦屏大理岩的应变率敏感性相对较低;随着弹速的增加,系统内能和动能均增大,在试样破坏的瞬间系统内能降至最低;采用标定的Cowper-Symonds本构模型参数进行数值模拟,所得的试样最终破坏形态与试验观察到的现象基本一致。研究结果可为具体工程应用提供指导和参考。     

A 3D multi-threshold,region-growing algorithm for identifying dust storm features from model simulations

Dust storms cause significant damage to health, property, and the environment worldwide every year. To help mitigate the damage, dust forecast models simulate and predict upcoming dust events, providing valuable information to scientists, decision makers, and the public. These simulation outputs are in four-dimensions (i.e., latitude, longitude, elevation, and time) and represent spatially heterogeneous dust storm features and their evolution over space and time. This research investigates and proposes an automatic multi-threshold, region-growing-based algorithm to identify critical dust storm features from 3D dust storm simulations. A multi-threshold scheme is defined for the identification of dust storm features with different dust concentrations. Based on the multi-thresholds, dust storm features are iteratively identified by developing a region-growing algorithm that splits a clustered dust storm feature into multiple sub-features. The proposed approach is compared with three commonly used methods in image processing and thunderstorm identification. The proposed approach outperforms the other three methods in sensitivity and quantitative/qualitative accuracy. This research approach may also be slightly adjusted to identify critical 3D features from simulation outputs for other severe weather and geographical phenomena.     

Point-block covariance: A general solution for the two-dimensional stationary random functions

The application of the theory of random functions to problems of ore evaluation may involve computations of the covariance between the mean value of a given block and the functional value at a given point. However, an analytical solution for such a covariance does not exist for nonspherical blocks and for commonly applied models of covariance functions. Further, because this covariance is a function of the spatial arrangements of the block and the point, it has to be evaluated numerically each time for given point—block arrangements. This paper presents a readily available general solution to this problem in the form of a series of graduated curves which, together with some geometric manipulations, may be used to compute the covariance between a pointand a two-dimensional block for all possible point—block arrangements. The availability of the graph thus eliminates the necessity of using the time-absorbing programs on computers for such computations. Finally, many of the approximations that are made in order to avoid cumbersome covariance evaluations are no longer necessary due to the ease of such computations with the help of the graph provided.     

Rockburst research at Falconbridge's Strathcona Mine,Sudbury, Canada

Microseismic systems at five mines in the Sudbury Basin provide the basic data for Falconbridge Limited's rockburst research. Daily and long-term analysis of this data as well as underground observations have confirmed the fault-slip mechanism at three mines. A detailed analysis of the complete history of Falconbridge Mine is being conducted and Distinct Element numerical models are being used to simulate both the stick-slip behaviour of faults and the dynamic effects of the induced vibrations on rock and backfill. University research includes acoustic tomographic imaging of the rock mass based on seismic wave propagation and collection of full microseismic waveforms to allow application of advanced seismic and statistical analysis techniques.Formerly with Mines Technical Services, Falconbridge Limited, Sudbury Operations, Falconbridge , Ont., P0M 1S0.Presented at the Fred Leighton Memorial Workshop on Mining Induced Seismicity, Montreal, Canada, August 30, 1987.     

Rock warming and drying under simulated intertidal conditions,part II: weathering and biological influences on evaporative cooling and near‐surface micro‐climatic conditions as an example of biogeomorphic ecosystem engineering

The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.     

The Data Depth-weight-kernel Estimation of the Model Error of Satellite Orbit Determination

It is an objective fact that there exists error in the satellite dynamic model and it will be transferred to satellite orbit determination algorithm, forming a part of the connotative model error. Mixed with the systematic error and random error of the measurements, they form the unitive model error and badly restrict the precision of the orbit determination. We deduce in detail the equations of orbit improvement for a system with dynamic model error, construct the parametric model for the explicit part of the model and nonparametric model for the error that can not be explicitly described. We also construct the partially linear orbit determination model, estimate and fit the model error using a two-stage estimation and a kernel function estimation, and finally make the corresponding compensation in the orbit determination. Beginning from the data depth theory, a data depth weight kernel estimator for model error is proposed for the sake of promoting the steadiness of model error estimation. Simulation experiments of SBSS are performed. The results show clearly that the model error is one of the most important effects that will influence the precision of the orbit determination. The kernel function method can effectively estimate the model error, with the window width as a major restrict parameter. A data depth-weight-kernel estimation, however, can improve largely the robustness of the kernel function and therefore improve the precision of orbit determination.     

地面数字化测图模拟与仿真平台的三维可视化

介绍地面数字化测图模拟与仿真平台三维建模的基本思想,给出了地面数字化测图模拟与仿真平台三维建模过程和建模中相关问题的解决办法,达到了平台在GIS软件中多方位的动态三维可视化效果。