基于性能的碳纤维抗震加固设计

本文探讨了基于性能的加固设计的基本思路和设计过程,并给出了一个基于性能的碳纤维加固设计的工程实例,采用pushover静力推覆分析的方法分析对比了结构加固前后的性能,表明原结构的抗震性能不足,经碳纤维加固后的结构抗震性能明显提高,满足8度抗震设防烈度要求。     

VTI介质中的弹性阻抗与参数提取

弹性阻抗是波阻抗的扩展,可以更好的反映储层和流体性质.常规弹性阻抗方程忽略了各向异性的影响,不能正确地描述各向异性介质中弹性阻抗的性质.本文基于Ruger给出的VTI介质反射系数近似公式,结合Connolly推导弹性阻抗的思想,推导出了一种VTI介质中的弹性阻抗方程.通过引入归一化常数,对方程进行了标准化,消除了方程量纲随角度变化而变化的不足.结合常规弹性阻抗反演的流程,得出了VTI介质中弹性阻抗反演的流程.最后,开展了从VTI介质弹性阻抗数据体中提取岩石物性参数的方法研究.数值测试表明,所讨论的参数提取方法具有一定的理论和应用价值.     

Design of controlled elastic and inelastic structures

One of the founders of structural control theory and its application in civil engineering,Professor Emeritus Tsu T.Soong,envisioned the development of the integral design of structures protected by active control devices.Most of his disciples and colleagues continuously attempted to develop procedures to achieve such integral control.In his recent papers published jointly with some of the authors of this paper,Professor Soong developed design procedures for the entire structure using a design-redesign proce...     

Reply: Bulk sampling of coarse clastic sediments for particle-size analysis

The work of Gale and Hoare (1992) provides a guide to the minimum mass of bulk sample required to obtain a reproducible measure of the complete particle-size distribution of coarse clastic sediments such as till, fluvial gravel and beach gravel. Dunkerley (1994) makes a number of criticisms and misrepresentations of this procedure. These are systematically refuted and corrected here, and further data obtained from till and beach gravel are provided to support the criterion adopted by Gale and Hoare (1992) for sample reliability. The procedure of Gale and Hoare (1992) is confirmed as a practical guide to the mass of bulk sample required to obtain a reliable measure of the particle-size distribution of coarse clastic sediment.     

Location of Tibetan earthquakes──a nonlinear approach by a simplex optimized technique

Ｌｏｃａｔｉｏｎ　ｏｆ　Ｔｉｂｅｔａｎ　ｅａｒｔｈｑｕａｋｅｓ──ａ　ｎｏｎｌｉｎｅａｒ　ａｐｐｒｏａｃｈ　ｂｙ　ａ　ｓｉｍｐｌｅｘ　ｏｐｔｉｍｉｚｅｄ　ｔｅｃｈｎｉｑｕｅ（赵珠）（丁志峰）（易桂喜／）（王建格）ＬｏｃａｔｉｏｎｏｆＴｉｂｅｔａｎｅａ...     

Estimate of fine sediment deposit dynamics over a gravel bar using photography analysis

Three different methods to analyse fine sediment deposits on a gravel bar using pictures are presented in this paper. A manual digitization and deposits zone delineation are performed as well as two different automated procedures. The three methods are applied on aerial pictures taken in 2006 by a drone from a height around 150 m above the study site. Two other sets of pictures taken in 2010 are also studied: the first set was obtained from the left side bank of the river at approximately 15m above the gravel bar whereas the second one was taken from a helicopter flying 600～m above the ground. These methods were used to estimate the surface of fine sediment deposits before and after flushing events. They yield similar results even if the first automated procedure is able to capture smaller patches of fine sediments. The total surface of fine sediment deposits seems to be similar before and after a flushing event, but the distribution appears quite different. Before a flushing event, a significant amount of fine sediment deposits are mixed with coarser sediments. After the flushing event, one can observe more large fine sediment deposits located on the downstream part of the secondary channel and at the channel margin. Most of the small fine sediment deposit patches were washed out. A short discussion is provided on the possible dynamics of fine sediment deposits over the gravel bar.     

A systematic approach to the input determination for neural network rainfall–runoff models

Input determination has a great influence on the performance of artificial neural network (ANN) rainfall–runoff models. To improve the performance of ANN models, a systematic approach to the input determination for ANN models is proposed. In the proposed approach, the irrelevant inputs are removed. Then an adequate ANN model, which only includes highly relevant inputs, is constructed. Unlike the trial‐and‐error procedure, the proposed approach is more systematic and avoids unnecessary trials. To demonstrate the effectiveness of the proposed approach, an application to actual typhoon events is presented. The results show that the proposed ANN model, which is constructed by the proposed approach, has advantages over those obtained by the trial‐and‐error procedure. The proposed ANN model has a simpler architecture, needs less training time, and performs better. The proposed ANN model is recommended as an alternative to existing rainfall–runoff ANN models. Copyright © 2007 John Wiley & Sons, Ltd.     

DEM制作检查及精度问题的解决方法

介绍了通过数字化仪手扶跟踪及扫描仪半自动采集现有地形图等高线的步骤,再通过内插方法生成DEM,并对如何提高DEM精度提出了解决方案。     

Normalization of Hydrodynamic Coefficients in Morison Equation

-The hydrodynamic coefficients C_d and C_m are not only dependent on the size of slender cylin-der,its location in water,KC number and Re number,but also vary with environmental conditions,i.e.,in regular waves or in irregular waves,in pure waves or in wave-current coexisting field.In this paper,thenormalization of hydrodynamic coefficients for various environmental conditions is discussed.When aproper definition of KC number and proper characteristic values of irregular waves are used,a unified re-lationship between C_d,C_m and KC number for regular waves,irregular waves,pure waves and wave-cur-rent coexisting field can be obtained.