Field evidence for normal fault linkage and relay ramp evolution: the Kırkağaç Fault Zone,western Anatolia (Turkey)

Linking of normal faults forms at all scales as a relay ramp during growth stages and represents the most efficient way for faults to lengthen during their progressive formation. Here, I study the linking of normal faulting along the active K?rka?aç Fault Zone within the west Anatolian extensional system to reconstruct fault interaction in time and space using both field- and computer-based data. I find that (i) connecting of the relay zone/ramp occurred with two breaching faults of different generations and that (ii) the propagation was facilitated by the presence of pre-existing structures, inherited from the ?zmir-Bal?kesir transfer zone. Hence, the linkage cannot be compared directly to a simple fault growth model. Therefore, I propose a combined scenario of both hangingwall and footwall fault propagation mechanisms that explain the present-day geometry of the composite fault line. The computer-based analyses show that the approximate slip rate is 0.38 mm/year during the Quaternary, and a NE–SW-directed extension is mainly responsible for the recent faulting along the K?rka?aç Fault Zone. The proposed structural scenario also highlights the active fault termination and should be considered in future seismic hazard assessments for the region that includes densely populated settlements.     

我国地质钻探现状和发展前景分析

我国经济社会发展已步入“新常态”。作为地质调查和矿产勘查工作重要技术支撑的地质钻探行业,资金投入显著减少,地质钻探工作量大幅下滑,常规钻探施工产能过剩;另一方面,地质钻探新的服务领域不断扩大,包括深部科学钻探,地热能及非常规能源勘查,海洋、灾害防治、生态环境、地外天体、极地方面的钻探等。如何应对地勘行业出现的问题,是全行业共同面对的挑战。在对当前及今后一段时期地质钻探工程面临的困难、挑战和机遇等进行调研分析的基础上,对我国地质钻探未来的发展前景进行了预测,认为地质钻探工作量将进一步减少,新领域、新业态的钻探工程及先进钻探技术和装备需求将进一步加大,更加贴近国家需求,更加注重环保理念。     

黔东松桃地区燕山期构造特征研究——以高地超大型锰矿床为例

黔东松桃地区构造格局主要是受到燕山运动影响形成。燕山早期,区内处于SEE—NWW向区域挤压收缩,形成了NNE—SSW向褶皱和断裂。下寒武统杷榔组—变马冲组地层和南华系下统大塘坡组地层作为两套滑脱层,在构造变形过程中起到滑脱作用,滑脱层内褶皱变形强烈,以大量紧闭、顶厚不协调褶皱为主要构造样式,而其上、下岩层则以断块或宽缓褶皱变形为主,以软弱层为界面,其上、下岩层发生逆冲滑脱作用,形成了区内隔槽式褶皱的构造样式。燕山晚期,区内处于NNE—SSW挤压为主,形成了区内NWW向小型褶皱和断裂,同时燕山晚期构造横跨叠加在早期变形之上,导致早期NNE向褶皱枢纽呈波状起伏,轴迹弯曲,部分地区形成了构造穹窿和构造盆地,部分早期断层呈左行走滑性质。在燕山早、晚两期构造作用下,高地矿区含锰岩系作为软弱滑脱层,向猴子坳向斜的核部进行滑脱聚集,使其在向斜的核部富集,翼部相对减薄。同时,由于犁式正断层的存在,也影响了锰矿层的保存与破坏。     

基于庄河市空间大地全面控制网谈似大地水准面的确定及精度分析

介绍了通过布设足够密度且分布均匀的GPS水准联测点,建立庄河市辖区4086 km2的高精度、高分辨率的似大地水准面数学模型的原理和方法.     

基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据,基于一定的判断准则,筛选出质量较高的448个垂向观测数据,采用频域AR方法对0S0模态的特征频率和品质因子进行估值,并以信噪比为权重进行加权平均,得到特征频率f=0.814 658 4±5.3×10-7,品质因子Q=5 586±12。该结果与已有研究成果相比精度更高,有助于约束现有地球介质密度和衰减模型,使其更接近真实地球。     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

一种基于点云法向量的基准特征提取与倾斜分析方法

针对目前将三维激光扫描技术应用于变形监测领域存在基准特征难以提取、点云数据分析缺乏适用的方法等问题,本文提出了一种基于点云法向量的基准特征提取与形变分析方法。首先利用局部平面拟合方法获得点云的法向量,并沿点云法矢方向探测基准点;然后利用三次B样条曲线对探测的正确基准点进行拟合;最后根据拟合曲线计算基准高程和对径点倾斜角分析基准特征形变信息。对某化工厂的罐体点云数据进行基准特征提取结果表明,该方法可以快速、全面地获取监测对象的整体信息,且能够正确分析监测对象的基准形变。     

长春市强冰雪冻害天气系统及物理量特征

应用1971~2000年长春气象站10月至次年3月的逐日降水量、气温资料以及相应的NCEP/NCAR再分析资料,通过对资料的统计分析,给出了确定长春市发生强冰雪冻害天气的标准;根据对36个历史个例的高低空环流形势的分析,建立了4种强冰雪冻害的天气概念模型:冷涡型、深槽型、浅槽型、锋区平直型;进一步分析了长春市冰雪冻害天气的物理量场、要素场的特征。     

"标准正态转换法"用于化探数据特征的"反推"以及系统误差的调平

将水系沉积物样本数据转换到具有岩石样样本数据特征的水平上,近似地称为水系沉积物样品的"反推".文章利用"标准正态转换法"对此作了一些探讨:将两者的样本数据都转换成标准正态分布的形态,在此基础上,再将水系沉积物样本数据转换到岩石样水平.该样本数据的总体特征具有岩石样样本的数据特征.该方法还可以对工作区内不同区块分析数据的系统误差进行调平.并以1∶ 25万四子王旗幅为例说明了该方法在这两方面的应用.     

不同法截面子午线椭球衔接的研究及应用

为了满足高速铁路线路控制网的投影长度变形值不大于10 mm／km的要求,将长线工程线路分成多段并建立各自的法截面子午线椭球．针对相邻法截面子午线椭球的衔接问题,提出交点法线重合的方法,实现椭球变换之后交点位置的一致性,解决线路的衔接问题,从而大大加强法截面子午线椭球理论在工程线路弯曲性、复杂性及长度的适用性．