地磁低点时间与经度的相关性分析

地磁低点时间在空间分布上的主要特征是随着经度变化而变化。为了求出这种变化关系的解析式,首先使用国家地磁台网的数据计算甘肃省近三年13个地磁台站的低点时间序列和低点时间的期望,并绘制了低点时间序列的频次分布图和概率密度曲线;然后对低点时间与台站经度的关系做线性回归,并指出这个线性回归方程应无限趋近于“格林尼治时间-经度”关系式。文章第一次提出台站经度与地磁Z分量低点时间的关系式,并提出它的趋近方程。各台站低点时间的期望就是地磁低点时间的正常背景值,它是判定地磁低点时间异常与否的参考标准。本文的工作完善和发展了丁鉴海先生的地磁低点位移法。     

基于振动台试验的移动通信节点机房蓄电池组地震易损性分析

关键移动通信设备的地震易损性是城市移动通信系统地震灾害预测的基础。本文以移动通信系统节点机房中常用的蓄电池组作为研究对象,通过振动台试验来研究蓄电池组的抗震性能,并获得其地震易损性。试验过程中,首先采用FEMA P695建议的方法从美国PEER强震数据库中遴选出对蓄电池组较为危险的地震动记录作为试验激励,随后逐步增大各条地震动记录的幅值,基于振动台进行增量动力分析。试验后根据蓄电池组的地震损伤特征,定义了其损伤指标和损伤水平,并基于振动台试验数据分析获得了典型蓄电池组的地震易损性曲线。     

机械连接预应力实心方桩承台节点抗震性能试验研究

预应力管桩在高烈度抗震设防地区已禁用,而普通钢筋混凝土方桩成本较高。首先针对卡扣式机械连接预应力混凝土实心方桩、PHC管桩和普通钢筋混凝土方桩与承台处的节点进行拟静力试验,并利用试验数据针对Park-Ang损伤模型进行了修正,进行了损伤指数分析。研究结果表明:预应力方桩比普通钢筋混凝土方桩的抗裂性能明显好,而预应力混凝土实心方桩承台节点耗能能力和延性低于预应力管桩和普通钢筋混凝土方桩;截桩施工导致桩端部损失部分预应力,相比较未截桩试件屈服荷载和极限荷载均减小,节点裂缝开展较早,损伤较未截桩试件严重;增配普通钢筋试件的滞回曲线比较饱满,水平承载能力和位移延性得到提升,节点抗震性能得到提升与改善;预应力混凝土实心方桩损伤前期较小,而一旦发生损伤后,损伤指数发展较快。     

地理信息标准化实现机制之一:一致性测试

一致性测试作为一种标准化检测手段和评价方法,目前已应用于信息技术、工业自动化系统与集成等多种领域,但在国内地理信息领域,一致性测试尚处于待开展状态,本文对地理信息一致性测试机制中所涉及的主要概念、对象、过程、方法进行了综述,旨在促进国内地理信息领域一致性测试机制的建立和发展。     

基于三维激光扫描的堆积体滑坡变形机理及阈值模型试验研究

为分析白龙江流域舟曲段江顶崖滑坡的变形演化机理及其阈值,设计降雨条件下的大型堆积体滑坡物理模型试验,采用FARO FocusS 350三维激光扫描仪进行滑坡数据采集、处理,获取滑坡在不同降雨工况的点云模型数据,对比分析不同降雨工况下滑坡宏观及局部特征点的变化情况。研究表明：滑坡模型表面出现持续、快速、变化鲜明的整体变形特征,伴随出现滑坡模型中、前部横向、纵向的张拉裂缝,表明在非饱和渗流影响下,堆积体滑坡模型的基质吸力降低、孔隙水压力以及滑坡体重力荷载增加,导致滑坡模型临近失稳;根据滑坡模型宏观变形情况,其变形演化过程可划分为：初始变形阶段、等速变形阶段和加速变形阶段,3个不同变形阶段坡体宏观变形各自有其特点。通过对试验阶段的变形特征分析,设立了滑坡变形速率阈值,分别为0.01 m/h、0.02 m/h、0.2 m/h。基于三维激光扫描技术坡体监测,结合坡体变形宏观和局部分析的优势,在保证高精度监测、采集、处理的同时,得到坡体的整体变形和位移。     

Dynamic testing and system identification of a multi-span highway bridge

A simple and effective procedure for conducting the free vibration test on highway bridges is presented. The impulsive force in each direction is generated by a loaded truck that either stops suddenly or falls down from a rigid block. The feasibility of the procedure is demonstrated in identification of the dynamic properties, i.e. the vibration frequencies, mode shapes, and damping ratios, of a three-span box-girder concrete bridge using the Ibrahim Time-Domain (ITD) technique. Up to 14 modes have been identified for the present case. For the purpose of verification, ambient vibration tests were also carried out, with the data processed by the random decrement (Randomdec) technique to yield the free vibration response, followed by the ITD technique. The dynamic properties identified from the two types of test correlate very well with each other, indicating the validity of each procedure described herein. Although many more modes can be identified from the free vibration test because of the higher quality of data produced, the easiness and general applicability of the ambient vibration test can still be appreciated. A comparison of the experimental results with those by the finite element method indicated a lesser degree of correlation, implying that the finite element model adopted in design requires further refinement, say, through a more realistic evaluation of the boundary conditions, geometric and material properties of the bridge. Copyright © 1999 John Wiley & Sons Ltd.     

Real-time on-line test for MDOF systems

This paper presents a test system for conducting on-line tests in a real time and a series of real-time on-line tests conducted to verify the effectiveness of the system. The proposed system is characterized by (1) use of a Digital Signal Processor (DSP) now readily available, (2) adoption of the C language to ensure easy programming, and (3) separation of response analysis and displacement signal generation to apply the system for tests with complex structures. To create displacement signals successively without being interrupted by the computation of equations of motion, extrapolation and interpolation procedures using present and past target displacements are developed. Base-isolated building models were chosen for the real-time on-line test. The effectiveness of the extrapolation and interpolation procedures was demonstrated through a series of real-time on-line tests applied to the models treated as SDOF structures. A five-storey base-isolated building model (treated as a six DOF structure) was tested for various ground motions, and it was verified that the system is able to simulate earthquake responses involving large displacements and large velocities. The number of DOFs that can be handled in the proposed system was investigated, and it was found that the system is capable of performing the test with reasonable accuracy for up to 10 DOF structures with a range of response frequency not greater than 3·0 Hz, or 12 DOF structures with a range of response frequency not greater than 2·0 Hz. Copyright © 1999 John Wiley & Sons, Ltd.     

Disturbed state model for sand–geosynthetic interfaces and application to pull-out tests

Successful numerical simulation of geosynthetic-reinforced earth structures depends on selecting proper constitutive models for soils, geosynthetics and soil–geosynthetic interfaces. Many constitutive models are available for modelling soils and geosynthetics. However, constitutive models for soil–geosynthetic interfaces which can capture most of the important characteristics of interface response are not readily available. In this paper, an elasto-plastic constitutive model based on the disturbed state concept (DSC) for geosynthetic–soil interfaces has been presented. The proposed model is capable of capturing most of the important characteristics of interface response, such as dilation, hardening and softening. The behaviour of interfaces under the direct shear test has been predicted by the model. The present model has been implemented in the finite element procedure in association with the thin-layer element. Five pull-out tests with two different geogrids have been simulated numerically using FEM. For the calibration of the constitutive models used in FEM, the standard laboratory tests used are: (1) triaxial tests for the sand, (2) direct shear tests for the interfaces and (3) axial tension tests for the geogrids. The results of the finite element simulations of pull-out tests agree well with the test data. The proposed model can be used for the stress-deformation study of geosynthetic-reinforced embankments through numerical simulation. Copyright © 1999 John Wiley & Sons, Ltd.     

气象中使用统计检验的几个问题

针对目前在气象和气候要素变化分析中,对相关系数和合成分析使用统计检验存在的若干问题进行评论。认为对相关系数等统计检验,不应该称为“信度检验”,其检验水平也不应该称为“95％置信度”,而应该称为“显性检验”,“显性水平为5％”。     

CINRAD/CB脉冲多普勒天气雷达数字中频接收机

介绍CINRAD/CB脉冲多普勒天气雷达数字中频接收机的主要功能和技术性能.CINRAD/CB雷达接收机的主要特点是高灵敏、采用了数字中频采样、带AGC的大动态接收范围、低相噪频率综合器、在线测试、系统在线定标和整机性能的测量等技术,采用了高稳定频率源和全相干技术体制.简述了CINRAD/CB雷达接收机的组成和工作原理,给出接收系统的组成框图,对该系统接收机的灵敏度、噪声系数、动态范围等性能指标进行了分析.