Pilot‐Scale Degradation of Organic Contaminants in a Continuous‐flow Reactor by the Helielectro‐Fenton Method

The feasibility of pilot‐scale mineralization of organic pollutants in wastewaters using the Electro‐Fenton® process is demonstrated. The treatment was applied in a continuous‐flow reactor, to solutions of nitrobenzene, 2,4‐D and benzoic acid and to actual wastewaters from a fine chemicals company along with a pulp and paper company. The results showed mineralization yields from 60 to 84% by simply applying the Electro‐Fenton® process. When a subsequent exposure to sunlight was carried out (Helielectro‐Fenton method), this mineralization almost went to completion, except for the effluent from the fine chemicals industry.     

Optimization of a Photo‐assisted Fenton Oxidation Process: A Statistical Model for MDF Effluent Treatment

In the present study, the effects of initial COD (chemical oxygen demand), initial pH, Fe²⁺/H₂O₂ molar ratio and UV contact time on COD removal from medium density fiberboard (MDF) wastewater using photo‐assisted Fenton oxidation treatment were investigated. In order to optimize the removal efficiency, batch operations were carried out. The influence of the aforementioned parameters on COD removal efficiency was studied using response surface methodology (RSM). The optimal conditions for maximum COD removal efficiency from MDF wastewater under experimental conditions were obtained at initial COD of 4000 mg/L, Fe²⁺/H₂O₂ molar ratio of 0.11, initial solution pH of 6.5 and UV contact time of 70 min. The obtained results for maximum COD removal efficiency of 96% revealed that photo‐assisted Fenton oxidation is very effective for treating MDF wastewater.     

非线性广义文克尔模型探讨

文克尔地基模型的最大缺陷是没有考虑地基土的非线性和连续性。利夫金模型虽然对其连续性进行了改进,但过分考虑了基础形状对基床系数的影响,还导致了在矩形基础长短边方向上基床系数的极不对称。为此提出非线性广义文克尔模型,对文克尔模型特征函数重新进行了定义,修正了利夫金模型的缺点,在合理考虑基础形状和尺寸对地基刚度影响的同时,还能分别模拟几种典型情况的反力分布形式。非线性广义文克尔模型还通过分段线性逼近实际p-s曲线的方法,考虑了地基土的非线性。算例分析表明,非线性广义文克尔模型具有一定的合理性和实用性。     

花岗岩研究的反思

花岗岩是地壳生长、发展以及再循环的地质见证,是地质科学中壳–幔相互作用研究的一个重要课题,同时也是流体与固体地球化学相互作用领域的研究前沿。近二百年来,有关花岗岩的研究经久不衰,大致可分为4个阶段。（1）混合花岗岩派与岩浆花岗岩派的论争,代表花岗岩成因研究开始进入理性认识阶段。一派以变质作用条件下地壳重熔的地质观察为基础,另一派以简单的玄武岩浆分异为依据,而展开论争。（2）地壳重熔实验阶段。以地壳岩石为源岩的热力学实验的开展,是花岗岩热力学研究的开始。（3）随着重熔实验的全面开展,包括了微量元素及同位素的研究,促使热力学熔融体系在花岗岩成因研究上进入全面应用阶段,使地质上的共生组合法则得以与热力学接轨。同时由于微量元素应用于花岗岩,它的多元机理（multiple stage mechanism）进一步确立,为动态研究的开展打下了一定的基础。（4）花岗岩成因与大地构造结合阶段,属于近代花岗岩研究的范畴,代表着花岗岩体系与动态地质演化过程的接轨,并开始建立一个地质实际的观察模式,为进一步向动力理论发展做好准备。为此,对花岗岩研究发展过程中出现的几个问题,如平衡热力学的应用,流体在花岗岩中的重要性,花岗岩成因与大地构造的结合以及热在长期的演化过程中的变化等问题进行了讨论。     

Fenton氧化膜-生物反应器出水中丙烯腈的实验研究

采用膜-生物反应器和Fenton氧化组合工艺对丙烯腈废水进行处理。从GC/MS测量结果来看,膜-生物反应器出水中主要物质为2,6双（二甲基-乙基）-4-酚、苯二甲酸和硝基苯二甲酸,均为生物难降解有机物,使出水不能达标。后续Fenton氧化工艺处理膜生物反应器出水,可以使COD含量等指标达到所要求的排放标准。经过膜-生物处理与Fenton法结合的优化工艺,COD去除率达到80%~88%,去除率达到98%,出水水质可达排放标准。Fenton氧化工艺的最佳工艺条件为：pH值为3.4,硫酸亚铁的投加量为700mg/L,双氧水的投加量为600mg/L。     

α-1,4-葡聚糖裂解酶的动力学性质研究

红藻中的α-1,4-葡聚糖裂解酶是红藻淀粉的降解酶,除了 红藻淀粉外,它还可以作用于多种底物。文中分别以PNPG和可溶性淀粉作底物,以龙须菜的 几个品系作为材料,研究了该酶促反应的动力学方面的性质。以 PNPG作为底物,该酶在60m in内酶促反应速度与保温时间成线性关系;在野生型龙须菜品系中该酶的最适反应温度是50 ℃,在两种突变型品系中是40℃;最适pH范围在4.4～5.5;底物浓度是4mmol/L时达到最大反 应速度;葡萄糖对该酶促反应有明显的抑制作用。以可溶性淀粉作为底物,在反应60 min内 酶反应速度与保温时间成线性关系;最适反应温度为50℃;最适pH范围在5.0～5.8;底物浓 度是8mg/mL时达到最大反应速度;葡萄糖对可溶性淀粉的抑制作用比对PNPG的弱。     

Ultrasonic-assisted condensation of chitosan with salicylaldehyde

In order to synthesize an improved adsorbent for heavy metal ions, we studied the condensation reaction of chitosan with salicylaldehyde in ethanol to form a Schiff base. The effect irradiating the reaction using an ultrasonic liquid processor was contrasted with conventional methods. The IR spectra of condensed chitosan prepared by the two methods showed that their molecular structures were identical. The reaction conditions, including solvents, ultrasonic power density and irradiation time, pH, and reactant ratio, were optimized by orthogonal design. A shorter reaction time and a higher product yield were obtained using ultrasonic-assisted synthesis compared with the traditional method. A condensation degree of 89.63% was achieved using the optimized conditions: i.e. ultrasonic irradiation at 180 W for 60 min; 95% ethanol as the solvent, pH 4.0, and salicylaldehyde:chitosan ratio of 6:1.     

MCM-41/β介孔—微孔复合分子筛的合成、表征及催化性能

以β分子筛为前驱体,水玻璃和硫酸铝为外加硅铝源,采用二元混合表面活性剂为结构导向剂,水热晶化合成MCM-41/β介孔—微孔复合分子筛,并利用XRD、SEM、TEM、N2吸附—脱附和Py-IR等对复合分子筛进行表征,以十氢萘为模型化合物考察复合样品的催化裂解反应性能.结果表明:MCM-41/β介孔—微孔复合分子筛中存在MCM-41分子筛六方介孔结构和β分子筛微孔结构,对十氢萘具有较强的催化反应活性,催化裂解转化率为93.16%.     

Predicting size effect on diffusion-limited current density of oxygen reduction by copper wire

The size effect of copper wire radius (0.04–0.82 mm) on the diffusion-limited current density of an oxygen reduction reaction in stagnant simulated seawater (naturally aerated 0.5 mol/L NaCl) is investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) and compared with the results obtained in 0.5 mol/L H2SO4. In the oxygen diffusion-limited range, size effect is found to occur independent of electrolytes, which is attributed to non-linear diffusion. Additionally, to sati...     

纳米镍/铁去除氯代烃影响因素的探讨

氯代烃是地下水中最常检出的有机污染物之一,传统的处理方法去除率很低。近年来随着铁还原技术的发展,纳米铁和纳米双金属也成为一个活跃的研究领域。利用批实验的研究方法以四氯乙烯(PCE)和四氯化碳(CT)为目标污染物,研究纳米镍/铁在去除PCE过程中的影响因素。实验结果表明,在碱性条件下,纳米Ni/Fe对PCE脱氯速率比在酸性和中性条件下脱氯速率更快;纳米Ni/Fe对初始浓度为6·51mg/L的PCE溶液脱氯速率是对初始浓度为20·56mg/L的PCE溶液脱氯速率的1·8倍;对于氯代程度相同的CT和PCE,对CT的脱氯速率明显快于对PCE。