Efficiency analysis of open trench for impact pile driving through a single-variable method

Abstract

The ground vibrations during pile driving operation have a drastic potential to undermine the surrounding structures both in land and reclaimed land. Particularly, reclaimed land necessitates ample application of pile driving due to the weak land condition. To prevent the structural damage, attenuation of the ground vibrations to an allowable level through active isolation of circular open trench is the scope of this study. In this research, finite element simulations of continuous impact pile driving process from the ground surface was executed with particular attention to the pile-soil interaction, and thereby, the efficiency of open trench application in attenuation of the unsafe distance of different structures was surveyed using the vibration sensitivity degree. Regarding the crucial parameters of an open trench (depth, width, and location), it was concluded that a sufficient high depth can attenuate the unsafe distance up to 68%, the trench width variations are less effective, and an average pile-trench distance is the most efficient option. The excavation volume was also concluded as another crucial parameter in open trench design which takes all three parameters into account. The trench depth equal to the pile’s maximum critical depth of vibration was inferred for an optimum design.     

固定式海洋平台利用TLD的减震研究

本文研究固定式海洋平台利用调谐液体阻尼器（ＴｕｎｅｄＬｉｑｕｉｄＤａｍｐｅｒ，简称ＴＬＤ）减小地震反应的方法。首先探讨了调谐频率比、激磁频率比对减震效果的影响，在此基础上建立了ＴＬＤ——平台系统的力学模型和运动方程，通过数值计算验证了该方法的有效性     

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.     

Neural Network-Based Active Control for Offshore Platforms

1 .IntroductionWiththedevelopmentofoceantechnology ,moreandmoreextremelylargeandlongflexibleoff shoreplatformsusedforoilexplorationanddrillingoperationarebuiltinhostileoceanenvironments .Ingeneral,thiskindofplatformsisanonlineardistributedparametersystemanditsnaturalfrequencyfallsclosertothedominantwavefrequencieswiththeincreaseofwaterdepth .Besides ,itsstructureisverycomplexandtheexternalwaveforceontheplatformisuncertain .Thus ,theseplatformsarepronetoexcessivewave inducedoscillationsunderbot…     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.     

高速摄影对散体振动的研究

以现代高速摄影技术和图像分析以及数据处理方法，针对高效振动磨机中弹性散体工质（如钢棒、球体等）的振动力学进行了深入的探讨和分析，为研究散体动力学和振动超细粉碎过程中的能量分布和传递规律以及能量与物质的相互转换机理奠定了基础，也为相关学科的发展提供了一种可以借鉴的方法。     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

Inertial and hydrodynamic inertial loads on floating units

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.