不同固有频率比条件下圆柱双自由度涡激振动特性的数值研究

采用RANS方法,结合SST k-ω湍流模型,对不同顺流向与横顺流向固有频率的比值(即固有频率比,fnx/fny)条件下低质量比圆柱体的双自由度涡激振动进行了二维数值模拟。圆柱体的质量比为2.6,雷诺数范围为2 500~18 750,相应的约化速度范围为2~15,包括了经典试验中出现的整个锁定范围。通过研究发现,固有频率比是影响振动特性的重要参数,随着固有频率比的增加,响应幅值逐渐降低且向更高的约化速度偏移;在低约化速度范围内,固有频率比对顺流向和横流向振动之间的相位差以及升力频率有较大影响,从而得到各种不同偏向的8字形轨迹;最后对不同固有频率比条件下的尾涡模式进行了讨论,给出了对应不同约化速度时的尾涡模式。     

1988—2015年马六甲海峡岸线时空变化特征分析

基于Landsat遥感影像,建立1988年、2000年和2015年3个时期马六甲海峡两侧的岸线数据,并从岸线结构、岸线变化速率、海陆格局和岸线开发利用强度等方面分析1988—2000年、2000—2015年和1988—2015年不同时段区域陆体以及槟城港等12个主要港口区域的岸线时空变化特征。结果如下:岸线结构变化显著,人工岸线长度和比例急剧增加,港口区域逐渐从单一类型主导向多元结构转变;除个别港口外,两侧岸线均呈向海扩张状态,南北两岸的岸线平均变化速率分别为0.91m/a和1.20m/a;因海峡南岸沼泽广布、地势低平及海平面上升等原因,其岸线稳定性差于海峡北岸;岸线开发利用强度持续增强,并表现出明显的海峡北岸强于南岸的空间差异,以及北岸第一阶段增长快于第二阶段,南岸第一阶段增长慢于第二阶段的时间差异。马六甲海峡的交通运输功能是两岸岸线变化的主要驱动因素。本研究对认识马六甲海峡两岸及港口区域岸线的时空变化和发展特征有重要意义,对海峡及港口岸线的综合管理具有一定借鉴作用。     

无居民海岛前大连岛的原自然海岸特征

确定自然海岸特征是海岸修复中的重要内容,但是在开发后弃管的无居民海岛却面临缺少历史资料参考的困难。在大连普兰店湾中部前大连岛的研究证明,依据历史影像和现存海岸地质地貌情况可以分析确定原自然海岸位置及性质。1972年KH 卫星影像表明当时的前大连岛仍然保持自然海岸形态,海岸位置在2020年海岸后 方的岛屿陆域内部。结合2020年海岸地质考察结果可以进一步确定1972年的前大连岛东部、西部分布海蚀崖形式的基岩海岸,南部、北部则分布砾石质海岸。1972—2020年,前大连岛自然海岸全部变化为人工海岸,海岸长度也从约2.38 km 增加至约3.12 km。     

日照市土壤地球化学元素分布规律及成因探讨

在日照市开展多目标区域地球化学调查,获取了表层土壤和深层土壤地球化学数据,通过对获得的地球化学参数进行统计分析,确定了日照市土壤地球化学基准值和背景值,认为日照市除部分元素或指标外,大部分元素或指标土壤地球化学基准值和背景值与全省土壤地球化学基准值和背景值接近。研究发现,日照市As,Cd,Cr,Cu,Hg,Ni,Pb,Zn等8种重金属元素背景值含量低于国家土壤环境质量标准的土壤一级标准限值,日照市土壤质量基本保持自然背景水平;而受工业化生产和城市化建设等后期人为活动影响,日照市表层土壤中Cd,C,Hg,N,P,S,Se,Corg等元素或指标出现明显富集,应引起重视。     

虾夷扇贝天然苗种筛选装置的研究与应用

随着贝类底播增养殖产业的迅猛发展,为保证底播贝苗的成活率,养殖企业对天然苗种更加重视。天然苗种采用中间育成方法,需要对苗种进行筛选作业,但目前筛选作业仍以人工作业为主,存在作业效率低、劳动强度大等问题。作者通过对大连地区虾夷扇贝(Patinopecten yessoensis)天然苗种筛选作业调研的基础上,设计了满足生产实际需求的扇贝苗种筛选装置,可实现3种规格贝苗的筛选作业。试验分2阶段进行,第1阶段对影响筛选准确性的因素进行正交分析于验证,确定了最佳工艺参数;第2阶段在大连旅顺进行的生产性对比试验得出,机械筛选的平均准确率为91.33%,误差率低于10%,且5组筛选结果无显著性差异(P0.05);同时机械筛选的平均作业效率为80g/(人/min),约为人工筛选作业效率的8倍。由此说明扇贝苗种筛选装置具有较高的准确性、稳定性和高效性,具有推广应用价值。     

遥感影像分析在新增建设用地督察中的应用

以卫星影像大数据和时空数据挖掘技术为基础,采用深度学习框架支撑,构建了面向新增建设用地遥感监测应用需求的深度学习训练平台,可智能发现自然资源督察线索,全面提高自然资源督察问题的发现能力.该技术可广泛服务于大范围、高频次的督察工作,为督察工作提供更及时客观全面的信息基础和保障.     

基于径流还现的洮河流域径流变化特征研究

河川径流还现计算是准确反映区域水资源状况的基础,同时也是水资源规划和决策的重要依据.选取甘肃省洮河流域李家村、红旗2个代表水文站长系列径流资料作为基础数据,在还原计算的础上,对洮河流域径流进行还现计算,同时对径流变化特征进行研究.结果 表明:1956—2016年洮河流域李家村、红旗多年平均实测径流量分别为39.52×1...     

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.     

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.     

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.