天然气水合物的声学探测模拟实验

在人工岩心中进行天然气水合物的生成和分解实验,同时获取了体系的温度、压力、声学特性(Vp和Vs、幅度和频率)及含水量等参数。经研究发现,温压法、超声探测法和TDR探测法都能灵敏探测沉积物中天然气水合物的形成和分解过程。分析认为,本次实验中水合物形成速率过快,只能宏观研究水合物对沉积物声学特性的影响,建议采用长岩心进一步研究沉积物中水合物的声学特性。     

BTEX异常对海域油气藏指示作用的研究

常规的油气化探方法一般是应用烷烃类作为油气勘探的基本指标,但是烷烃类易受人类活动和生物活动的干扰,使常规的化探技术在油气勘探中一直受到限制。人们开始考虑采用直接的生物标记化合物来预测油气藏,如芳烃系列中的苯系化合物苯(benzene)、甲苯(toluene)、乙苯(ethylbenzene)、二甲苯(xylem),简称BTEX。国内外研究表明,BTEX基本不受人类活动和生物活动的干扰,对油气藏具有良好的指示作用。依据南海某区的实测资料,采用自主研发的油气化探可视化评价软件进行数据处理,剥离背景异常,圈出有效的BTEX异常,并与靶区地层剖面进行了对比,结果证实了BTEX对海域油气藏具有良好的指示作用。     

南海东沙东北部甲烷缺氧氧化作用的生物标志化合物及其碳同位素组成

南海东沙东北部碳酸盐岩和泥质沉积物中的生物标志化合物组合及其碳同位素组成分析表明,研究区内甲烷缺氧氧化作用(anaerobic oxidation of methane-AOM)发育.研究区内碳酸盐岩中含丰富的AOM标志化合物,2,6,11,15-四甲基十六烷(Crocetane-Cr.)、2,6,10,15,19-五甲基番茄烷(Pentamethylicosane-PMI)和2,6,10,15,19,23-六甲基二十四烷(Squalane-Sq角鲨烷)的13C亏损强烈(δ13C值介于-74.2‰~-119.0‰PDB之间),表明碳酸盐岩形成于AOM,同时反映该研究区曾发生过强烈、持续的富CH₄流体释放活动.柱状泥质沉积物中,AOM生物标志化合物在硫酸岩-甲烷过渡带(SMI-Sulfate-Methane Interface)边界附近相对丰度高,SMI之上样品中含量低,或未检出,表明现代环境在SMI附近有大量嗜甲烷微生物生长,使得深部上升的甲烷被大量消耗,很少有甲烷逸出海底.AOM生物标志化合物可用来指示SMI边界.不同站位、不同岩性AOM生物标志化合物组成(包括碳同位素组成)的差异反映了嗜甲烷古细菌组成的不同.     

天然气水合物赋存区甲烷渗漏活动的地球化学响应特征

综述了天然气水合物赋存区甲烷渗漏活动的地球化学响应指标的研究进展,分析了应用单一指标识别甲烷渗漏活动各自所存在的问题,包括浅表层沉积物孔隙水中CH_4、SO_4~(2–)、Cl~–等离子浓度随深度的变化;浅层沉积物全岩W_(TOC)(W表示质量分数,TOC表示总有机碳)和W_(TS)(TS表示总硫)之间的相关性及比值;自生碳酸盐岩δ~(13)C和δ~(18)O;自生矿物重晶石、黄铁矿、自生石膏的δ~(34)S;有孔虫壳体和生物标志化合物的δ~(13)C等。结果表明孔隙水中的CH_4、SO4_~(2–)浓度及溶解无机碳的碳同位素组成可以用来识别目前正在发生的甲烷渗漏活动;而沉积物中的WTS、自生矿物的δ~(34)S、钡含量及其异常峰值和生物标志化合物的δ~(13)C等指标的联合使用可以更真实准确地反映地质历史时期天然气水合物赋存区的甲烷渗漏活动。因此,在实际研究过程中,可将孔隙水和沉积物两种介质的多种指标相结合。随着非传统稳定同位素(Fe、Ca、Mg等)和沉积物氧化还原敏感元素(Mo、V、U等)等研究的发展,甲烷渗漏活动地球化学响应指标的研究也将得到拓展,而多种地球化学指标的联合使用将为天然气水合物勘探及其形成分解过程识别研究提供重要的科学依据。     

南黄海西部地区浅层气的浅部埋藏地质背景

根据南黄海西部地区6000km多的浅地层剖面解释成果,对浅层气埋藏的载气地质体和地层时代两方面进行了分析。结果表明,南黄海西部地区浅层气主要存在于埋藏三角洲相、古湖泊相、古河道相、古潮沟相地质体中,在中更新世晚期以来的两期海相地层（全新世和晚更新世）和两期陆相地层（玉木冰期、里斯冰期）中都存在浅层气的地震反射。     

自然延伸概念及相关地质要素在海域划界中的影响效力分析

The United Nations Convention on the Law of the Sea entitled the coastal States to naturally extend the continental shelf, which has caused more drastic disputes of maritime delimitation. This paper devotes to clarifying the significant concept of natural prolongation through an effect method combing the legal principles and technical analysis. Firstly, the classic samples with respect of the development of geological features are traced. Based on these samples, the classification with a model is proposed in order to affirm the concept''s significance under certain geomorphologic situations. Lastly, scientific analysis is used to present two potential prolongation situations and emphasize that all the technical analysis on maritime delimitation should be complied with international law and protect the common interest of all the mankind.     

Pore characterization of organic-rich Lower Cambrian shales in Qiannan Depression of Guizhou Province,Southwestern China

Nine organic-rich shale samples of Lower Cambrian black shales were collected from a recently drilled well in the Qiannan Depression, Guizhou Province where they are widely distributed with shallower burial depth than in Sichuan Basin, and their geochemistry and pore characterization were investigated. The results show that the Lower Cambrian shales in Qiannan Depression are organic rich with TOC content ranging from 2.81% to 12.9%, thermally overmature with equivalent vitrinite reflectance values in the range of 2.92–3.25%, and clay contents are high and range from 32.4% to 53.2%. The samples have a total helium porosity ranging from 2.46% to 4.13% and total surface area in the range of 9.08–37.19 m²/g. The estimated porosity in organic matters (defined as the ratio of organic pores to the volume of total organic matters) based on the plot of TOC vs helium porosity is about 10% for the Lower Cambrian shales in Qiannan Depression and is far lower than that of the Lower Silurian shales (36%) in and around Sichan Basin. This indicates that either the organic pores in the Lower Cambrian shale samples have been more severely compacted than or they did not develop organic pores as abundantly as the Lower Silurian shales. Our studies also reveal that the micropore volumes determined by Dubinin–Radushkevich (DR) equation is usually overestimated and this overestimation is closely related to the non-micropore surface area of shales (i.e. the surface area of meso- and macro-pores). However, the modified BET equation can remove this overestimation and be conveniently used to evaluate the micropore volumes/surface area and the non-micropore surface areas of micropore-rich shales.     

Paragenesis of fluids under evaporates in the Volga-Ural Basin

To unravel the mystery of the relationship between evaporates, Ca–Cl brines and accumulations of oil and N₂ in the basins of ancient cratons, their N₂, CH₄ and He concentration ratios, as well as the isotopic composition (δ¹⁵N, δ¹³C and ³He/⁴He) were compared within the Volga-Ural basin. The study allowed subsalt fluids from Volga-Ural Basin to divide into two genetic groups. The first one is found within the basin's platform area. It includes Ca–Cl brines, high-viscosity heavy oil, bitumen and N₂, which has concentrations higher than that of CH₄ and positive values of δ¹⁵N. The second one is tied to the edge of the platform, the Ural Foredeep and Peri-Caspian Depression. In this group, only the oil and gas reservoirs, which have more CH₄ than N₂, and possibly negative values of δ¹⁵N, were discovered. Interaction of gas components in compared fluids indicates great role of degassing in the formation of their composition. It is suggested that the fluids of the first group (N₂ > CH₄) is what remains, and the second group (N₂ < CH₄) is what is disappears from the rocks during their metamorphism and degassing.     

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.     

Kilometer-scale fault-related thermal anomalies in tight gas sandstones

Upper Carboniferous sandstones make one of the most important tight gas reservoirs in Central Europe. This study integrates a variety of geothermometers (chlorite thermometry, fluid inclusion microthermometry and vitrinite reflection measurements) to characterize a thermal anomaly in a reservoir outcrop analog (Piesberg quarry, Lower Saxony Basin), which is assumed responsible for high temperatures of circa 300 °C, deteriorating reservoir quality entirely. The tight gas siliciclastics were overprinted with temperatures approximately 90–120 °C higher compared to outcropping rocks of a similar stratigraphic position some 15 km to the west. The local temperature increase can be explained by circulating hydrothermal fluids along the fault damage zone of a large NNW-SSE striking fault with a displacement of up to 600 m in the east of the quarry, laterally heating up the entire exposed tight gas sandstones. The km-scale lateral extent of this fault-bound thermal anomaly is evidenced by vitrinite reflectance measurements of meta-anthracite coals (VR_rot ∼ 4.66) and the temperature-related diagenetic overprint. Data suggest that this thermal event and the associated highest coalification was reached prior to peak subsidence during Late Jurassic rifting (162 Ma) based on K-Ar dating of the <2 μm fraction of the tight gas sandstones. Associated stable isotope data from fluid inclusions, hosted in a first fracture filling quartz generation (T ∼ 250 °C) close to lithostatic fluid pressure (P ∼ 1000 bars), together with authigenic chlorite growth in mineralized extension fractures, demonstrate that coalification was not subject to significant changes during ongoing burial. This is further evidenced by the biaxial reflectance anisotropy of meta-anthracite coals. A second event of quartz vein formation occurred at lower temperatures (T ∼ 180 °C) and lower (hydrostatic) pressure conditions (P ∼ 400 bars) and can be related to basin inversion. This second quartz generation might be associated with a second event of illite growth and K-Ar ages of 96.5–106.7 Ma derived from the <0.2 μm fraction of the tight gas sandstones.This study demonstrates the exploration risk of fault-bound thermal anomalies by deteriorating entirely the reservoir quality of tight gas sandstones with respect to porosity and permeability due to the cementation with temperature-related authigenic cements. It documents that peak temperatures are not necessarily associated with peak subsidence. Consequently, these phenomena need to be considered in petroleum system models to avoid, for example, overestimates of burial depth and reservoir quality.