遗传算法反演龙门山断裂带断层三维滑动参数研究

利用位错理论模型将遗传算法运用于断层三维滑动参数反演问题的求解,采用川西地区2004—2007年GPS观测数据对龙门山断裂带主要断层的三维滑动速率进行计算分析。结果表明：反演结果在量值上整体较小,与地质结果具有较好的一致性,走滑分量︱U1︱〈3.2 mm/a,倾滑分量︱U2︱〈1.54 mm/a,张开分量︱U3︱〈2.5mm/a,低滑动速率反映断层的闭锁及应力的积累及大地震发生的危险性;局部分量较地质结果偏大,反映实测GPS数据反演结果体现的是断层实时活动状态;遗传算法的全局收敛、不依赖初值等优点使结果更加稳定,而张开分量显示局部不规律性,表现出各子断层空间活动不均匀性。     

山东半岛蓝色经济区地质工作思路

提出山东半岛蓝色经济区地质工作部署原则,应坚持＂缺什么,补什么＂,突出海岸带,以环境地质工作为重点,以综合研究为主,增强成果实用性。具体实施内容为1∶10万地质调查评价、大比例尺基础地质调查、矿产资源潜力调查、地质环境监测和综合研究等,并就组织实施提出了保障措施建议。     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

An Eocene/Oligocene blueschist‐/greenschist facies P–T loop from the Cycladic Blueschist Unit on Naxos Island,Greece: Deformation‐related re‐equilibration vs. thermal relaxation

Geothermobarometric and geochronological work indicates a complete Eocene/early Oligocene blueschist/greenschist facies metamorphic cycle of the Cycladic Blueschist Unit on Naxos Island in the Aegean Sea region. Using the average pressure–temperature (P–T) method of thermocalc coupled with detailed textural work, we separate an early blueschist facies event at 576 ± 16 to 619 ± 32°C and 15.5 ± 0.5 to 16.3 ± 0.9 kbar from a subsequent greenschist facies overprint at 384 ± 30°C and 3.8 ± 1.1 kbar. Multi‐mineral Rb–Sr isochron dating yields crystallization ages for near peak‐pressure blueschist facies assemblages between 40.5 ± 1.0 and 38.3 ± 0.5 Ma. The greenschist facies overprint commonly did not result in complete resetting of age signatures. Maximum ages for the end of greenschist facies reworking, obtained from disequilibrium patterns, cluster near c. 32 Ma, with one sample showing rejuvenation at c. 27 Ma. We conclude that the high‐P rocks from south Naxos were exhumed to upper mid‐crustal levels in the late Eocene and early Oligocene at rates of 7.4 ± 4.6 km/Ma, completing a full blueschist‐/greenschist facies metamorphic cycle soon after subduction within c. 8 Ma. The greenschist facies overprint of the blueschist facies rocks from south Naxos resulted from rapid exhumation and associated deformation/fluid‐controlled metamorphic re‐equilibration, and is unrelated to the strong high‐T metamorphism associated with the Miocene formation of the Naxos migmatite dome. It follows that the Miocene thermal overprint had no impact on rock textures or Sr isotopic signatures, and that the rocks of south Naxos underwent three metamorphic events, one more than hitherto envisaged.     

中国南方2008年与2016年两次低温雨雪冰冻天气过程对比分析

利用2.5°×2.5° NCEP/NCAR月平均资料、1°×1° FNL再分析资料、国家气候中心1951年至2016年1月西太平洋副热带高压脊线和西伸脊点两项环流指数,从事件实况（降水、气温和冰冻灾害）、环流条件、能量条件、水汽条件和动力条件几个方面出发,对2008年1月10日至2月2日和2016年1月20至25日发生在中国南方的两次低温雨雪冰冻天气过程做了对比分析。研究表明：（1）"0801南方雪灾"的主要特征表现为降水范围大、过程持续时间长、灾害重;2016年1月低温雨雪冰冻过程的主要特征表现为降水范围小、过程持续时间短、灾害轻。"0801南方雪灾"冷空气强度不如2016年1月强。（2）造成"0801南方雪灾"的亚欧大环流背景为"北脊南槽"型,2016年1月低温雨雪冰冻的亚欧环流形势中低纬同位相,从西伯利亚到伊朗为脊,中蒙由低涡控制。（3）与"0801南方雪灾"相比,2016年1月低温雨雪冰冻期间我国南方对流层中下部10°~20° N的温差较强。（4）"0801南方雪灾"水汽输送偏北（到达34° N）且更高（到达300 hPa）,2016年1月低温雨雪冰冻期间水汽输送偏南（到达28° N）且较低（到达400 hPa）。（5）"0801南方雪灾"水汽输送轨迹在5 000 m、3 000 m和1 500 m高度均以西南路径为主,2016年1月低温雨雪冰冻期间水汽输送轨迹在5 000 m、3 000 m和1 500 m高度均以西北路径为主,冷空气沿着低压底部从西北移至南方变性增湿。（6）2008年1月26至28日整层垂直运动弱,但向上扩展高（至200 hPa）;2016年1月22日至24日垂直运动强,但扩展高度低（500 hPa以下）。     

吉林前郭5.8级震区上地壳速度结构

为了更好地研究吉林前郭地区的地震活动性,本文利用2013年10月至2015年2月吉林前郭5.8级震群周围17个地震台站记录到的405个地震事件资料,共获得2 218条P波走时数据和2 166条S波走时数据,采用地震双差层析成像技术,获取吉林前郭震区上地壳三维P波、S波速度精细结构。结果显示,震区上地壳速度分层明显,P波速度变化范围为5.8~7.2km/s,S波速度变化范围为3.4~4.0km/s,波速比(vP/vS)变化较小。震区有低速带穿过,低速带走向为北东向,倾角较大(近直立),纵向延伸至15km深度;震群主要位于低P波和S波速度区,对应较低的波速比。吉林前郭震区构造强度较低,受西太平洋板块俯冲产生应力场的影响,易于发生地震。     

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.     

新疆坡十铜镍硫化物含矿岩体岩浆源区特征及构造背景探讨

新疆坡北辉长岩体位于塔里木古陆东北缘的北山裂谷带中,坡一和坡十铜镍硫化物含矿超镁铁岩体位于坡北岩体内.尽管坡十超镁铁岩体与坡北辉长岩呈侵入接触,但两者的微量元素和同位素组成显示良好 的一致性,表明两岩相虽然分不同阶段侵入就位,但仍为同源岩浆的产物.MnO-TiO2-R2O5及Th-Hf-Ta判别图解显示坡北及坡十岩体的...     

胶南地区的伸展作用——以胶南—诸城一带为例

胶南地区的胶南—诸城一带存在两期不同方向的伸展构造。早期以形成近ＥＮ向的拉伸线理为特征，并在不同构造层次上显示出不同的变形。出露于研究区中部桃林尚庄隆起的含榴辉岩片麻岩中，主要以ＬＳ的组构为特征，显示出早期伸展作用下地壳岩石的垂直轴缩短、ＥＷ向拉伸的共轴应变；而在把下地壳含榴辉岩片麻岩与以变沉积岩为主的中上地壳岩石分开的韧性滑脱带上，此期伸展作用则表现为从东向西剪切的非共轴简单剪切变形，具有近水平的拉伸线理及近水平的ＥＷ向剪切褶皱和鞘褶皱枢纽。晚期伸展作用表现为近ＳＮ的伸展垮塌作用，形成向北和向南倾斜的两条韧性正剪切带，且遭受低角闪岩高绿片岩相条件下的透入性均匀简单剪切变形，剪切方向分别向北和向南。     

粤东梅州地区1：5万区调主要成果与进展

在粤东梅州地区完成的1：5万区域地质调查,对区内地层进行了多重划分和对比研究,理清了地层层序;将“兴梅混合岩田”解体为变质表壳岩和变质深成岩;采用双重填图法,查明了火山岩相、火山机构分布特征,划分了火山活动旋回;对侵入岩进行重新划分和研究,首次将永和北．三枫侵入体解体为超基性、中性和中酸性侵入岩;对构造形迹进行调查研究...