河北省物理地层界线厘定

以现代地层学多重划分为理论依据,以岩石地层单元组的密度、磁化率、剩余磁化强度及厚度加权算术平均值等物性参数为研究对象,以有序地质量最优分割方法为数学手段,进行河北省全区综合地层柱物理地层界线的厘定,并对其地质意义进行了初步讨论。     

土参数对桩基水平响应影响的研究

桩基的水平响应由桩土间的相互作用决定,通过采用p-y曲线来表示桩土间的非线性相互作用。通过算例,讨论分析了粘性土参数的变化对p-y曲线中土体的极限强度和刚度、桩基水平位移和弯矩分布及最大弯矩和水平荷载关系的影响。     

盾构近距离穿越施工对已运营隧道的扰动影响分析

基于盾构施工对周围土体及构筑物的扰动影响机理,通过实测数据对盾构近距离穿越扰动影响问题进行了定量分析,并讨论了运营隧道对各盾构施工参数的敏感性.研究结果表明盾构穿越对已建地铁隧道的扰动影响主要以隧道的竖向位移为主.随着盾构推进,隧道结构纵向上呈波浪状,其隆起峰值不断沿推进方向移动.盾尾后隧道段受盾构穿越的影响显著,但隆起峰值始终位于盾尾后.     

A New Model for Quantifying Anisotropic Scale Invariance and for Decomposition of Mixing Patterns

A new power–law function has been derived to represent the relationship between area of the set consisting of wave numbers with spectral energy density above S (A(>S)) on the two-dimensional frequency plane and S. The power–law relation holds if the field concerned possessing isotropic scale invariance or generalized scaling invariance involves rotational and ratio-scale changing transforms. The equation is valid for dealing with common exploration geophysical and geochemical fields encountered in mineral exploration and environmental assessment. This power–law function not only provides a new model for characterizing anisotropic scaling invariance for generalized scaling field, for example, estimating the power exponent of power spectrum of generalized scale invariance measure in frequency domain, but also forms a theoretical base for the S–A filtering technique developed for decomposing a mixing field into components on the basis of distinct scaling properties in the frequency domain. It is demonstrated that the method has potential to become a general technique for image processing and pattern recognition.     

A Sequence of Pan-African and Hercynian Events Recorded in Zircons from an Orthogneiss from the Hercynian Belt of Western Central Iberia--an Ion Microprobe U-Pb Study

Sensitive high-resolution ion microprobe U–Pb dating showsthat a biotite orthogneiss from the Hercynian belt of westerncentral Iberia contains 1000–300 Ma zircon. Older, 1000–570Ma ages within this range represent inherited, detrital materialamong which four age components may be recognized:     

Design of backfilled thin-seam coal pillars using earth pressure theory

In underground coal mining any increase in coal recovery rate is dependent on a decrease in pillar size. Backfilling is one way of reducing the required size of pillars and hence the volume of coal left underground. Therefore any comparisons made between a self-supported mine layout and backfill supported mine layout are based directly on pillar design. The most effective way to examine the effect of backfill on pillar support, and subsequently the rate of recovery, would be to incorporate the mechanisms of backfill support directly into the current design procedure for coal pillars. This paper presents a review of the mechanics of backfill support, a method of estimating the magnitude of that support based on earth pressure theory, and an example that incorporates backfill support into current coal pillar design.     

Gravity anomalies and associated tectonic features over the Indian Peninsular Shield and adjoining ocean basins

A combined gravity map over the Indian Peninsular Shield (IPS) and adjoining oceans brings out well the inter-relationships between the older tectonic features of the continent and the adjoining younger oceanic features. The NW–SE, NE–SW and N–S Precambrian trends of the IPS are reflected in the structural trends of the Arabian Sea and the Bay of Bengal suggesting their probable reactivation. The Simple Bouguer anomaly map shows consistent increase in gravity value from the continent to the deep ocean basins, which is attributed to isostatic compensation due to variations in the crustal thickness. A crustal density model computed along a profile across this region suggests a thick crust of 35–40 km under the continent, which reduces to 22/20–24 km under the Bay of Bengal with thick sediments of 8–10 km underlain by crustal layers of density 2720 and 2900/2840 kg/m³. Large crustal thickness and trends of the gravity anomalies may suggest a transitional crust in the Bay of Bengal up to 150–200 km from the east coast. The crustal thickness under the Laxmi ridge and east of it in the Arabian Sea is 20 and 14 km, respectively, with 5–6 km thick Tertiary and Mesozoic sediments separated by a thin layer of Deccan Trap. Crustal layers of densities 2750 and 2950 kg/m³ underlie sediments. The crustal density model in this part of the Arabian Sea (east of Laxmi ridge) and the structural trends similar to the Indian Peninsular Shield suggest a continent–ocean transitional crust (COTC). The COTC may represent down dropped and submerged parts of the Indian crust evolved at the time of break-up along the west coast of India and passage of Reunion hotspot over India during late Cretaceous. The crustal model under this part also shows an underplated lower crust and a low density upper mantle, extending over the continent across the west coast of India, which appears to be related to the Deccan volcanism. The crustal thickness under the western Arabian Sea (west of the Laxmi ridge) reduces to 8–9 km with crustal layers of densities 2650 and 2870 kg/m³ representing an oceanic crust.     

Curve-Fitting Schemes for Fragmentation Data

Fragmentation measurements in the form of sieve passing and mass fraction data were used to test the capability of three different distributions to fit the observed data over a wide range in fragment size and mass. These distributions were based on Rosin-Rammler, lognormal and simple sigmoidal (S-shaped) functions, having 2 input parameters for the single-component versions and 5 input parameters for the two-component versions. Provided convergence was achieved in the non-linear curve-fitting technique, the two-component versions always provided superior fits to the observed data. However, these versions were very sensitive to variations in the values chosen for the input parameters. In this particular regard, the two-component sigmoidal function was the most robust. The present results also show that the two-component lognormal function provided the best fit to the fragmentation data in a general sense, and the two-component Rosin-Rammler function provided the worst fit. However, there was not a significant difference between any of the three methods.     

The structural role of Ti in aluminosilicate liquids in the glass transition range: insights from heat capacity and shear viscosity measurements

The shear viscosities and 1 bar heat capacities of glasses and melts along the 67mol% silica isopleth in the system SiO₂-Al₂O₃-Na₂O-TiO₂ have been determined in the temperature ranges 780-1140 K and 305-1090 K respectively. Anomalous behaviour of both these properties is observed for compositions rich in TiO₂ and/or Al₂O₃, an observation attributed to liquid-liquid phase separation followed by anatase crystallization. For samples which do not show anomalous behaviour, it is found that the partial molar heat capacity of the TiO₂ component previously determined in Al-free compositions reproduces our heat capacities to within 1.3%. Viscosity data show that addition of TiO₂ tends to increase viscosity and melt fragility at constant temperature. Furthermore, heat capacity and viscosity data may be combined within the framework of the Adam-Gibbs theory to extract values of the configurational entropy of the liquids and qualitative estimates of the variation of the average energy barrier to viscous flow. Configurational entropy at 900K is inferred to decrease upon addition of TiO₂, in contrast to previous results from Al-free systems. The compositional limit separating normal from anomalous behaviour, as well as the data for homogenous melts have been used to constrain the structural role of Ti in these samples. Our data are consistent with a majority of Ti in five-fold coordination associated with a titanyl bond, in agreement with previous spectroscopic studies. Furthermore, we find no evidence for a Ti-Al interaction in our samples, and we are led to the conclusion that Al and Ti are incompletely mixed, a hypothesis consistent with the observed reduction of configurational entropy upon addition of TiO₂, suggesting an important role of medium range order in controlling the variations in thermodynamic properties.     

青藏高原的水塔功能

青藏高原是维持我国乃至东亚地区生态系统的重要水塔。高原平均海拔在4000m以上,与周边地区形成了巨大的地势差。高原东南部不仅具有丰富的降水,而且在3500m以上以冰川雪被形态储存了巨大的水资源,因此,高原具有重要的水塔功能。基于高原潜在输出总水量和不同海拔区域水体所具有的势能两个方面,建立了高原水塔功能的模型,从而利用GIS方法,通过对我国1∶400万系列图和相关资料的统计分析,计算出高原不同高度带贮存的大气降水、冰川储水量、湖泊水量以及工农业用水量。计算结果表明,青藏高原冰川湖泊的淡水储量达39921×108m3,其中冰川储水量为39228×108m3,可利用湖泊储水量为693×108m3,平均每年由降水获得的水资源量为8495×108m3,高原工农业用水量为129×108m3。因此,高原的输出水量即出境河川径流量为6870×108m3。高原储水主要分布在海拔3000～5000m间,与高原周围相比,平均势差在2000～4000m间,最大的势差达5500m。水体具有巨大的势能,在势能的作用下,自然向周边区域输送汇集,维持着周边地区的生态过程和社会经济活动,因此,青藏高原的水塔功能对于周边地区的生态系统和社会经济系统是极其重要的。