广西沿岸海平面变化的关联维数研究

采用相空间重构和关联维数方法，研究了广西沿岸月平均海平面变化的分形特征，结果表明，相空间重构的延迟时间τ为3△t，当关联维数趋于饱和时，石头埠，北海和龙尾的相空间维数为7，而涠洲岛为9，它们的关联维数平均值平均值分别为6.6507,6.5414,6.7059.     

海岸线长度与分维在不同比例尺地图上的变化研究

结合国内外海岸线分形研究进展 ,以江苏省海岸线为例 ,系统地探讨了不同比例尺地图上海岸线长度与分维的变化及其规律。指出海岸线长度与地图比例尺之间存在有 lg L =algk b的基本关系 ;其次 ,对于同一条海岸线来说 ,使用量规法和网格法计算所得分维结果是不同的 ,使用量规法的计算结果大于使用网格法的计算结果 ;再者 ,在不同比例尺地图上 ,同一海岸线的分维是不同的 ,随着地图比例尺的逐渐变小 ,海岸线分维相应地逐渐变小 ,且在不同比例尺间使用量规法计算所得海岸线分维结果的差值大于使用网格法计算所得海岸线分维结果的差值     

GIS平台下分形维数计算的设计开发和应用

GIS作为一种新兴的技术在空间数据处理和解析方面具有强大的扩展功能,已经在测绘领域得到了广泛的应用。本文针对分形维数计算的问题,在GIS平台下基于空间数据模型提出了该问题的解决方案,并利用通用COM技术设计和开发了分形维数计算系统。该系统成功地应用于工程实践,对今后GIS在相关专业领域更深层次的应用具有一定的借鉴意义。     

泥石流堆积物的粒度分布及其分形结构

泥石流堆积物主要由砾石、砂砾、粉粒和粘粒组成,组成泥石流堆积物的颗粒级配变幅很大,从直径大于数十米的巨砾到肉眼难以看见的几微米的胶体微粒均有分布,大小颗粒粒径之比可达106—107。泥石流堆积物颗粒具有明显的自相似性和无标度区间。本文以小江流域多处泥石流堆积物为研究对象,采用图解法全面分析了泥石流堆积物的粒度组成特征,根据分形理论计算了泥石流堆积物颗粒的分维值,对泥石流堆积物的分形特征进行探讨,并与泥石流堆积物粒度特征相联系,发现分维很好的反映了泥石流堆积物颗粒组成及其粒度分布特征。将泥石流堆积物颗粒分维与泥石流的粘性、形成年代等性质相联系,以找出它们彼此之间的关系。     

Spatial analysis of elements in soils from Chengdu City

Three kinds of spatial analysis methods （geostatistics, concentration-area fractal model and the multifractal analysis called the moment method） were used for almost 50 elements, including heavy metals, disperse elements, rare elements and even others, in 6586 top soil （0-20 cm） samples and 1833 deep soil （150-200 cm） samples from Chengdu metropolitan area of 12400 km^2, southwestern China. The ranges of spatial correlation revealed by variograms are quite different for different kinds of elements in the top and deep soils. The most interest is the fact that the multifractal spectra of environmentally important elements such as Pb, Cr, Cd and Ni in top soils in the metropolitan area show systematic change from those in the deep soils, revealing a strong anthropogenic addition, while Hg, Zn, As, Cu and all common elements show no such kind of addition. In terms of multifractal properties based on the multifractal spectrum curves, those disperse and rare elements show great deviation from other major and trace elements, which is also of great interest.     

Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.     

西北地区泥石流沟形态因素的非线性分析——以兰州市为例

以兰州市区96条主要的泥石流沟为例,利用分形理论的统计自相似性对泥石流沟数的累计分布随沟谷形态要素沟道比降、汇水面积和沟道长度的变化进行了分析;并与不同流域形态要素的分维进行了比较,探讨了分维不同的原因。兰州市区泥石流沟三个形态要素均具有统计意义上的自相似性,其中以汇水面积显示出分维最小(0.46),沟道长度次之(0.71),沟道比降最大(1.09)。分维的大小描述了作为系统的沟谷及其泥石流的形成的空间结构,即分形结构,同时也反映了不同形态要素对系统所起作用的差异,分维越小,所起作用越显著。其结果对西北干旱半干旱地区石流灾害的进一步研究与防治提供了新的思路。     

应用航磁数据分维计算推断火成岩的分布

计算巴彦浩特盆地航磁异常的分维数, 对计算出的分维数绘制等值线图, 并根据分形特征对该地区的火成岩进行划分, 得到了以往直接对航磁异常图进行推断解释所不能得到的良好地质效果。最后讨论如何选取最佳窗口和最佳网格来计算分维数, 并对此提出了2个经验。     

Interpretation of single-well tracer tests using fractional-flow dimensions. Part 1: Theory and mathematical models

Generalized equations using fractional-flow dimensions were derived to estimate the Darcy and seepage velocities obtained from the point-dilution and the single-well injection-withdrawal field tests conducted in fractured-rock aquifers. Seepage velocities can only be estimated from single-well tests if the hydraulic conductivity and the hydraulic gradient are known a priori. However, if a radial-convergent test is also performed between two boreholes, the kinematic porosity can be estimated and be used to estimate the seepage velocity from the single-well test results. To apply the generalized equations, the flow dimension and the extent of the flow region must be known. Therefore, the generalized radial flow (GRF) model of Barker (1988; a generalized radial flow model for hydraulic tests in fractured rock. Water Resour Res 24(10):1796–1804) is used to estimate the flow dimension because of its wide range of applications. A pumping test performed on the boreholes will yield an estimate of the fractional-flow dimension by applying the GRF model. Electronic Publication